Used Automatic Tyre Changer Machine for sale (79,715)

Condition: good (used), Year of construction: 2013, BAR CUTTING MACHINE TRAUB A 25 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight: approx. 0.7 t Space requirement: approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Bjdpfx Agjwc Amxelscu Motor speeds: 1400-2800 Bar loader available!

Year of construction: 2024, condition: like new (used), Great die-cutter (easy to operate), simpler than a cylinder :) automatic die-cutter Max. paper size: 1060 x 760 mm Min. paper size: 400 x 370 mm Max. die-cutting size: 1050 x 750 mm Speed up to 7,500 sheets/hour Max. die-cutting force: 300 t Max. sheet thickness: corrugated board up to 4 mm, cardboard 0.1 - 1.5 mm Bcedpfxjyarb Ss Aglsu

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Bcodpfx Agsyaq S Asleu Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 9012, total height: 4,200 mm, ram adjustment: 100 mm, installation height: 630 mm, total width: 5,100 mm, total length: 2,000 mm, pressing force: 400 t, clearance between the columns: 3,000 mm, overall weight: 65,000 kg, DGUV certified until: 01/2027, year of last overhaul: 2026, punching force: 400 t, The machine is partially overhauled and completed. The control system will be built according to the customer's requirements (Siemens control). Bcodpfx Aox U Ur Roglju

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Bcjdpfx Aeycqhcoglsu Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, CORMAK BS320H is a robust, industrial semi-automatic metal band saw designed for efficient cutting of steel and large cross-section workpieces. It is a professional semi-automatic band saw that performs perfectly in manufacturing plants, metalworking shops, tool rooms, and maintenance departments—anywhere repeatability and high productivity matter. The BS320H model operates as a universal metal band saw as well as an efficient band saw for pipes and profiles. It easily handles cutting bars, profiles, sections, channels, angles, and pipes, delivering a clean cutting line and smooth operation. It belongs to a class of machines chosen by customers as reliable and durable metal band saws for everyday use. Key advantages of the CORMAK BS320H Semi-automatic cutting cycle – operator comfort, reduced workload, and high repeatability in series production. Wide cutting capacity – cutting of workpieces up to 320 × 195 mm, ensuring efficient workshop and production use. Rigid, stable construction – reduced vibration, improved cutting accuracy, and extended blade life. Ideal for cutting pipes and profiles – precise cuts with minimal burrs and no material overheating. Designed for intensive operation – reliable performance in manufacturing companies and steel cutting services. Applications The CORMAK BS320H metal band saw is recommended for: manufacturing plants and structural fabrication companies (profiles, sections, steel components), metalworking shops and tool rooms, maintenance departments, steel cutting services (repeatable series), cutting pipes and profiles as a dedicated band saw for pipes and profiles. Why choose this band saw? If you are looking for a reliable machine for daily operation, the CORMAK BS320H is a proven semi-automatic metal band saw that increases productivity, improves repeatability, and allows faster job completion. It is one of those machines that genuinely reduces labor costs thanks to predictable, stable operation. Technical specifications Type: Semi-automatic band saw Arm lifting/lowering: Hydraulic, infinitely variable Blade speed: 37.5 / 75 m/min Miter cutting range: from −45° to +60° Vise: Hydraulic Minimum cutting diameter: Ø 5 mm Bodpfoychwnox Aglecu Minimum clamping length: 30 mm Vise base height: 950 mm Blade size: 27 × 0.9 × 2680 mm Total power: 1.5 kW Dimensions (L × W × H): 2000 × 860 × 1500 mm Weight: 250 kg

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Condition: very good If you have any questions or need more information, feel free to send us a message or give us a call. Bcjdpfxoycxyao Aglsu

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Bcsdpswvbk Ajfx Aglsu Material width: 60 mm Material height: 70 mm *

