Barreto 918 for sale
Identified location: Ashburn (US) (Edit)
6
new
Item condition new in stock
Damaged paint
Ozfege2v
Warranty 12 months
Speed 4800 RPM
1.15 kW
Protection class (IP65)
In stock: 1 piece, available immediately more
13
15
15
3
single needle upholstery sewing machine
- stand new
- table new
- 230 V servo motor new
- thread trimmer
- backtack
- quick stroke
- footlifter
- 2nd stitchlenght
- LED sewing light
Bgo2p8hecq more
12
as good as new (ex-display)
For sale 2 pcs. Newport 2930-C Dual channel optical power meter.
Commonly used to measure laser diode performance as a test station or integrated into an automated measurement system, the 2930-C power meters work with Newport's free field sensors, providing flexibility for all laser power measurements. Easy-to-install sensor adapters accept industry standard fiber optic connectors for high-precision power measurements. In addition, low-noise detectors and seven gain ranges allow continuous power... more
11
1 pcs for sale. Newport 2930-C and 1 pc. 2935-C Dual channel optical power meter. The instruments were not used yet.
Used as a bench-top test station or integrated into an automated measurement system, the 2930-C power meters work in conjunction with Newport's free-space detectors to provide flexibility for all laser power measurements. Easy-to-install detector adaptors accept industry-standard fiber optic connectors, yielding high-accuracy power measurements. Additionally, low-noise detectors a... more
5
5
1992
used
welding fume filter, welding fume extraction, solder fume extraction
-Drive 1.1 kW
-Connection 380 V 50 Hz
-Flow rate 700 m3 / h
G9d9qp
-max pressure 1,600 Pa
-Inlet diameter 200 mm
-Outlet diameter 250 mm
-1x suction available
-Prize piece
-Dimensions 1320/655 / H1275 mm
-Weight 192 kg more
12
3
Capacity: 1,3 hl/h
alcohol removment: 4,8 -0,5 %-vol
pH: 2 - 5
Pressure: 50 bar
Ptkxy3
equipment: Feed pump, tube bundle recuperator, Pre filter, tube insulating diaphragm, high pressure piston pump, control cabinet, installed electric power 12,5 kW, 4 hl/h possible with extension of the modules more
6
used
Electric motor with flanged hydraulic pump
DAIKIN hydraulic pump with SIEMENS electric motor
Biiyiwdd2m
DAIKIN axial piston variable displacement pump
Type: J-V70SA3BRX-60
Ident-No. 783134 Make No. J102012425
Operating pressure: 210 bar (Pmax.)
Hydraulic maximum pressure: 315 bar (at 10% of cycle and 6 sec. peak load)
Flow rate: 69.8 cm³/rev, approx. 100 litres/min. at 1465 rpm.
with pressure and flow regulator (35-210 bar)
Flange connection discharge side: Ø 1 1/2 ".
Hole spacing for flange con... more
6
15
7
6
Mobile workbench with vice
offer number: 19075
Make : GARANT
Type : 91800
Technical data:
- Worktop approx. W 940 x D 540 mm
- Worktop thickness approx. 20 mm
- Working height 840 mm
- 5 pcs. extendable drawers
- Height of the drawers approx. 1 x H 180 mm ; 2 x H 110 mm , 2 x H 60 mm
- Drawer width approx. 500 mm each
- Drawer pull-out approx. 90
- one pc. Wing door
- Vise
Bhlzephb3o
- Contents various spanners, Allen key, etc.
- Space requirement approx. W 1050 mm x D 540 mm x H 840 mm
- ... more
7
4
2000
as good as new (ex-display)
Precision tension compression load cell with digital display
9180 digital indicator for strain gauge, potentiometric, DC/DC sensors and standard signals
High measuring accuracy, 2 displays for min - and max peak, RS 232 or RS 485, tare and HOLD function
Features
Up to 8 sensor parameters can be saved (option)
For force, pressure or torque measurements using strain gauge sensors
For distance and angle measurement using potentiometric or DC/DC sensors
Processing of standard signals ± 1 V / ... more
5
new
6
Produkt: Bieffebi
Typ: Mirage 309-180
Mfbln
Die Breite des Zylinders 1800mm
Drucken Wiederholungsbereich: 230-1000mm
Ungefaehre Geschossflaeche : 2,8 x 1 x 1,5 m
Ungefaehre Gewicht: 1500 kg cca more
15
3
vice
Bgoxj0wamo
Make Chick machine tool
Length 500 mm
Width 150 mm
Height 130 mm
Weight 22 kg
Age estimated
Jaw width 150 mm more
2
Make V. Tonazzi & C. Milano, Type Colibri 40, No 04891896, New 1989, Material Stainless steel, Automatic tube filler (1x), Suitable for aluminium tubes , Dosing 3-300 Ml, Tube diameter 10-50mm, Tube length 50-200mm, Capacity max. 2400 p/Hr, With closing head , With ejector , With motor ± 1,0 KW, 380 Volt, With variable speed drive , With hopper , With format sizes (± dia. 25mm), With switch , Floorspace 1,2x0,8 M, Total height 2,0 M, Weight 450 KG, Extra information with format size: (± dia. 25m... more
10
2013
used
Vehicle data - Make: BT - Type: RRE140 - Drive type: Electric - Load capacity: 1400kg - Load centre: 600 - Lifting height: 6300 mm - Range: 0 mm - Year of construction: 2013 - Hours of operation: 5491 - Internal no.EL4918 _____ Mast data - Mast type: Triplex - Lifting height: 6300 mm - Height: 2720 mm - Free lift: 1960 mm - Fork carriage: 0 mm - Forks: 1150 x 100 x 40 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 2720 mm - Weight: 3700 kg _____ Battery
Izy0aifp more
11
Equipment / Additional information:
Stitcher AGR- T (with hohner heads) // Serien.No: 21.274.1363
Folder PA- t// Serien.No 22.32.4.1213
Trimmer TR- T// Serien.No: 32 21 11 0918
N0giz more
3
2014
good (used)
Ident-Nr.: 01-09182, Inventar-Nr.: 10-1100669-0, Masch.-Nr.: 101, mit Unterdruck-Bandfiltereinrichtung, div. Pumpen, mit Verrohrungssystem, Filterfläche ca. 6 m². mit aufgesetzten Tanks und Plattenwärmetauschern
1 integr. Schmutzbehälter, Volumen ca. 20 m³
1 Sauberbehälter, Volumen 3 m³
Nsptb more
15
VW Crafter
1 piece VW Crafter , VW Crafter, colour white, EZ 19.01.2015, FZ-ID-No: WV1ZZZ2EZF6024423, Diesel, Km-Stand approx. 303922
N0ay2
Item number: 000068918 more
6
2016
used
[...]: 6516
Device details:
Load capacity : 2000 kg
lifting height : 200 mm
Mast type : Standard
mast height : 940 mm
length/width/roof height : 3060 / 790 / 1200 mm
Overall height : 1200 mm
Operating weight : 918 kg
**Further equipment information.
We are happy to offer you the appropriate transport.
Another 250 - 300 forklifts, attachments and sweepers are available for you immediately.
Bifwjprssu
Of course also for rent!
We are happy to buy your OLD one.
*** Special offer hand pallet truck... more
2
Make Draiswerke GmbH Mannheim, Type FH-80 EST, No 49184, New 1978, Material Stainless steel, Working pressure 0 Bar, Vacuum possible , Working pressure jacket 4 Bar, Pan material Stainless steel, Planetary mixer (1x), 2 Mixing/kneading shafts , With scraper , Motor 13,5 KW, 380 Volt (Ex), With variable speed drive , With cover , With pan , Capacity 80 Ltr, Pan sizes dia. 490x450mm, Outlet dia. 45mm, With jacket (21 Ltr), With hydraulic lifting , With vacuum pump make Leybold-Heraeus, Motor 1,35 ... more
5
Mercedes engine as good as new with 0 km, bus versionEngine type: OM422Mercedes Model: 422 918Performance: 280 PSBcondition for the purchase conclusion is a business-commercial activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are made exclusively on the basis of our General Terms and Conditions:www.au... more
7
ready for operation (used)
Siemens 6FC5210-0DF22-0AA0 PCU 50 Version E SN:T-TN2009187 ,used, normal signs of usage, 100% functional, scope of delivery according to photos
Biuuza2imf more
4
