Used Base for sale (6,520)

Condition: good (used), Year of construction: 2011, Column jib crane, overhead crane, workstation crane -Large base plate: 2000 x 1140 mm -Load capacity: 1000 kg -with chain hoist: Demag type DCS-PRO 10-1000 1/1 H5 VS6-11 year of manufacture 2011 -Main stroke: 6 m/min -Drive system: Demag type E22, year of manufacture 2011 -Travel speed: 24.0/6.0 m/min -Projection: 3860 mm Dujdpfxsxzt Nfj Affsr -Total height: 4470 mm -Height of lower edge of boom: 4060 mm -Hook height: 3510 mm -Swivel range: 270° -Transport dimensions: 4470/2000/H1450 mm -Empty weight: 1004 kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition Dedjyzw I Ijpfx Affour The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 700 mm, total width: 600 mm, total height: 1,220 mm, DGUV certified until: 05/2027, Loading oven Eloma Backmaster EB 30 T double station TOP convection oven tabletop unit for 3 baking trays with exhaust hood on top Stainless steel construction Only from us DGUV V3 inspected 2 x 230V connection Dimensions: 600 x 700 x 1220 mm (W x D x H) Used unit Dodpfsxxgmrsx Affsur with warranty & spare parts service Quality from a professional workshop and service partner! Benefit from over 35 years of experience! Options: Baking trays Water filter Base frame Maintenance contract Delivery service Spare parts box for increased safety Service package Instruction & commissioning Many more ovens available in stock!

Condition: like new (used), Year of construction: 2018, operating hours: 1,294 h, functionality: fully functional, Röders RXP 601 DSH – 5-Axis High-Precision Milling and Grinding Center Machine hours: 1294 (5. March 2026) General Machine Data Manufacturer: Röders TEC GmbH (Germany) Machine Type: 5-Axis CNC Milling and Grinding Center Model: RXP 601 DSH Design: Vertical High-Speed ??Machine Axis System: X / Y / Z + A / C Drive System: Direct drives in all linear and rotary axes Measuring Systems: Optical direct measuring systems in all axes Thermal Management: Active temperature stabilization of all main components Workspace & Mechanics X-axis travel: 540 mm Y-axis travel: 635 mm Z-axis travel: 400 mm A-axis swivel range: ±115° C-axis continuous rotation (360°) Max. workpiece weight: up to 200 kg Machine weight: approx. 10,200 kg Space requirement (L×W×H): approx. 2,950 × 2,950 × 3,100 mm Spindle system Dsdpfx Afoyziacsfsur Spindle manufacturer: Levicron Spindle type: High-precision air-bearing milling and grinding spindle Bearing: Air bearing, operating pressure up to 10 bar Tool holder: HSK 25 (HSK-E depending on the version) Application: High-speed milling and precision grinding Thermal properties: Virtually frictionless, minimal heat input Grinding equipment: • Integrated grinding function in the CNC control • Optimized axis control for grinding processes • Vacuum Z-axis compensation to relieve stress on the Z-axis • Thermally stabilized Z-axis for maximum dimensional accuracy • Suitable for coordinate, profile, and fine grinding Peripheral systems: Extraction: Industrial extraction system for milling and grinding operations Oil treatment: Filter and treatment system for Grinding oil Cooling lubricant Temperature control Chip disposal Oil-based grinding medium Active media temperature control Integrated screw conveyors All information provided to the best of our knowledge, subject to technical modifications.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of slots in tool magazine: 80, number of axes: 4, This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details. • B-axis: 360° (indexing/rundtisch) • Tool magazine: 80 slots • Pallet quantity: 6 total (2 in use, 4 standby) • Operating hours: approx. 2,700–3,000 hours per year (counter reported defective) • Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006) • Coolant volume: 1,500 liters • Voltage: 400 V • Frequency: 50 Hz Dsdpfx Asyzzr Dsffour • Full load current: 100 A • Connection load: 65 kVA • Status: Fully functional, under power, currently in production Technical Specification Taper Size HSK 63