Year of construction: 2024, condition: new, The FL-430 automatic labeler is perfect for fast and automatic labeling of flat products. The friction feeder allows products of different thickness, dimensions and material to be easily and reliably separated. Bcsdpfjickh Rsx Aglou - LCD display - Standard speed of up to 30 m/min. and a max. label width of 140 mm in combination with the friction feeder 400 installed. - Extended version dispensing labels with a max. speed of up to 50 m/min. and a max. width of up to 260mm - Transparent labeling possible

Condition: excellent (used), Year of construction: 2016, Professional automatic packaging system from a renowned European manufacturer. Suitable, for example, for packing food products, technical goods, print and paper products, household items and toys, as well as textiles. The machine can be used in various industries such as beverages, food, chemicals, wine & spirits, cosmetics, detergents, wood, textiles, and graphics. It is capable of packaging diverse products including glass and PET bottles, cans, cartons, trays, jars, and boxes of various sizes. The shrink wrap machine is equipped with multiple monitoring sensors, light barriers, and photocells for automatic process control. User-friendly LCD control panel with extensive functions and setting options, such as automatic and setup modes, 20 memory slots for different packaging formats, piece counter, packaging performance calculation, and communication functions. Technical data: - Maximum product dimensions: width up to 760 mm x height up to 380 mm - Suitable for LD-PE film from approx. 20 to 100µm thickness - Maximum film roll width: 750 mm flat film Bsdpfx Agsxxzzkolscu - Packaging performance up to 10 units per minute - Working height approx. 940 to 1100 mm - Motorized unwinding of bottom and top film - Transport rods made of heat-resistant fiberglass - Frequency-controlled shrink tunnel belt with adjustable speed - Adjustable air flows in the tunnel - Cooling fan at the outlet of the shrink tunnel - Conveying rollers for product centering at the machine's outlet - Low energy consumption - Connected load: 3 x 400 V / 50 Hz / 3 phases - Machine dimensions approx. L 2.6 x W 1.3 x H 2.1 to 2.2 m - Weight approx. 600 kg The machine was in operation for only a few weeks for a specific order. Afterwards, it was taken out of service and placed in storage.

Condition: used, Automatic Tube Bending Machine Brand: B.L.M. Model: B/90/M Bsdpfx Agjx Swbiolscu Description: Automatic tube bending machine designed for industrial applications, equipped with automatic programming for producing multiple bends in sequence. The machine allows adjustment of the reference distance, ensuring high precision and repeatability in the bending process. For all technical details, please refer to the technical data sheets available in the photos.

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Bcodpfx Agswltr Rjlsu Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour • Convenient and fast product changeovers • Max. product dimensions: 600 x 400 x 240 mm Bcodox Tp H Tepfx Agleu • Machine dimensions: 2,480 x 1,240 x 1,675 mm • No compressed air required! • Doors on both sides of the machine • Machine interior equipped with lighting

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually Bodpfed S Uhqox Aglecu ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Strapping machine, packaging machine -Through hole: 500 x 500 mm Bedpfx Agjb A Ibcolecu -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping.

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Bcedjfh R Tyjpfx Aglsu Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: Bcsdpofibfasfx Aglsu start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW Bcjdpfx Asfibd Tsgleu 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N Bjdpfx Asfh R Tuoglecu

Condition: good (used), Year of construction: 1998, functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, working width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Bjdpfeq Ikhpex Aglecu Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: excellent (used), Year of construction: 2016, Automatic labeller STS S2-Zeta with two labelling stations, for equipping labelling and back labelling on two separate separate labelling stations. - Year of construction: 2016 - Capacity : 1'000 bts/h - for cylindrical bottles, Ø 60 à 110 mm - Thermal head - Crimping head - Speed variator for the crimping head - Synchronised capsule dispenser with chute - Machine on wheels with brakes - 2nd pass photocell for label detection Bedpfev S Trfex Aglecu - Photocell in the output for accumulation - Drive, deflection, accumulation table 500 x 800 mm - Machine in very good condition

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Bsdpjx Triwofx Aglocu Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Bcjdpfsxvbvvox Aglou Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Bcjdpfx Aeb Rz R Usglsu Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector Bcedpfx Age Ry Hujlou A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine