Band saw

MEBA 405 DG

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will Gjdpfx Abjfg E Hpersin driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system Giedpovkkl Tsfx Abrsn - Automatic switch-off - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice Gijdpfxefg E Hlj Abron • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 2012, x-travel 1600 mm y-travel 4000 mm z-travel 1200 mm Gsdpfx Aexcbhxsbrsin workpiece weight 3500 kg

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction Gisdpem Rlb Nofx Abron safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Godpfx Aefibd Tebrsin Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 Godpfx Abou R R Avsrjin 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge Gijdji Igi Sjpfx Abron • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material Gjdpfx Asd Iipmebrsin 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm Giedpfjrz Tutox Abrjn - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition