Used Axis Module for sale (13,732)

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m Redpfx Aeu Idbyjg Iop NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° Rsdpsu Ndbpjfx Ag Isp feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: excellent (used), Tool milling machine DECKEL FP 1, three-axis digital readout TNC 113, from educational institution Redpfoyln Irjx Ag Iop - CE marking - Travel X / Y / Z 300x160x340 mm - Heidenhain TNC 113 / plug-in control - Spindle speed range 40 - 2000 rpm - Infinitely variable feed in all three axes - Rapid traverse in all three axes - Vertical head adjustable by 100 mm - Vertical-horizontal milling facility - Tool holder ISO 40 - Drive power 1.5 / 1.9 kW - Fixed angle table - Chip tray - Coolant system - Work light - Documentation Dimensions: LxWxH 1.3x1.2x1.7 m / Weight: 950 kg Errors and omissions excepted

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Rsdoymg Iyepfx Ag Iep

Condition: used, Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Rsdpfx Aju Rii Ujg Ijp With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Dematic conveyor system Accumulating roller3000-600-540 RA2361/61.1 Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 3000 mm Condition: good (used) Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Accumulation slot size: 625 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 62,5 mm Wheel diameter: 50 mm Partly rubberized for more grip when braking Rjdpfxsvyvg Us Ag Iep Drive module RA2361: Drive types: SEW geared motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides element length can be shortened up to 3m Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, TGW Roller Conveyor 2400-475-420 RA2436 Make: TGW Year of manufacture: 2000 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Module length: 2400 mm Diameter rollers: 50 mm Distance between rollers: 75 mm frame height: 115 mm 40 modules available. Optional: Drive station with deflection supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Rsdpfx Agoxv Hayo Ijp Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 1997, operating hours: 20,000 h, Kuka KR 30/2 6-Axis Industrial Robot Manufacturer: KUKA Model: KR30-2 Rated total load: 30 kg Reach: 2000 mm Repeatability: ± 0.15 mm Controller: KUKA KR C1 (01-051-810) Kuka Teach Pendant KR C1 Weight: 867 kg Year of manufacture: 1997 Rsdpfx Ajxgqmlog Iop Operating hours: Approx. 20,000 Robot Applications Loading and unloading of parts Machining Handling of parts Polishing Arc welding Palletizing Robot movement speed: Axis 1: 140º/s Axis 2: 126º/s Axis 3: 140º/s Axis 4: 260º/s Axis 5: 245º/s Axis 6: 322º/s Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Bosch DM 4K 7101-D, servo module Amplifier module 1070079646-208 Item condition: Used, in perfect condition Shelf(2)B-7_EK(BOR) Redok Szy Uopfx Ag Iep Financing through our bank is also possible. komplett-konzept.leasingo.de More modules- new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel mm: 730 Y axis travel mm: 510 Z axis travel mm: 510 B axis (degrees): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size mm: Ø500 Table load capacity kg: 300 Cutting feedrate mm/min (X, Y, Z): 50,000, 50,000, 40,000 Maximum rapid traverse m/min (X, Y, Z): 50, 50, 40 Spindle speed rpm: 12,000 Spindle power kW: 18.5 / 15 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine capacity: 61 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 750 Through-spindle coolant (bar): Yes Rodpsydh Hljfx Ag Iop EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil skimmer Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software MACHINE DIMENSIONS Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Rsdpoydcvzsfx Ag Isp Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Rsdpfx Asgabu Uog Iop

Year of construction: 1998, condition: excellent (used), CNC-4 Axis Fully Programmable Manufacturer: SCHNEEBERGER TYPE:12 SMG-100 year 1998 Spindle holder : BT50 with hydr.tool clamping Center height : 210 mm Rsdpfx Aemu An Tjg Iep Spindle motor from FANUC (We also have a controller for but it is not in the offer costs EXTRA) ( From CNC tool grinding machine SCHNEEBERGER GEMINI ) Dimensions: Width : 450 mm Depth: 450 mm Height : 320 mm Weight ca.200 KG. In very good condition.

Year of construction: 2004, condition: ready for operation (used), X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible. Rodpfeylbq Hjx Ag Iop

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Redpfx Ajylbqysg Iep

Condition: good (used), PLC control, digital input -Manufacturer: Siemens, Simatic S7-200 EM 223 -Type: 6ES7 223-1BF00-0XA0 / 6ES7223-1BF00-0XA0 -Quantity: 1 module available Redpfxjyc Rx Uo Ag Ijp -Dimensions: 105/80/H60 mm -Weight: 0.2 kg

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Modula ML50 Vertical Lift Module – Excellent Condition – Buyer to Remove – Ideal for Warehousing, Aerospace, Engineering & E‑Commerce This Modula ML50 Vertical Lift Module is being sold directly by a UK PLC following a site reconfiguration. The unit is in excellent working condition, has been professionally serviced, and offers a highly efficient automated storage and retrieval solution for operations looking to optimize space and improve material flow. The ML50 series is known for its reliability, high load capacity, and fast picking performance. This unit is suitable for aerospace, automotive, engineering, logistics, e‑commerce, medical device distribution, and any environment where space efficiency and accuracy matter. Key Specifications Model: Modula ML50 Net Payload: 500 kg Tray Dimensions: 4,100mm (Wide) x 654mm (Depth) Software: Modula WMS / Copilot interface (specify version) Year of Manufacture: 2017 Condition: Fully operational, excellent mechanical condition Availability: Immediate Location: UK Important Note Rodpfx Ageyiaq Dj Iep Buyer is responsible for all decommissioning, dismantling, and removal from site. Access details and site constraints can be provided on request. Inspection available by appointment Machine is currently installed and can be seen in operation

