Baler vertical buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
Pneumatically driven vertical baler, compactor, mobile waste press, paper press press Eed0xfl Answer completely made of stainless steel Press for cardboard, tin cans and other bulky voluminous waste the filling opening width mm height of the filler opening press Chamber width 1200 x 800 mm Chamber with Edelstahlbeälter for big bags Container height 1300 mm - Behältebreite 980 mm - Behältelänge 1130 mm-max press print ca 2,2 to -incl. 27 x big bags -Automatic back lift of the pressing plate... more
3
approx. 1,1 t + pressure 20 t + inlet opening 1,130 x 560 mm + bale dimensions 1,130 x 730 x 860 to 1,110 mm 7ypscekyo more
5
Vertical baler, trash compactor, mobile waste compactor, paper Press dual-chamber press for cardboard, tin cans and other bulky and voluminous waste-width of the fill opening 1150 mm height of the fill opening 400 mm bale chamber width 1200 x 800 mm ball height 1500 mm face width 1200 mm Ball Length 800 mm Automatic return stroke of the pressing plate after pressing backup of the charging door during the pressing operation with safety switch-Efficient strapping means of continuous polyester tape... more
4
The vertical baling press HSM V-Press 860 S is specially designed for crushing hard plastics (housing monitors and TV) and the plastic of expanding strongly (in the case of other materials, please contact the manufacturer). Double the number of claws optimizes the compaction of the material and reduces the number of filling cycles. Padded crushing and closing the door. Particularly robust mechanical ejector chain. Technical parameters: Depth: 1076.0 mm Width: 1797.0 mm 2ybhzqsqo Height: 298... more
5
REFURBISHED IN PRODUCER'S FACTORY IN MAY 2017! Pressing power: 540 kN C7i8ksi70 Press cylinder ø: 150/110 x 950 mm (full stroke: 1150 mm) Compression time with return stroke: 43 s (~ 52 s) Bale size (WxDxH): 1200 mm x 800 mm x max. 1200 mm Bale weight (cardbord): 420 - 450 kg Rated power: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Rated current at: 15.5 A Output RPM: 1450 min -1 Protection mode: IP55 Total fuse protection: 3 x 25 A (K, C-Characteristics) Oil volume: 27 l Oil type: Multig... more
3
KK Balers vertical baler, type Mini Baler - Dimensions 1040 x 750 x 2335 mm - Transportation height 1800 mm - Machine weight 270 kg - Feed aperture 700 x 500 x 735 mm - Bale dimensions 550 x 750 x 600 mm Ssmbvg - Bale weight up to 75 kg more
6
Vertical baler baling press paper press Brand: HARLEY Umwelttechnik Type: KBP 15 Tonnage: 20 tons built in 2006 Motor power: 3 kW / 400 v / 50 Hz Cycle time: 65 s Jivt2bfp Dimensions: 1470 x 1650 x 2510 (l x d x h) Weight 1300 kg Machine in the serviceable, according to age, very good condition. Ready to use. Machine stood unused in a garage since 2007. Machine is sold without warranty or guarantee. You can visit the machine in 75334 Straubenhardt, d 11 and try out. more
5
HSM 75 VL Second-hand machine Machine height – 2150 mm Weight of the machine - approx. 670 kg Year of construction - 1992 Engine - 2,2 kW Pressure - 9 to Machine no. - 6108.114.00763 G Bale format - 900 x 600 x 550 mm Bale weight - approx. 70-120 kg Filler - 900 x 600 mm Filling height - 600 mm Bales / hour performance - 4-8 ball Dimensions T x B - 1100 x 820 mm Type - 75 VL 8iell8cy0 more
3
Press pressure 9 tons Ball Power 4-8 / hour pressing time including return stroke 21 sec Press chamber size W 900 x D 600 x H 1050 mm Loading aperture W 900 x H 600 mm Max Ball Size 900 x 600 x 550 mm Bale weight 70 -.. 120 kg, depending Material according motor 2,2 kW, 380 V, 50 Hz External dimensions W x D 820 x H 1100 2150mm filling height 600mm Weight 670 kg S0bzarlf more
6
Producer: HSM Typ: 45 VL Presskraft: 5 t Td7vswij Anschluss: 400 V Ballengroesse: ca. 70 x 50, h 45 cm Masse: 75 x 85, h 210 cm more


baler vert...
every day

New machines via email!

