Used Baumer Hhs for sale (189)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Hjdpfsrnkwrjx Aftefr Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Year of construction: 2002, condition: ready for operation (used), Tünkers UAM-1050, year of manufacture 2002 A shape gluing machine with manual feed. In the original version, the material was glued using a custom-cut rubber blanket (foam rubber) via a cylinder system. For safety reasons, the machine was retrofitted at the beginning of 2024 with an HHS gluing system featuring four nozzles plus a spare nozzle (see photos). The machine was used for gluing the back panels of four-month calendars. Hfodow Rr Dzepfx Aftjr The HHS unit was installed at the beginning of 2024 and was in operation for only 6 months.

Condition: used, functionality: fully functional, machine/vehicle number: 6323138, Year of construction: 2014, operating hours: 2,407 h, load capacity: 1,600 kg, lifting height: 4,400 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6323138 Mast type: Triplex Condition: Ready for use and fully functional Hfodpfx Aeuhwukjftor Technical condition: good Battery Volt: 24V Battery Ah: 265Ah Battery year of construction: 2014 Description: BT SPE 160 L No.: M0408 Year of construction: 2014 Operating hours: 2,407 The device is visually and technically in good condition. Identical machine built in 2012 available with BH 2010mm, HH 4150mm, GL 1150mm and operating hours 1508. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the appliance! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. Any sale of used goods is subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Hfedpfsh Ir E Eex Aftjr Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, With a wide range of accessories Including silicone tape dispenser from Dünki Including HHS 6-channel gluing system 4+6 point gluing (cyclic storage) Hedpfx Afowi Nhvstjfr Accessories for automatic flooring

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. Hodpfx Aoh Ra Spoftsfr diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.

Condition: excellent (used), Year of construction: 2016, The optional inspection systems are offered as special features of the KAMA FF 52i: 1. Glued seam inspection 2. Inspection of the gluing flap code such as colour code, QR code, etc. 3. 100% inspection for dirt and defects in text, colour, hot foil, and even cold embossing, as well as creases. The inspection systems are controlled by Baumer hhs; they are, of course, GMP-compliant, and non-conforming boxes are reliably ejected by the FF 52i. If desired, these features can also be implemented using other manufacturers’ systems. Inspection and removal processes are logged automatically. Examples of changeover times from a customer with very short production runs. Addressing Print 4.0 Like all KAMA machines, the FF 52i can be integrated into the customer’s IT network via a data terminal and/or connected to the internet to communicate with internal production departments, MIS software, and the KAMA service department for remote maintenance. All jobs can be saved either on a central server or locally on the machine. The machine is also prepared to receive and send data, such as electronic job tickets, track & trace information, etc., using the JDF Standard. The machine can be adapted to the following applications: - Straight-line boxes - Lock-bottom boxes - Pillow boxes - Automatic boxes (crash-lock) - Slip-lid boxes Modules of the basic machine: - Friction feeder with two main setting guides - Belt feeder with six suction belts - Alignment unit for left or right alignment - Pre-breaking unit for creasing lines R1 and R3 (gluing flap 180°; right 135°) - KAMA gluing disc unit with exchangeable glue disc - KAMA final fold section, fully automated with patented APA system (Automated Plough Adjustment), and ejector - Transfer station with kicker for counting products - Pressing section with three pressure zones - Delivery belt - Operation and control: - Touchscreen operation with pictograms and multiple languages - Movable operating panel for convenient operation and inching mode - Data management for repeat orders For remote maintenance, the machine requires a network cable and configuration of the unique and permanent static IP address, subnet mask, DNS-server IP addresses (primary and secondary), and standard gateway IP address. Technical data: - Dimensions (L x W x H): approx. 13 x 1.2 x 1.5 m Hfsdsw H N Eiepfx Aftsr - Production speed: 20–250 m/min (straight-line box), 20–100 m/min (automatic bottom box) - Max. blank width: 520 mm - Processable material: - Cardboard: 180–600 gsm - Folded box thickness: max. 5 mm - Corrugated microflute E, F, N: 0.4–1.8 mm - Dimensions of straight-line and automatic boxes