Condition: like new (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 180 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Eding CNC, spindle speed (min.): 20,000 rpm, input voltage: 220 V, number of axes: 4, Equipment: rotational speed infinitely variable, For sale is a compact BZT CNC milling machine (E-ST series) with a fully enclosed safety housing. The machine features a 3-axis configuration including a 4th axis (rotary table) and is suitable for precise milling operations in aluminum, plastics, and non-ferrous metals. Key features include: robust machine frame, T-slot table, frequency-controlled high-speed spindle, manual pulse generator (MPG), integrated frequency inverter, safety limit switches, and clean internal wiring. The machine is in well-maintained optical and technical condition. Rjdeykvp Ijpfx Ag Iep

Condition: new, Year of construction: 2025, shaft length: 1,070 mm, laser power: 60 W, type of cooling: air, Laser Engraving Machine with 60 Watt Laser Power New demonstration unit - 60 Watt MOPA laser (enables color laser engraving on stainless steel) - Incl. 4th axis (rotary unit) - Incl. Windows 10 Pro 64-bit PC system - Incl. 22" monitor - All software and hardware pre-installed and calibrated - Engraving software in German - Very user-friendly operation - Plug and play – ready to use immediately - 60 Watt fiber laser source for high-contrast, fast marking with extremely high resolution (see photos) - Deep engraving up to 4mm possible (even in hardened steel) - Wobble function, e.g., for cleaning metal components - Suitable for engraving on many metals (stainless steel, brass, aluminium, etc.) and a wide range of plastics - Heavy-duty industrial quality - Complete system / immediately operational - Working area approx. 500 x 600 x 600mm (WxDxH) - Clamping surface with mounting threads in 50mm grid - LED work area lighting - 50mm port connection for fume extraction - Engraving area approx. 180 x 180mm (expandable up to approx. 300 x 300mm) - Incl. foot switch for starting the engraving process Please also ask about our attractive leasing/financing offers. Redpfx Agjfkgq Ne Iop Sale is exclusively to commercial customers. Delivery / advice / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Rodpfxsw R Syis Ag Iop

Condition: new, Year of construction: 2026, functionality: not functional, input voltage: 420 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 6,680 mm, number of axes: 9, number of slots in tool magazine: 15, total height: 4,100 mm, total length: 7,920 mm, total width: 9,000 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, WatMachinery NHSB 3517 5-AXIS is a fully automated stone-processing production system engineered as a self-contained manufacturing cell. It integrates loading, multi-technology cutting, automatic part transfer, contouring, and finishing into one controlled process chain. By automating workpiece transport and positioning and executing machining operations in sequence, the NHSB 3517 increases throughput, improves repeatability, and reduces variability associated with manual handling and operator-dependent setups—delivering consistent quality shift after shift. Built on a compact platform that combines a 5-axis sawjet and a 5-axis CNC contouring center, the machine supports diamond blade cutting for high-productivity straight and profile cuts, an independent 5-axis waterjet for internal geometries and tight radii, and hybrid strategies that use both technologies for optimized edge quality and process stability. The production cycle begins with ergonomic slab loading via a tilting table, followed by material alignment including vein-oriented positioning for visual matching. Primary cutting and separation are performed with automatic selection of blade, waterjet, or combined cutting. Parts are then transferred through an automated handling sequence using a vacuum manipulator system with eight vacuum cups (lifting capacity up to 500 kg / 1,100 lbs), enabling safe and stable slab and workpiece manipulation. A dedicated finishing workflow completes the process with automatic positioning on suction-cup fixtures, followed by unloading without manual intervention. The 5-axis head assembly is configured for multi-operation processing and includes a diamond cutting spindle, an independent 5-axis waterjet head, and multi-head edge-finishing units for efficient flat-edge polishing, supported by vacuum handling plates for secure, repeatable part manipulation. An integrated slab washing apparatus cleans the surface before vacuum operations to improve grip reliability and positioning stability. The machine can be supplied with an on-board camera (accuracy ±5 mm) to capture slab images for software-based nesting and defect avoidance, and probing systems such as a laser probe and stone perimeter probing to enhance dimensional accuracy and alignment. The industrial CNC controller features an operator-friendly HMI, supports DXF import and G-code execution, and also provides a manual mode for quick operations and simple cuts. Designed for manufacturers producing countertops, bathroom elements, stairs, and architectural stone components, the NHSB 3517 5-AXIS delivers higher automation, reduced manual labor dependency, and measurable gains in productivity and process consistency. Rjdsylkf Tepfx Ag Isp

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Rjdpfsya Dtmox Ag Iop

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Redpfx Aex S Si Ijg Iep Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 Rodpfovw Uqajx Ag Ijp - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable Rodpfx Ajwvf Theg Isp - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.