Be informed!
6
New machine! Pressing power: 532 kN Press cylinder ø: 150/110 x 950 mm (full stroke: 1150 mm) Compression time with return stroke: 46 s (~ 57 s) Dj7hquism Bale size (WxDxH): 1200 mm x 780 mm x max. 1200 mm Bale weight (cardbord): 380 - 480 kg Rated power: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Height of feeding opening: 1100 mm Size of machine: L x W x H 1746 x 1244 x 2986 mm Machine weight: 1940 kg Warranty condition: 3 month This means only sending spare part in case of proven ope... more
6
Ntg9mcsdgVertical baler press Motor 230 V, 50 Hz, 10 A Bale format 500 x 800 mm h Exterior dimensions 980 x 740 x 1950 Pressure 3 ton Strapping by hand Weight of machine 310 kg more
4
New machines. Pressing power: 532 kN Press cylinder ø: 150/110 x 950 mm (full stroke: 1150 mm) Compression time with return stroke: 46 s (~ 57 s) Bale size (WxDxH): 1200 mm x 780 mm x max. 1200 mm Bale weight (cardbord): 380 - 480 kg Rated power: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz 8tbv7vtq9 Height of feeding opening: 1100 mm Size of machine: L x W x H 1746 x 1244 x 2986 mm Machine weight: 1940 kg Warranty condition: 3 month This means only sending spare part in case of proven op... more
2
GTG Mahlberg type G1 - vertical baler No. 90/47 Type: G1 Motor: 1.5 kW, 380 v Filling Chamber: 700 x 600 x 850 mm height I3clfrb Setting: 3 + 2 Machine weight: 200 kg Please request price more
3
Loedige (Loedige) baler, vertical 2 chamber baler Technical data: pressing chamber size (cabinet) 600 x 700mmx 900mm Engine 1,5 kW Tying 3 + 2 overall heigt 2.050mm Machine dimension 1.680 x 880 x 2.050 mm Ogfo8mtkh checked and ready to work ----- Prasa pionowa ----- more
4
Machine height - 3170 mm Width - 1600 mm Depth - 1300 mm Masch. No. 617 00 125 02 Year of construction 1997 machine - 1700 kg weight Engine - 5.5 kW Pressure - 25 to Eqbkf3d Bale weight - 250-320 kg Filler - 1200 x 670 mm Filling height - 1310 mm Setting - 4 x Machine is in access and is available in 1-2 weeks overhauled available. more
5
Vertical baler Pressure 18 to Year of production 2001 7gry2ksle bale weight 120 - 180 kg strapping 4-fold vertical, manuell Overhauled and in a good condition more
5
height of machine - 2270 mm weight of machine - 940 kg Year of construction - 1994 Motor - 4 kW, 380 V pressing pressure - 16 to Bale weight - 110 - 200 kg Loading opening - 1100 - 590 mm bale binding - 4-fach - vertikal Output per houer - 4 - 8 exterior dimensions - 1450 x 926 mm Ftzztg2 filling space - 1100 - 700 x 1130 mm more
1
Elect./Voltage: 9vmxu2faz CRAM-A-LOT DX-42C CLOTHING VERTICAL BALER -- 15 HP motor -- 8"" Cylinder -- 54"" Stroke -- Cycle time 58 sec -- Platen force 120,600 lbs -- Bale size 42"" W x 30""D x 48""H -- Bale weight (OCC) 1,000 lbs -- LOADED ON YOUR TRUCK more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dvvmwa CRAM-A-LOT DH-60 LU VERTICAL BALER -- 7"" Cylinder -- 10 HP motor -- bale size 60"" x 30"" x 48"" -- Bale weight 1,100 lbs -- Loaded on your truck more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Djjrwhb GOUIN BOUREGARD GB-60 VERTICAL BALER -- 10 HP motor -- (2) 3"" Cylinder -- Bale 60"" x 30"" -- Test and Paint more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 0vui3ba WASTEQUIP 6030HD VERTICAL BALER -- 10 HP motor -- 6"" Cylinder -- 48' Cylinder stroke -- Bale weight 800 to 1,000 Lbs OCC -- Bale size 60"" x 30"" x 48"" -- Feed opening 27-1/2"" x 60""Rebuilt cylinder, tested fully functionalAll safety switchesPrice is Loaded on your truck more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 7w330h7oo MARATHON V-6030HD VERTICAL BALER -- 10 HP motor -- 6"" Cylinder -- Bale size 60"" x 30"" x 48"" -- Auto-Eject / Wire guides -- Loaded on your truck more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 9iqbuusyb INTERNATIONAL / CONSOLIDATED CLOTHING BALER STDS-1 -- Chamber size 16"" x 30"" -- Chamber depth 44"" -- 5 HP motor -- 15 Sec. cycle time -- 5 Tons total pressure -- Machine is in like new condition more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 7zjc8lhsd CONSOLIDATED DHWS-7 VERTICAL CLOTHING BALER -- 7"" Cylinder -- 20 HP motor -- Transformer for 600 Volt -- Baling chamber 60"" W x 31"" D x 48"" H -- Loaded on your truck more
5