Condition: good (used), Approx. 50 open front storage bins / stacking and transport containers SSI Schäfer, type: 14/7-0a, 710/500x820x610mm – used -: Price per unit ex location: €59 (net)! Price for complete purchase: only €49 (net) per unit! Manufacturer: SSI Schäfer Type: 14/7-0a Year of manufacture: unknown Colour: painted Material: metal Weight (kg): 35 Nominal dimensions (mm) LxWxH: 700x800x600 External dimensions (mm) LxWxH: 710/500x820x610 Load capacity (kg): 800 kg Stack load (kg): 2400 kg Wall thickness (mm): 1.25 Dedpfsyzd Iusx Affour Base thickness (mm): 2 Condition: good Available: immediately Location: Mettmann

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,000 bottles per hour Labelling technology: Self-adhesive Labelling station: 1 × self-adhesive labelling unit (HERMA) Label speed: approx. 40 m/min Roll diameter: 300 mm Label height: up to 240 mm Bottle Formats Bottle types: Swing-top (bail closure) bottles, other bottles also possible 500 ml – Ø 66 × 280 mm 1,000 ml – Ø 85 × 316 mm Label Data Label dimensions: approx. 160 × 17 mm Application type: U-seal label Electrical Data Control system: Siemens S7-1200 Operator panel: Sütron 7” Power supply: 400 / 230 V Frequency: 50 Hz Equipment / Features Alignment system for swing-top closures  Bottle orientation system in infeed star Conveyor height: approx. 1,000 mm Electrical cabinet lighting Socket integrated in control cabinet. Dujdoyzc H Nopfx Affjr

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data Construction: Stainless steel frame for hygienic industrial use HMI: Integrated touchscreen for operation, calibration, and product changeover Electrical Data Power supply: AC 230 V, single phase Current: 11.0 A Frequency: 50 / 60 Hz Inspection Function Detection of foreign bodies: Metal Glass Stones High-density plastics Additional capabilities: Product integrity verification Detection of missing components Density-based inspection Dujdeyzc D Uepfx Affer

Condition: used, Used Niro model Mobile Minor Size 0.8 stainless steel spray dryer. Evaporation capacity approximately 1 to 7 kg/h (depending on the product). Unit measures approximately 800 mm diameter x 700 mm straight side and 700 mm conical base. Unit is fitted with a top cover with pneumatically operated raise and lower. Unit includes top-entry spray nozzle, cyclone, collection pot, GEA cartridge filter, electric heater, peristaltic pump and fan. Also includes HMI control panel and a main electrical control panel. Duodpfx Afoyw S Unofsr

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit , DSQC 617 D6_2E2C2B,20% discount at order more then 1 unit. Duodpoyl Av Dofx Affor DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Dodpfxeyl Avws Affour DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB IRB2600+Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS Duodpfxeyl Avqs Affjr GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB DSQC679 IRC5 Teachpendant,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS Dujdpfxsyl Avks Affsr GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), 3HAC085598-001 SxTPU4 (für IRC5) DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Dsdeyhxqmopfx Affjur

Year of construction: 1965, condition: used, Drilling diameter 30 mm total power requirement 0,74 kW Machine weight approx. 0.35 t drilling capacity in steel (diameter) 30 mm throat 300 mm drilling stroke 120 mm mounting MK 3 table surface 335 x 280 mm Dujdsm Sg Tbepfx Affor groove width 14 mm table adjustable in height 510 mm distance spindle/table max. 120 - 630 mm column base area 380 x 400 mm distance spindle / base plate 1160 mm Speed range - drilling 200 - 2500 rpm speed steps working spindle 4 column diameter 100 mm machined base plate: Yes table rotation approx. 180 ° space requirement approx. 0,9 x 0,4 x 1,9 m Control conventional

