Drill-Saw Line

BEHRINGER VERNET HD-X 918 – HBP 410/923G

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. Dedorr Sqlopfx Agdscb The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

Condition: new, Year of construction: 2025, Patented mitering system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic clamping of the material High-performance frequency-controlled band drive Swivel range 30° right / 45° left Dcsdpfsh S Nxpjx Agdob Cutting range in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remaining piece length without bundle clamping 60mm Recommended options: Micro spray device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Dcedpfxjwlkwwo Agdob

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Dedpjihpn Nsfx Agdocb Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Dcsdsk R T Nmspfx Agdeb

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm Dodpfx Agsx H Tt Djdecb distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Pallet Changer 2 pos. - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: new, Year of construction: 2025, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Dcjdpoq Ulxysfx Agdsb Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Year of construction: 2012, condition: refurbished (used), MAZAK laser cutting machine STX510 MkIII 4kW ==TOP CONDITION – OVERHAULED 2023== year: 2012 refurbished, MAZAK lasercutting machine with 4000W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table Dedpfxjnwmw Se Agdecb FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster == option: warranty, setup, training == == option: fully automatic loading/unloading CELL system ==

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m Dcjdjd Izmaepfx Agdeb CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 Dodpfeu E U Hbox Agdscb MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.