Exhibition machineYear of construction: 2019Equipment and technical data: Extendable workpiece support 600 mmjoining trimming unit FG 201 with 2 trimming heads2 pcs. Slide jointing cutter 70 x 48 x 30 mm Z 2+2edge feed 1903Glujet 301 Glue application system with touching nozzleAutomatic reloading functionStorage shaft for 4 cartridgesPrinter unit 1912-3 pneumaticCut-off unit 1918 (60 mm ) pneumaticSuction hoods for cut-off unitMilling unit FR 201 Bünidg, Radius and Radiusoutlet scraper blade uni... more
5
used
Original Scania spare parts, Scania Spareparts:
Quantity x Article number
J3nxpb
1x Scania 1117253
2x Scania 392309
1x Scania 1366255
10x Scania 1380834
10x Scania 1349018
10x Scania 321991
5x Scania 353625
2x Scania 353628
5x Scania 1434808
20x Scania 182931
3x Scania 1469812
2x Scania 157837
1x Scania 551364
2x Scania 353628
1x Scania 383744
4x Scania 1376303
2x Scania 1387022
4x Scania 1383831
2x Scania 1371661
20x Scania 804670
5x Scania 1385211
... more
1
2007
used
Vehicle data - Make: RMF - Type: KSL70G - Drive type: LPG - Load capacity: 7000kg - Load centre: 600 - Lifting height: 3600 mm - Range: 0 mm - Year of construction: 2007 - Hours of operation: 9183 - Internal no.1566 _____ Mast data - Mast type: Standard - Lifting height: 3600 mm - Height: 2650 mm - Free lift: 0 mm - Fork carriage: 1485 mm - Forks: 0 x 0 x 0 mm _____ Dimensions - Length: 3000 mm - Width: 1480 mm - Height: 2650 mm - Own weight: 10150 kg _____ Battery
Mupews more
![[...] Born - Reactor](https://cdn.machineseeker.com/data/listing/img_400x300/15/4339715.1582595441__.jpg)
![[...] Born - Reactor](https://cdn.machineseeker.com/data/listing/img_400x300/15/4339715-2.1582595441__.jpg)
2
Make [...] Machinefabriek Born, No 04336 / 179180, New 1990, Material Stainless steel 1.4571 (316Ti), Working pressure 3 Bar, Vacuum possible , Working pressure jacket 4 Bar, Reactor (1x), Capacity 6200 Ltr, Vessel sizes dia. 1900x1640mm, Conical bottom , Dished top side , Manhole /hand hole dia. 240mm, Top connections dia.250mm+6xdia.40mm+2xdia.50mm+2xdia.80mm, Outlet dia. 125mm, With jacket (3x 70 Ltr), Max. temperature -20/+155 Degr. C., With gate type stirrer make Ekato, type EM-100, Motor 1... more
2
ᐸpᐳGarbage truck
Make: DAF
Model: 75250
Mileage: $199,112
Km dated 10/07/2019
1st registration date: 05/01/2009
Year: 2009
Wine number: XLRAG75PC0E854026
Matis: 6832
Motorization:
Engine cubic capacity: 9186 cm³
Power: 183.00 kW
Gearbox: Automatic
Euro 5
Bi0vjo3o8e
Suspension: Pneumatic or mechanical
Number of seats: 3
Number of axles: 3
Tires wear: 5 mm maximum Grooves
Maximum allowable Sledge hammer: 29500 kg
Garbage Hydraulic press
Make: Rosroca
Model: Cross
Garbage press Dimensions: 720 cm ... more
10
12
1999
ready for operation (used)
The machine has been in use until the end and will soon be replaced by a new one.
Equipment:
automatic roll magazine 1902
Glue station with cartridge 1906
pneumatic printing unit 1913 Pneu
capping aggregate 1918
Milling unit 1942 M - flush and 2 mm radius
Scraper unit 1929
buffing unit 1944
A special feature of this machine is the retrofitted surface scraper unit.
Bijckry97e
workpiece thickness 8-45 mm
workpiece width min. 60 mm
workpiece length min. 180 mm
Edge thickness rolled material 0.3 - ... more
5
2007
used
Pillar jib crane, hall crane, workstation crane
-Bearing capacity 1000 kg -
-with chain hoist SWF type SKB0802203FNU400517020N
Bgovwslyxc
-Unloading 4015 mm
-Total height 3918 mm
-Main stroke 4.0 m / min
-Fine stroke 1.0 m / min
-Transport dimensions 4325/1040 / H1470 mm
-Dead weight 1030 kg more
6
Used machineCondition: 2010Condition: top overhauled!feed speed infinitely variable 10-18 m/mincontrol edge control 19 with 18,5" touchscreen color screenfeeding unit 1802edge feeding 1901glue application station cartridge 1006MG, groping nozzle with automatic glue height adjustmentPrinting unit 1913 pneumaticCross-cut unit 1918Multifunctional trimming unit 1826 MOT 6 with 6-servo-axes for flush, raidus and chamfer trimmingCopy trimming unit 1983Radius scraper unit incl. pneumatic adjustment 192... more
2
Make APV Chemical Machinery Ltd, Type PGX 30, [...] 800471, Material Stainless steel 1.2379 (X153 CrMoV12), Stainless steel, Double screw extruder , Number of hours 19187, Screw diameter 30mm, L/D 10, Co-rotating , Water cooling , AC-motor 4,0 KW, With variable speed drive , Screw speed (161rpm), Feeding with hopper dia.340mm x400mm, Feeding with metering screw K-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW, Wit