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Duodpfx Aeq S Uwbjffer Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame Dodpfoyl Ilwex Affeur HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: like new (used), Year of construction: 2020, Metallkraft Sickenbiegemaschine SBM 140-12 E Motor-driven bead forming machine with machine base, control console, and stop plate for producing various bead profiles and depths. Roller length: 140 mm Bending capacity steel 400 N/mm²: max. 1.2 mm* Dujdsxqp R Repfx Affer Rollers: Ø 62 mm Throat depth: 100 mm Roller speed: 8 m/min Motor power: 0.75 kW | 400 V - 50 Hz Protection class: IP 55 Dimensions (LxWxH): 900 x 1350 x 450 mm Weight (net): approx. 110 kg Includes standard rollers S1-S8 and tool key Demonstration machine, used once

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Duedpex Hgkvofx Affer Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Duedpfx Afex U Ectofer Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Year of construction: 2014, condition: good (used), Avatec trough vibrator TV 60, 60 liters nominal capacity with base frame, process time control, manual separating device, circulation cascade 50 liters, made of stainless steel. New price of the machine: €12,000.00. Dsdeyzak Eopfx Affjur

Condition: good (used), Year of construction: 1984, Thomann EED 20 Automatic Bar Lathe For square and flat bars Capacity range: 6-20 mm Flat steel: 10/3-30/10 mm Turning length: 25-900 mm Technical specifications Length: 1200 mm Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotation speed: 7 rpm Dusdswbgliepfx Affor

Condition: good (used), Year of construction: 2000, Measuring and granite plate, manuf. Oelze, 1000x1500 x 220 mm, with base frame Djdpoxxzp Uefx Affour

Year of construction: 1999, condition: good (used), Chamber hardening furnace K 1150-2 Rated temperature: 1150 °C, 5.0 kW 400 Volt Usable space: 225 mm width, 215 mm height, 300 mm depth External dimensions: 525 x 595 x 650 mm Heating-up time: 2.5 h 75 kg With base frame Duedpsxwqhkefx Affsr

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 760 mm, total width: 4,660 mm, spindle speed (max.): 8,000 rpm, total height: 4,100 mm, overall weight: 29,000 kg, tool weight: 20,000 g, spindle motor power: 26,000 W, controller manufacturer: FANUC, controller model: 31iM-F CNC with 10.4" LCD, product length (max.): 8,700 mm, number of axes: 4, This 4-axis AWEA LP3016YF gantry milling machine was manufactured in 2021. It features a substantial working area of 3216 x 1500 mm and a maximum workpiece weight of 10,000 kg. The machine is equipped with a FANUC 31iM-F CNC control and includes a 32-position tool changer. If you are looking to get high-quality milling capabilities, consider the AWEA LP3016YF machine we have for sale. Contact us for further details. • Worktable: 3216 x 1,500 mm • Max. workpiece weight: 10,000 kg Duedpfxoyzr Sbe Affor • Distance plane to spindle nose: 200–960 mm • Distance between columns: 2,300 mm • Spindle taper: MAS BBT50 • Rapid traverse (X/Y/Z): 20 m/min (15 m/min) • Feed (X/Y/Z): 1–10,000 mm/min • Tool changer: Arm type, 32 positions • Max. tool diameter: Ø127 mm • Max. tool diameter with free adjacent pockets: Ø215 mm • Max. tool length: 400 mm Additional equipment • Full machine encapsulation with roof (CE compliant) • Cooling and thermal management: • 20 bar high-pressure coolant system with filters • Low-pressure pumps (Grundfos/Walrus) • Spindle oil cooling system / oil cooler • Cooling system, spindle exhaust, heat exchanger in electrical cabinet • Chip handling: • Double screw-type chip conveyor along the table • Chain-type chip conveyor in Y-direction, located at one end • Probing: • Renishaw 3D workpiece probe system • Renishaw TS 27R tool-setting probe • Lighting: Double LED machine lighting plus LED spot • Tooling package: 20 pcs BBT50 tool holders incl. 32 pcs tightening bolts (through-coolant) • Power: 3x400V 50Hz CE transformer • Base/accessories: Steel machine shoe • F option (angle head and automation): • 90° angle head with automatic 5° indexed C-axis • Automatic change of vertical head; head stored in a box at the machine portal • Swing-away angle head storage • ATC change in both horizontal and vertical positions • Max. angle head rpm: 3,000 rpm • Transverse travel upgrade: Y = 1,900 mm (with F option)