x-travel ? mm y-travel ? mm 737bk0c9f z-travel ? mm control GE Fanuc OM weight of the machine ca. ? t dimensions of the machine ca. ? m more
3
Table size 900 x 380 mm Number of pallets 2 Movement x-Axis 800 mm y-Axis 410 mm z-Axis 510 mm Number of tools in magazine 30 pieces Maximum spindle speed 8.000 min Tool taper MAS BT 40 CNC Control Mori Seiki MF-M4 (Fanuc 0-M) Ctyq2jcc more
3
faceplate diameter:1500 mm swing diameter:1600 mm turning height:1950 mm max. ram stroke:1000 mm faceplate rotation speed limits:1 -240 U/min rapid speed:6 m/min Evmfinhts feed speeds:1 - 6000 mm/min total power requirement: kW weight of the machine ca.:18 t dimensions of the machine ca.:4,5 x 5 x 6,1 m with CNC NUM 1060 T splash guarding, chip conveyor diverse toolholders more
5
Round baler, baler pick-up width 1.2m without cutting dimensions 4100/2100/H2550 mm weight approx 2000 kg 3owieuiz more
3
saw blade diameter 300 mm cutting diameter 150 mm stroke 200 mm cutting width 150 mm Cutting height 105 mm Motor output 2,2 kW saw blade turning speeds 40/80 U/min weight 200 kg total power requirement kW Cnk2ea3q weight of the machine ca. t dimensions of the machine ca. m more
5
faceplate diameter 7100 mm swing diameter 8000 mm turning height 3240 mm distance between table and cross rail 3250 mm workpiece weight 150/180 t faceplate turning speed range 0,22 - 20,1 U/min Ps2wbi main drive motor 125 kW cross rail adjustment - vertical 2890 mm cross travel 4400 mm swivel range of slides - vertical +30 / -15 ° Control NUM 1060 total power requirement 125 kW overhauled in 2008 und equipped with new Elektric and CNC Control NUM 1060 2 rams on crossrail more
4
x-travel ? mm y-travel ? mm z-travel ? mm 737bbi7le Control GE Fanuc OM weight of the machine ca. ? t dimensions of the machine ca. ? m more
6
x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control Siemens 810 D 3D turning speed range - milling 8.000 U/min power capacity - milling spindle 13 kW max. torque on the spindle 83 Nm tool taper SK 40 Tool changer 20 pos. rapid traverse 25 m/min tool changing time 1,6 sec table load max. 1.000 kg table surface area 1.200 x 560 mm T-slots 5x 14 x 100 mm Documents Coolantsystem direct probing Chip conveyor Signal-Light Machining Center - Vertical 3rtkfd3jo DECKEL MAHO - DMC 10... more
3
max. ram stroke:320 mm throat: mm table diameter:630 mm main drive:11 kW Ughb8a7pn cross adjustment:510 mm long. travel of table:650 mm total power requirement:15 kW weight of the machine ca.:6,0 t dimensions of the machine ca.:3,1 x 2,2 x 3,1 m more
5
We have a Johnford VMC 1300 HD vertical miling machine in stock. The machine is in good condition, been running only 1 shift. Including 4th axis. Cabinet is included, but it is disassembled because of shipment. Specifications: x-travel 1300 mm y-travel 850 mm z-travel 710 mm CNC-control FANUC series 18-M table-size 1500 x 750 mm max. table load 3270 kg spindle taper ISO BT 50 DIN 69871 spindle turning speed range 10 - 4500 U/min feed stepless 1 - 8000 mm/min B97xsp9a rapid traverse 15 / 15 /... more
6
machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink Bajq2htpgc type: RISZ 6x1000 built in: 1994 stroke 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal mac... more
6
turning diameter 250 mm swing diameter 320 mm turning height 250 mm control SIEMENS 840D rapid traverse X-axis 100 m/min rapid traverse Z-axis 45 m/min spindle diameter in front bearing 120 mm Torque 210 Nm Ywu22izpu number of spindle speeds 20- 5.000 U/min tool turret 12 -fach Number of working hours 73949 h spindle hours 25814 h total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. 5 x 6 x 3 m Vertical lathe GILDEMEISTER CTV 250 V4 C-axis Number of drive... more
5
x-travel 550 mm Edx3cbkie y-travel 300 mm z-travel 425 mm Control Fanuc O M weight of the machine ca. 3.5 t more
4
x-travel 1.250 mm y-travel 600 mm z-travel 550 mm Ev9yqgvj control Fanuc O-M Main spindle: Max. rpm 8.000 min/-1 power capacity - main spindel 19 kW tool taper SK 40 work table: table surface area 1.400 x 650 mm max. table load 1.400 kg T-slots 5x 18 x 125 mm distance spindle nose and table 150 / 700 mm distance spindle center to column 655 mm Tool-Presetter: number of toolpositions 21 pos. tool taper SK 40 total power requirement 21 kW weight of the machine ca. 9,5 t dimensions of the... more
5
