Used Baykal Aphs for sale (49)

Condition: excellent (used), Year of construction: 2004, Pressing force: 220 t, Throat depth: 370 mm, Hydraulic press brake Fab. BAYKAL Typ. APHS 4100 x 220t Year 2004 Technical data Make: Baykal Type: APHS 4100 x 220 Year of construction: 2004 Pressing force: 220 t max. bending length: 4100 mm stroke: 260 mm throat: 370 mm Uk83Jaf0R7 Bending capacity: 9 mm St. 42 Feed speed: 90 mm/s Bending speed: 7.6 mm/s Return stroke speed: 60 mm/s Backgauge range: 750 mm Connected load: 22 kW Dimensions: L 4.65 x W 2.0 (plus support arms 0.4 m) x H 2.8 m Weight: 16 t Equipment - DELEM model DM 51 control unit - 2 front support arms - mechanical tool clamping Amada - CNC controlled crowning - Backgauge X-axis 700 mm and R-axis 150 mm, CNC controlled adjustable - 4 stop fingers manually adjustable - Foot pedal - Grid protection at the side and rear - SICK C 4000 light barrier - Cranked upper tool, 60°/R 0.8, H 160 mm, L = 3,250 mm, segmented - Straight upper die, R 12.5, H 100mm, L = 4,300 mm, segmented - Block die with V8, V12, L = 3,500 mm - Die V25/60°, H 120mm, L = 3,760 mm, segmented All data without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2022, Operating hours: 15 h, Pressure 240 t folding length 4100 mm upright width 3550 mm projection of the uprights 410 mm DELEM DA 66T control unit Table width 90 mm Table height above floor 880 mm Installation height 530 mm Piston stroke 260 mm Lowering speed 150 mm/s Pressing speed 10 mm/sec Retraction speed 100 mm/sec Max. utilization range backgauge (X axis) 750 (1000) mm max. utilization range back gauge (R axis): 160 mm Machine weight approx. 14000 kg Dimensions 4900 x 1550 x 2600 mm Buokqgo2

Condition: used, Year of construction: 2013, pressure 300 t chamfer lenght 3100 mm distance between columns 2550 mm column arm 500 mm ram stroke speed 110 mm/sec return speed 100 mm/sec work speed 8,0 mm/sec work stroke 420 mm dayligth 870 mm table height 905 mm oil volume 280 ltr. voltage 400 Volt working pressure 283 bar Number of working hours ~ 21.835 h total power requirement 23,0 kW weight 18.250 kg Dimensions (HxWxD) 4550 x 2250 x 3300 mm current new price ~ 135.000 euros - in checked condition - machine video - youtube.com/watch?v=lT0APHnn9Js ----- Press brake with special equipment * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - DELEM CNC control model DA 66T (touch screen) * 2D graphic touch screen programming mode * 17" high-resolution color TFT * Complete Windows application suite * Delem Modusys compatibility (module scalability and adaptivity) * USB, peripheral connection * swiveling control unit, front left - motorized back stop with R axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - CNC controlled axes: Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1 - 2x CNC electrically movable stop fingers - electrical crowning, controlled via CNC - Safety device behind the machine - FIESSLER AKAS laser protective device in front of the machine - 2x front support arms "Sliding system", with T-slot and tilting cam - 1x freely movable double foot control - CE mark / declaration of conformity Dpqyyx - Control cabinet, left side - Operating instructions Special accessories included: - WILA hydraulic tool clamping at the top - WILA hydraulic tool clamping at the bottom - 1x CNC controlled bending aid (AP1) - "Parking" area for bending aid

Year of construction: 2019, Operating hours: 482 h, Condition: ready for operation (used), General Data Measurements width 1875 mm Measurements depth 4875 mm Measurements height 3020 mm Machine weight 16000 kg Control Unit Dps0Bz Brand DELEM Model DA-66T Main Drive Number of axis 4 Tools Max weight 150 kg This 4-axis Baykal APHS 41240 was manufactured in 2019. A robust Hydraulic Press Brake with a bending length of 4100 mm and a capacity of 240 tons. Features DELEM DA-66T control for precision operations and includes 2 sets of tooling. Ideal for heavy-duty tasks, the Baykal APHS 41240 machine we have for sale is like new with only 482 powerON hours. Contact us for further details regarding this bending machine. Application Types Bending

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Total height: 3,100 mm, Pressing force: 300 t, Total width: 2,100 mm, Total length: 3,550 mm, For sale is a Baykal unloading press with a compressive force of 300 tons over a length of 3350 mm The press brake is in a very good maintained condition and works perfectly! Delem control DA66 Dprg9X Price is exclusive of tooling: Optionally available Bottom tool: Split cube 16/22/35/50 Single tools V8 / V12 / V80 / V100 Upper tool: Pointed straight 28 - 100 to/m Universal cupped - 100 to/m Cupped - P85 Price net VB: 34.000€ Please contact us for further information

Condition: good (used), Year of construction: 2018, Immerse yourself in the capabilities of this 2018 Baykal APHS 31160 press brake, currently stationed in Belgium. Crafted with precision, this machine is outfitted with an advanced Delem DA69T control unit, ensuring optimal and reliable performance. Boasting a generous bending length of 3100 mm and an impressive 160-ton pressing force, it caters to diverse metal fabrication tasks with ease. The nominal power of 19 kW further contributes to its efficiency, establishing it as a trustworthy choice for precision bending. Elevate your metalworking efficiency and achieve exceptional results in your projects by investing in the Baykal APHS 31160. Technical specifications: Made in: Turkey Control unit: Delem DA69T Pressing force: 160 Ton Bending length: 3100 mm Stroke: 260 mm Thickness: 6 mm Nominal power: 19 kW Number of axis: 7 Working speed: 10 mm/s Bed height: 880 mm Daylight opening: 540 mm Throat gap: 410 mm Bksv7Ooo9Xa Dimensions Length: 3550 mm Width: 1600 mm Height: 2800 mm ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Year of construction: 2006, Condition: like new (used), Rushworth Baykal APHS 3106×120 3metre x 120ton hydraulic down stroke cnc pressbrake for sale Very clean downstroke Baykal 4axis cnc pressbrake for sale – complete with a large amount of tooling Year 2006 Model Aphs 3106 x 120 Euro tooling Total 4axis Y1,Y2,X and R axis Wila crowning system 4 fingers on the backstop, ideal for extra support when folding your full 3metre length and intricate small parts Large selection of tooling 49cm daylight Euro tool clamps Quick release clamps Modern Delem DA-56 cnc control with usb Hydraulic down stroking pressbrake Delivery, installation and training available Cff7Nbzkbx

Condition: new, Year of construction: 2023, CNC control part 4 controlled axes: Y1, Y2, X, R CNC crowning laser security Side and rear security racks. Front supports move linearly Shared upper blade. Shared bottom bar. Bk8Jy8Xks90

Condition: good (used), Technical data: Working length: 6100 mm column width: 4400 mm pressing force: 300 to B70Jiludzg CNC control: DELEM DA51 controlled axes: Y1, Y2, X mot. adjustable backgauge throat: 350 mm installation height: 585 mm working height: 1115 mm table width: 280 mm number of supporting arms: 4 Motor power: 30 kW CE mark dimensions (length x width x height): approx. 6600 x 2100 x 3450 mm Weight: approx. 27 tons the machine is transported in one piece in case of order The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Year of construction: 2022, Condition: as good as new (ex-display), Functionality: fully functional, TECHNICAL DETAILS Maximum pressing capacity: 160 t folding length: 3.100 mm Bending length between the uprights: 2.550 mm projection in the stand: 410 mm Table width: 60 mm Table height from floor: 870 mm Installation height: 530 mm Max. Piston stroke: 260 mm Lowering speed: 200 mm/s Pressing speed: 10 mm/s retraction speed: 160 mm/s max. use range backgauge (X axis): 1000 mm max. use range backgauge (R axis): 160 mm backgauge adjustment speed in X axis, servo motor: 330 mm/s positioning accuracy of the backgauge: +/- 0.03 mm CONTROL CNC control: VisiTouch 19 - 2D This allows easy graphical programming of products. After one keystroke the control calculates the bending sequence and all axis positions (including collision warning). Ci7F89Q9H9 - 19" TFT color display touch screen - USB interface - network connection - Tool directory for 100 punches and dies each - Graphical 2D programming - 2D display while working - maximum 26 axes + auxiliary functions - PC programming software "OFFLINE - Remote service (teleservice) via Teamviewer MACHINE DETAILS weight: 10.000 kg dimensions L x W x H: 4.100 x 1.800 x 2.700 mm engine power: 15,0 kW oil tank capacity: 180 l EQUIPMENT - Manual quick clamping device for the upper tools type Promecam / AMADA with screw toggle, safety lug and plastic pressure bar for tight clamping of narrow tools (max. load tools (max. load 100 t/m) - Upper tool split, system "Amada", manufacturer Italy, material C 50 (HRC 50-52) induction hardened and ground on the working surfaces(max. load 100 t/m) Standard delivery: pitch: 3 x 835 mm, horn left and right each 100 mm, rest in smaller pitch, height 66,6 mm - Bottom tool / 4-fold prism cube CroMo 4, ground 60x60 mm, V-openings standard: 16 - 22 - 35 - 50 mm - 2-axis backgauge system with recirculating ball screws and servo motors, controlled by CNC, max. utilization range 1000 mm for X-axis, for R-axis 160 mm positioning accuracy +/- 0.03 mm, travel speed: 330 mm/s - 2 laterally adjustable stop fingers. - Laser protection "FIESSLER" with 2-fold beam, type AKAS / LCII, Operation of the press only possible with foot pedal. Manually adjustable with linear guides both in vertical and horizontal axis (easy and quick adjustment after tool change) - automatic motorized table crowning system WILA, integrated in the CNC - front sheet supports (2 pieces) laterally movable via linear guide height adjustment with handwheel - central lubrication with hand pump - deflection compensation via CNC - oil filling - German operating instructions with spare parts list - Hydraulic block, valves make HAWE / HOERBIGER - Hydraulic pump: Tandem pump HAWE - Relays and contacts: Schrak, Pilz, Siemens, Eaton or Telemecanique - CE conformity

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, Machine/vehicle number: 8627, Baykal folding machine in good condition! Please arrange a viewing appointment! Nzzxl2Clgx

Condition: new, Year of construction: 2024, Functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Dnzqdh The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Year of construction: 2008, Condition: used, Baykal aphs 4100x600 Bending length 4100m Tons 600 Axis Y1,Y2,X,R,Z1,Z2 Delem 66w disassembled Pira9Bfh

Condition: used, Year of construction: 2007, pressure 120 t chamfer lenght 3106 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 200 ltr. Number of working hours 46.200 h total power requirement 7.5 kW weight of the machine ca. 9000 kg. range L-W-H 4250 x 1800 x 2450 mm well-maintained condition (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - youtube.com/watch?v=PCBM1tCsQdA Gpami0 Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model "DA 56VA" (SN 27252) * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * with 4x manually adjustable stop fingers - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized table crowning - ROLLERI upper tool adapter (quick-change clamping) * including crowning device in the tool holder * TYPE: ROLLERI "INT 150" .. H = 150 + 30 mm * UKB split deer foot upper tool .. TYPE "11.670" - AMADA lower tool holder, including clamping device .. W = 60.0 mm - 2x front, movable support arms ("sliding" system) - side protective device (swinging doors) - rear protective device (sliding door) - 1x freely movable 2-hand/foot control - original operating instructions including CE declaration

Year of construction: 2022, Condition: new, Baykal APHS Hybrid 3100x200 tn IN STOCK Approximately 60% less energy use when idle Approximately 45% less energy use during bending Approximately 30% faster cycle time Delem 66T Control mounted on height adjustable pendant arm Fully synchronised CNC control of left and right upper beam cylinder position – Y1 + Y2 axis CNC control of back gauge depth – X axis CNC control of back gauge height – R axis Manual side to side movement of back gauge fingers – Z axis Amada Promecan style top tool holders CNC bottom tool crowning system 87U3Mx Akas laser tooling guards for enhanced ease of use

Condition: used, Year of construction: 2006, pressure 90.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 860 mm oil volume 130 ltr. total power requirement 7.5 kW weight of the machine ca. 6250 kg. range L-W-H 3150 x 1750 x 2605 mm good condition (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - youtube.com/watch?v=U4NqHGRbWmU Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left Dppwmd - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back stop, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - upper tool holder system A (Amada), with upper wedge crowning - lower tool holder system A (Amada) - LAZER Safe front laser protection device - 2x front, movable support arms (“Sliding” system) - side protective grilles - freely movable foot control - operating instructions Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85° * Machine link: mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008- 93082

Condition: used, Year of construction: 2008, pressure 90.0 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec back stop - adjustable max. 750 mm stroke 260 mm dayligth 460 mm table height 880 mm oil volume 200 ltr. total power requirement 7.5 kW weight of the machine ca. 7500 kg. range L-W-H 4250 x 1800 x 2450 mm good condition - with 1x set of new bending tools (!!) current new price approx. 80.000 euros special price on request - in checked condition - machine video - youtube.com/watch?v=Xlb8EgQ8088 Equipment: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * graphic 2D programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - swiveling operation, front left - CNC controlled axes: Y1 + Y2 + X + R - CNC electro-motorized back stop (X axis) * with 4x manually adjustable stop fingers - CNC electro-motorized height adjustment of the back stop (R axis) - manually adjustable table crowning * including analogue value display * including hand crank for adjustment - AMADA upper tool Quick-change clamping * including crowning device in the tool holder - AMADA die adapter rail, bottom - 2x front, movable support arms ("sliding" system) - side protective device (swinging doors) - rear protective device (sliding door) - 1x freely movable 2-hand/foot control - Operating instructions (PDF) Special accessories included: - 1x NEW split set of upper tools (4x 835 mm) * Angle 85° / Radius R 0.8 mm / Height 66.5 mm - 1x NEW split set of lower tools (4x 835 mm) Dpiblz * V openings: 16/22/35/50 mm * Height 60.0 mm / Angle 85° / Material=C45

Condition: used, Year of construction: 2008, sheet width 3060 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm back stop - adjustable 5.0 - 1000 mm work height max. ca. 820 mm cutting angle 2.4 ° stroke 7 - 12 p/min. down holder 14 Stück operating pressure 360 bar Control MAPER HT071 Number of working hours ca. 800 h voltage 400 V oil volume 250 ltr total power requirement 30.0 kW Hu3Ptu8 weight 11900 kg range L-W-H 4000 x 2250 x 2200 mm in a well-maintained condition from a maintenance workshop with only approx. 800 operating hours (!!) Equipment: - robust / electro-hydraulic swing beam shears - with MAPER HT071 digital control - NC electro-motorized back stop 5.0 - 1,000 mm * backlash-free ball screw for back stop * back stop bar can be automatically tilted up to max. position * speed 100 mm/sec - NC electro-motorized cutting gap adjustment - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - Machine side stand with projection - front support plates with ball rollers - front finger protection - Tip operation with push buttons on the control panel - 1x robust side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Operating instructions (PDF)

Year of construction: 2023, Condition: new, CNC control ESA 875 2d – 6 axes Y1 – Y2 – X – R – Z1 – Z2 Maximum pressure Ton. 50 Useful bending length mm 2040 CNC motorized crowning table (CROWING) Safety systems with FIESSLER type laser photocells Vavadyrb N.2 front supports Throat depth mm 410 Daylight opening mm 590 Stroke mm 260 Approach speed mm/sec 150 Working speed mm/sec 10 Return speed mm/sec 150 Motor power 2 x 5.5 kW Table width mm 60 Weight 5.6 t Use and maintenance manuals

Condition: like new (used), Year of construction: 2017, Operating hours: 624 h, Functionality: fully functional, Machine/vehicle number: 12/2017, Total height: 2,200 mm, Total length: 4,000 mm, Overall weight: 12,000 kg, Beautiful and well-maintained machine for sale. Max cutting thickness: Black 12 mm. Stainless steel 8 mm. Dppbch Aluminum 12 mm. Has no faults or defects See attached datasheet for more info

Condition: excellent (used), Year of construction: 2006, Operating hours: 2,500 h, Functionality: fully functional, Back gauge travel distance Z-axis: 1,000 mm, Back gauge: 1,000 mm, Sheet thickness steel (max.): 10 mm, Cutting length (max.): 3,060 mm, Total width: 2,000 mm, Total height: 2,000 mm, Total length: 4,000 mm, Overall weight: 9,500 kg, Hydraulic plate shear, BAYKAL, model MGH 3100x10, new 2006, capacity 3100x10mm (st 42), with NC back gauge, blade angle adjustment, blade gap adjustment, equipped with rear elevating plate holder, rear light guard - Excellent condition. Uk8Cgrjujf

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 1900 Measurements depth 3700 Measurements height 1250 Machine weight 3150 Uaespfmc2P This Baykal RGS 3150x3 was manufactured in 2007. A robust CNC shearing machine with a cutting length of 3150 mm and a maximum backgauge reach of 600 mm. It handles steel up to 3 mm thick and offers up to 38 cuts per minute. Dimensions are 3700 x 1900 x 1250 mm, weighing 3450 kg. A great opportunity to buy this Baykal RGS 3150x3 CNC shearing machine. Contact us for more information. Application Types Shearing

Condition: new, for working length: 1000 mm Total height: 145 mm 0Z0Cmfwpf weight:

Year of construction: 2019, Condition: ready for operation (used), General Data Ystrrrj8 Measurements width 4900 mm Measurements depth 2970 mm Measurements height 2370 mm Machine weight 15400 kg Control Unit Brand SIEMENS Model SIMATIC HMI TOUCH This Baykal HNC 4110 was manufactured in 2019. A robust hydraulic shear with a cutting capacity of 10 mm and a length of 4060 mm. It features a Siemens Simatic HMI touch control, operates at 400 V / 50 Hz / 3 Phase, and has a nominal power of 23.55 kW. Ideal for heavy-duty shearing with a machine weight of 15400 kg. For more information about this shearing machine, please reach out to us. Application Types Shearing

Condition: new, Length: 1000 mm Edge length: 100 x 100 mm Weight: Mld9H