Base holder buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
"Accessories, toolholders and clamps for CNC SCHMALZ INNOSPANN QUAD-BASE-R Ckiqzuug Weight kg: 4" more
5
Workbench, worktable for machines, Assembly bench -With Toolholder SK 40 Width 1250 mm Depth 725 mm Height table 1035 mm Vrajyy Total height 2050 mm Weight 250 kg more
3

Toolholder UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool taper:50 tool clamping area: mm Cyn07h7x weight:0,04 t 18 arbors partly with cutters ISO 50 more
3
tool adaptor SK 50 diameter of tools max. 0 mm Yqnvp8 turning speeds 0 U/min adjustment range: Grad These are various tool holders SK 50 DIN 69871 They can be put together individually. Prices 40% of new price. The following pictures are available: 1 pincer 2-16 (410E) 70mm; 9 pcs. Pliers 2-16 (410E) 100 mm; 2 pincers 2.5-25 (462E) 100mm; 10 pcs pliers 2,5-25 (462E) 70mm; 3 pincers 2.5-25 (462E) 120 mm; 4 pcs. Pliers ER16 (426E) 100 mm; 3 pincers ER16 (426E) 160mm; 1 St. Weldorn 6 - 63mm; ... more
7
Large anvil with base weight approx. 340kg Anvil approx. Base approx. 140kg Lnq2n more
15
sold is a used, fully functioning Optimum lathe OPTI D 240 x 500 G with Quantum quick change tool holder SWH1-A - 3384307. leading- and feed rod for cutting threads or automatic longitudinal turning 3-jaw chuck Ø 125 mm centre height: 125mm centre distance: 550mm high-Performance and maintenance-free motor incl. machine base condition: see pictures scope of supply: see pictures Phmgnnd full VAT invoice! collection possible in 84172 Niedererlbach, shipping on request! no guarantee... more
3
turning diameter over bed:520 mm turning diameter over slide rest:310 mm turning length:1000 mm centre height:255 mm spindle head:DIN 55027 Gr. 8 spindle bore:62 mm spindle turning speed range:18 - 900 U/min total power requirement:5,5 kW Bcsivigde7 weight of the machine ca.:2,6 t dimensions of the machine ca.:3,0 x 1,1 x 1,3 m more
5
Cabinet with drawers, tool Cabinet, steel workshop Cabinet -with 30 units SK50 tool holders -with iso50 die block Psjhni Width 715 mm depth 610 mm height 1250 mm drawers inside dimensions mm Drawers height mm Drawers with full extension Drawers can be converted -with doors Weight 124 kg more


base holder
daily

New machines via email!

Stay updated!
3

Toolholder UBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area:ISO 40 mm weight:0,003 t Dmjefkl more
3
tool adaptor 30 mm F9v09kd diameter of tools max. 16 mm turning speeds 3000 - 6000 U/min coolant über Spritzdüsen new drive adapter 04.8140.3330.1 sutable for CNC lathes TRAUB TNS30/42D. ID nr. 5928/06 more
6
We offer you, toolholders VDI 50 in the package. Ptbbxa Piece: 42 This 7 piece without teeth Tool holders were stored canned, but we have checked every bolt. No retail possible! Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are s... more
4
ebraucht of bearing resolution 1 x cast iron table base - TOP! -Industrial quality. State / variation possible. A total of 12 pieces available - price is for 1 piece! Total height: 920 mm Gesasmtbreite: 510 mm Feet per Lxw: approx. 200 x 145 mm Surface: Lxw: 510 mm x 120 mm 2q97we Weight: approx. 50 kg each Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
2

Vacuum-base-plate FEZER VLM-VC-500M/4-90E

Göppingen, GermanyGermany dealership location
6699 km
2011
used
length unbk. mm width unbk. mm Grsqrk9 height mm more
4
-Base IB ST ZF 24 DO 32/2 - Ord decentralised INTERBUS-S NO. -2750170 without module electronics -41 PCs in stock -18 euro PCs B9ryolwy more
2

Toolholder DIVERSE MK Aufnahmen

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area: mm Vg3m8zr9a weight:0,1 t Diverse MK toolholders as a single tool or in a package for sale more
4
movement longitudinal 140 mm height 500 mm width 200 mm support for lathe with spindle Ftzt8rt moving distance aprox. 140mm, hight approx. 500mm, width approx. 200mm, hight without steel holder 105mm foundation plate 200x 200mm, width of guiding sledge 160mm more
2
9d778vizy foundation base for EWD frame saw types 500 Hub fits for GXV / GXW / GDZ 500 more
6

tilting spindle moulder Lazari Base 45

Egenhofen / Herrnzell, GermanyGermany dealership location
6816 km
1998
good (used)
Tgslprqbl Type: BASE45 Used Machine Swivel: Yes / -5 to 45 ° 30mm diameter spindle speeds: 5 Height adjustment: manual tilt adjustment: manual Year of construction: 1998 Location: Warehouse / 82281 Herrnzell more
3
1 x used chisel holder/heavy lathe manufacturer: Bush type: A1300 Year of construction: 1980 weight: 280kg Length: 1300mm 8 x various adjustment options Qmkkyxoky more
5
heavy chisel holder, tool holder, rotary tool, turning tool holders, tool holders, chisel Xtwnlcbcx -1 x recording -2 x turning tool -1 piece of Ø140x1500mm -1 piece Ø 90 x 1400 mm -Water internal cooling Transport dimensions 1650/800/H450 mm Weight 370 kg more
2

Toolholder Diverse

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area:diverse mm 97vnfsru3 weight:0,1 t appr. 50 ISO 40 arbors, package or single sale more
3

Toolholder TRAUB

Nuernberg, GermanyGermany dealership location
6749 km
used
tool taper Ikhfcb7 shaft cross cut 30 tool taper total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Tool Holder VDI30. - 23 pc. Boring-bar holders (Ø8, 10, 16, 20, 25, 32mm) - 8 pc. Holders for collet chucks ER 20 (ohne Spannzangen) - 3 pc. drill chucks - 24 pc. holders for turning-tools (14 pc. right; 10 pc. left) - 2 pc. holder for hob-extruding-punch - 1 pc. multi-sided striking tool - 9 pc. driven tools more
3

Toolholder KOMET FG IV

Tönisvorst, GermanyGermany dealership location
6366 km
used
tool clamping area 150x18 mm weight 0,001 t 9wutpuz0s turning tool with insert - like new. L/W/H: 250x40x100 mm more
3
Single base with chain for Müller Martini Primera 379 Bbrvebrsdm Compatible with: Primera 379 more
6
Bending machines / press / sheet bending machine/Schwenkbigemaschine Dphl3in ZGR-3140mm / 0.8 mm without roll shears sheet-bending machines is in Scala of degree of, Roman screws, front Schneidebegrenzter, rear rack, gas pressure spring equipped. the working length 3140 mm Steel sheet up to 0.8 mm the total weight of the bending machine is 400 kg wide light between bottom beam (solid) and upper bar (pushing) by 80 mm Bending angle of 145 ° The beam of 24 mm thickness complete machine D... more
5
Tool holder, extension 2gcesba0x Wave recording both sides Ø 71 mm Drawing images Transport dimensions 1650/800/H450 mm Weight 370 kg more
3

Toolholder UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area:ISO 50 mm 9ufxhnvz3 weight:0,15 t appr. 50 ISO 50 arbors, partly with NC ring and cutters for sale single or in package more
3
tool taper 0 shaft cross cut 30.00 tool taper 32x1,5 schrägverzahnt ratio 3jta2oxbp turning speeds U/min li. und re. coolant EK total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1

Tool holders Datron M10

Ratingen, GermanyGermany
6388 km
ready for operation (used)
It is around 33 PCs tool holder with collets and 2 PCs. indexable milling sets for high speed milling machine Datron M10 BJ. 2009/2010. Sale is carried out only in the package. Hinblxkys more
3
Powered tools for Mazak Mazak tool holder Mufmzk 51408030505 Condition: used Art. No .: 1001874 more
5
"Accessories, toolholders and clamps for CNC OERTLI PROFILFRÄSER Cutting width mm: 46 Mx09t Outer diameter mm: 104 Workpiece feed: mechanical Cutters: HMWPL Weight kg: 6" more
5
Electrode holder clamp fitted with air connection for electrode device, electrode welding machine, joints Hobler, electrode clamp -for carbon arc method Peezxw0r Cable length 2.5 m -Dinse plug Air connection -5 x cable available Award pieces Weight 4 kg more
3