Condition: ready for operation (used), Year of construction: 2006, MBO folding machine T800.16, built in 2006 Round pile feeder R800 1st station T800.1 with 6 pockets Preparation for glue Segmented rollers Transfer table 2nd station T68-4 with 4 pockets Cutter shaft cassette Transfer table 3rd station T56-4 with 4 pockets Cutter shaft cassette RFE turning unit Hfodevyaqkopfx After Horizontal delivery FA 66 ME Optional: HHS cold glue device X-Trend, built in 2006 4 channels 1 glue head

Condition: used, functionality: fully functional, machine/vehicle number: 6475718, Year of construction: 2016, operating hours: 1,933 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,890 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6475718 Mast type: Triplex Hfjdpfeuhwp Iex Aftjr Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 500Ah Description: BT SWE160L No.: R0223 Year of construction: 2016 Read operating hours: 1933 The device is visually and technically in very good condition. Charger on request. Identical device with the same year of manufacture and the same BH, HH, FH and GL available. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the appliance! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All sales of used goods are subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Initial lift,

Condition: ready for operation (used), 03. gang saw Pini and Kay VU 65 HH e with splitting wedge with drive motor 45 kW with countershaft Hfjdeh Ict Ejpfx Aftor with saw blades with saw clamp with hook with templates with blower Location: Austria, near Steyr

Condition: used, functionality: fully functional, machine/vehicle number: 6485436, Year of construction: 2017, operating hours: 1,530 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,340 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6485436 Mast type: Triplex Condition: Ready for use and fully functional Hsdpfxouhwnko Aftsfr Technical condition: very good Battery Volt: 24V Battery Ah: 500Ah Battery year of construction: 2017 Description: BT SWE 160 No.: R0335 Year of construction: 2017 Operating hours: 1,530 The device is visually and technically in very good condition. Charger on request. We have two identical devices with the same year of construction and the same BH, HH, FH and GL immediately available. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the appliance! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All sales of used goods are subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site.

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Hedpfowptuyjx Aftofr Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Condition: used, functionality: fully functional, machine/vehicle number: 6528825, Year of construction: 2017, operating hours: 5,996 h, load capacity: 1,450 kg, lifting height: 3,300 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, construction height: 2,200 mm, fork length: 1,150 mm, empty load weight: 1,375 kg, drive type: Elektro, High lift truck Chassis number: 6528825 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Polyurethane Rear tires type: Polyurethane Battery Volt: 25V Battery Ah: 196Ah Hodpfxouhwpze Aftofr Battery manufacturer: Lithium-ion Battery year of construction: 2017 Description: BT SWE 145L No.: K0533 Year of manufacture: 2017 Operating hours: 5,996 Charger on request. The device is visually and technically in good condition. Identical device with the same year of construction, same BH, HH and GL available. Subject to errors and prior sale. If you have not found the truck you are looking for, please contact us. We have a large selection of other trucks on site. Initial lift, - valid UVV

Condition: used, functionality: fully functional, machine/vehicle number: 6451297, Year of construction: 2016, operating hours: 384 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: simplex, construction height: 1,851 mm, fork length: 1,150 mm, drive type: Elektro, High lift truck Chassis number: 6451297 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 225Ah Battery year of construction: 2016 Description: BT SWE100 No.: M0403 Year of manufacture: 2016 Read operating hours: 384 The device is visually and technically in very good condition. Charger on request. Identical device with the same BH, HH and GL available. Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Subject to errors and prior sale, sale only to tradespeople. All sales of used goods are subject to the exclusion of warranty or guarantee. If you have not found the forklift you are looking for, please contact us. We have a large selection of other equipment on site. Reach-through protection Makrolon load rollers Single charger external Hfjdpfouhwtysx Aftsr