faceplate diameter:1250 mm swing diameter:1600 mm turning height:1250 mm ram head dimension:250 x 210 mm Fn2abip max. ram stroke:1000 mm feed speeds:0,1 - 2000 mm/min rapid traverse:6 m/min faceplate turning speed range:4 - 400 U/min cross rail adjustment - vertical:800 mm main drive:56 kW total power requirement:90 kW weight of the machine ca.:30 t dimensions of the machine ca.:9 x 5 x 5,5 m CNC SIEMENS 840 D hydrostatic guideways X and Z-axis C-axis driven tooling 16 - 1600 rpm 22,5 kW twin... more
5
x-travel:635 mm y-travel:510 mm z-travel:460 mm control:HEIDENHAIN TNC 620 table surface area:790 x 560 mm speeds:1 - 8000 U/min spindle taper:SK 40 spindle motor:8,5 / 13 kW feeds:1 - 20 000 stufenlos mm/min rapid traverse:25 m/min Gcnk23hl numbers of positions in the tool changer:20 spindle hours:8 862 h total power requirement:15 kW dimensions of the machine ca.:1,9 x 2,8 x 2,5 m weight of the machine ca.:3900 kg more
6
hydraulic internal vertical broaching machine manufacturer: Karl Klink type: RSI 12 x 1250 built in: 1970 Bai8tds3i0 stroke 1250mm pulling force: 12.000KG working stations: 3 PCs drive: hydraulic system equipment: magnetic chip conveyor, coolant system Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm strok... more
5
turning diameter 1250 mm swing diameter 1250 mm turning height 1000 mm Ht88zjrn0 x-axis 1330 mm z-axis 800 mm turning speeds 1000 U/min workpiece weight 3000 kg rapid traverse 12 m/min main drive motor 63 bei 100% kW distance spindle head - tool holder 1485 mm control SIEMENS 840C rapid traverse 12 m/min feeds of compound slide-rest 10 - 12000 mm/min total power requirement 95 kW weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,8 x 3,4 m - CNC control SIEMENS 840C - 1 ve... more
3
turning diameter 200 mm swing diameter 250 mm turning height 350 mm control Siemens Sinumerik 840 D spindle diameter in front bearing 100 mm feed range 0,1 - 20000 mm/min Dnihz0lbo rapid traverse 20 m/min stroke of vertical slide 300 mm spindle head DIN 55026 - Size A 6 50 - 6500 1/min Speed range drive tool 0 - 3000 1/min total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. 4,5 x 4,0 x 3,5 m equipped with: - CNC Control Siemens 840 D - Tool turret for... more
6
x-travel 760 mm 9lhtvdsf2 y-travel 510 mm z-travel 520 mm a-axis 360 0 c-axis -30/+110 0 spindle turning speed - stepless 12000 U/min more
4
max. wheel diameter:630 mm gear width:425 mm max. module:10 table diameter:550 mm table hole:125 mm cutter length max.:215 mm min. number of teeth:8 workpiece length - max.:825 mm dist. milling spindle - table surface:50 - 425 Grad milling slide swivelling:240 Grad spindle turning speed range:62 - 390 U/min tangential adjustment:200 mm axial-feeds:0,4 - 6,8 mm/U radial feeds:0,1 - 1,7 mm/U cutter diameter max.:192 mm total power requirement:20 kW weight of the machine ca.:8 t Br8vi8ce dimensi... more
6
faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 1-1000 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m Latmp machine is in an excellent condition!! with div. acessories (photo... more
6
hydraulic internal vertical broaching machine manufacturer: Karl Klink type: RSI 16 DT built in: 1969/ 1991 refurbished by manufacturer Yrmxbw stroke 1250mm pulling force: 12.000KG working stations: 3 PCs drive: hydraulic system equipment: magnetic chip conveyor, coolant system Information about us: we are specializedfor second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock vertical and horizontal machines from 3000kg up 63.000kg pulling fo... more
3
x-travel:1230 mm y-travel:355 mm z-travel:440 mm total power requirement:12 kW table-size:1600 x 400 mm tool taper:SK 50 speeds:28 - 1400 U/min feed - longitudinal/cross:16 - 2500 mm/min Xobmxvax feeds Z-axis:12,5 - 1000 mm/min weight of the machine ca.:4,2 t dimensions of the machine ca.:1,9 x 4,0 x 2,2 m more
5
thread capacity NA thread pitch NA mm throat 200 mm bore diameter M 8 mm bore depth 50 mm control Wechselräder stroke 50 mm 8l83o3hx9 total power requirement 0,5 kW weight of the machine ca. t dimensions of the machine ca. m Automatic Tapping Machine as Pillartype, Gears, Coolant more


baler vert...
every day

New machines via email!

Be informed!

to

to

Change search
BALER VERTICAL
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close