Toolholder UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area:ISO 50 mm Epim2agew weight:0,4 t single or package available. - appr. 75 tool arbors ISO 50 with aprtly tooling more
3
tool taper 0 shaft cross cut 30.00 tool taper 32x1,5 schrägverzahnt ratio 1 : 1 turning speeds 4000 U/min li. und re. coolant EK Mqejr total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1

Falling film evaporators HABERSTICH BASE

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
RINA BASE Hhff0o2s0 more
3
tool holder Benz 114FA04945E7L VDI40 fuer Sauter Revolver Bcsnqq0wjg Condition: used Item No .: 1001843 more
6
We remotely add with over 125 PCs tool holder SK50 with mounted tools, Collet holder ea16; ER25; ER32; ER40 (different length) Among others tapping, disk milling cutter, reamer, drill, etc. All tool holders and tools are in a very good condition. Sometimes also new tool holders are iso50. 7yzw7f9cq Price: €18 per piece. Visit required. The photos vary a little. After request, you will receive even more photos. Pick up in 8604 Volketswil-Switzerland more
5
Electrode holder clamp fitted with air connection for electrode device, electrode welding machine, joints Hobler, electrode clamp Splbpgq -for carbon arc method Cable length 2.5 m -Dinse plug Air connection -2 x cable available Award pieces Weight 4 kg more
4

Toolholder Unbekannt

Mönchengladbach, GermanyGermany dealership location
6371 km
2014
used
tool clamping area: mm Bakbnnphzv weight:0,04 t workpiece diameter: mm Tool taper:CAPTO tool taper:ISO 40 100 ISO 40 NC tool holders with appr. 50 x C5 Capto, 5 x C6, 7 x C4. 10 x shaft bore and 15 expansion chucks For sale as package or individual more
3
tool taper 0 shaft cross cut 30.00 tool taper 32x1,5 schrägverzahnt ratio Bapkjlofm turning speeds U/min li. und re. coolant EK total power requirement kW weight of the machine ca. t dimensions of the machine ca. m This is an angled drilling and milling head for a Traub TNS 40/42. price new: 2000 euros more
3

Sassex knife and holder Sassex

Borken-Burlo, GermanyGermany dealership location
6360 km
used
great post drill knife, Sassex - / Sussex knife to d 125 mm P780b7xq and holder Morse MK 5, quick-change holder in stock. Different sizes, required diameter on request please specify more
3
tool holder VDI 20 F3ymjfb SAUTER W62510.1000 Condition: used Art. No .: 1000811 more
5
Multi fix steel holder Bcp202s0pe Type D1 50180 more
3
Electrode holder clamp fitted with air connection for electrode device, electrode welding machine, joints Hobler, electrode clamp -for carbon arc method Length 2-3 m 2wietxvu2 -Dinse plug multiple cable available Award pieces more
1

spare part Horizon holder for stitching heads

Germering b. München, GermanyGermany dealership location
6837 km
used
2x holder for stitching heads Vqxhxq more
3
tool taper 0 shaft cross cut 30.00 tool taper 32x1,5 schrägverzahnt ratio turning speeds U/min li. und re. coolant EK total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Ovfzumw more
3

Toolholder UNBEKANNT ISO 50

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area:ISO 50 mm weight:0,2 t I9ddd2l - palette with 57 SK 50 NC arbors, system KAISER (DIN 69871 AD) with drawings knobs and coolant through center, partly with knife heads and other cutters. more
3
driven tool holder VDI 30 TRAUB 684854 Fwzuyun for TRAUB TNS 30/42 Condition used Art. No.: 1000775 more


base holder
daily

New machines via email!

Stay updated!

to

to

Edit search
BASE HOLDER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close