Used Akyapak Asm-S 200-25/6 for sale (14)

Condition: used, total length: 4,550 mm, total width: 1,380 mm, total height: 1,250 mm, Year of manufacture: 2020 Colour: Red Dwodpfxo Aigu Is Aarjd Empty weight: 3.600 kg Price: On request - Year: 2020 - CE marking present: Yes - Serial number: SY190-146 - Drive system: CNC - Control system brand: ESA - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 3.0 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 190 - Bottom roll diameter [mm]: 190 - Options: Cone rolling - Transport dimensions: 4550mm x 1380mm x 1255mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Three-roll – Round bending machine Akyapak ASM 140-20/4 Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display sheet metal width 2050 mm sheet metal thickness 4.5 mm max. sheet metal thickness 4.0 mm for pre-bending roll length 2050 mm smallest diameter 210 mm roll diameter - top 140 mm weight 1530 kg dimensions L-W-H 3220 x 1200 x 900 mm Dodod R Iqxopfx Aarowd Equipment: top and bottom rolls electrically driven top roll can be swiveled out taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable foot switch operating manual in German CE marking / declaration of conformity

Condition: good (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: SY 330 -075, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Akyapak, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, overall weight: 9,100 kg, total length: 4,585 mm, total width: 1,610 mm, total height: 1,840 mm, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, The sale includes a 2-meter longitudinal welding station equipped with an Oerlikon MIG 500 A welding unit, with all equipment in full working order. Dsdpfx Aezzdahoarjwd Also included are a lifting table for material handling to the plate rolling machine and a work platform. The plate rolling machine is in good condition and can be put into production immediately. The machine is currently operational, and inspection and test runs can be arranged upon request. With the inclusion of the longitudinal welding station, this package provides a complete solution for manufacturing tubes and special pipe sections to customer-specified diameters, with lengths of up to 2 meters.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Dwodpfx Aoyr N Erearjd Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Dwedpfxjzibqae Aarsd Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Akyapak APK 81 with control system Control system: AKYAPAK AK-400 Year of manufacture: 2018 Angle iron – legs pointing outwards: 76 × 76 × 9.5 mm, internal diameter 1,600 mm Angle iron – legs pointing inwards: 76 × 76 × 9.5 mm, internal diameter 1,981 mm Flat steel – lying flat: 121 × 28.6 mm, internal diameter 2,083 mm T-profile: 76 × 76 × 7.9 mm, internal diameter 1,397 mm Rectangular steel: 122 mm, internal diameter 2,083 mm Square steel: 44.5 mm, internal diameter 1,016 mm Dwsdpfxe Aiqnuo Aarjd U-profile: 9.5 × 7.9 mm, internal diameter 1,219 mm Motor power: approx. 5.1 kW Roller diameter: 245 mm Shaft diameter: 80 mm Bending speed: approx. 4.0 m/min Operating voltage: 230 / 480 V, 3 phases, 60 Hz Standard roller set included

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller diameter: 90 mm, working width: 1,550 mm, roller height adjustment: 110 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 600 kg, total length: 2,300 mm, total width: 700 mm, total height: 1,150 mm, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, AKYAPAK AS 1550x90 sheet metal bending machine 1550mm x 2.5 mm, 3 rollers /ct2289/ Electric, pedal-operated rolling machine. Strong, robust construction. The upper roller can be rotated to remove the workpiece Convenient to use, suitable for workshops and industry Manufacturer: AKYAPAK AS 1550X90mm Year of manufacture: 2002 Bending Length: 1550 mm Bending capacity: 2.5 mm Roller diameter 90 mm - SAE 1050 certified high tensile steel rollers - Wire grooves at the ends of the rollers (4/6/9) mm - Motorized adjustable rear roller - Mobile control panel with foot pedal - Precision bending with brake motor - Conical bending device - Manual folding end - Cast iron main frames Bending speed 6m / min Motor power 1.1 kW 50Hz 380v Wire groove diameter 4/7/10 mm Machine dimensions 2400x800x1200 mm Weight 600 kg Dodjxmvgkspfx Aarjwd

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm Dwsdpfx Ajztfxijarsd total power requirement 3 kW weight of the machine ca. 2 t

Condition: new, Ring and profile bending machine Akyapak APK 81 Dedpfx Aed R Iqujarjwd I-beam – upright 100 x 20 (d 2100) mm Tube diameter max. 100 x 3 (d 3000) mm Angle iron 80x80x8 (d 2000) mm Square stock 50 x 25 x 2 (d 600) mm I-beam – flat 120 x 30 (d 600) max. 140 mm Solid material – diameter 60.0 (d 1000) mm Tool holder 80.0 mm Rotation speed 4.2 m/min Weight 1,600 kg Dimensions L-W-H 1240 x 1375 x 1540 mm Features: Hydraulic roller drive Planetary gearbox for feeding the 2 lower rollers For extra small bending radii Hardened tool holder (42CrMo4) Standard roller set, hardened Mobile control panel 3 driven rollers Digital display Machine can be used horizontally and vertically CE marking / Declaration of Conformity Operating manual in German

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Dsdpfet U R H Usx Aarjwd Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Price excluding VAT Dodpewmdw Hefx Aarowd

Condition: new, 1 set of brand new steel profile rollers, suitable for an AKYAPAK APK 50 profile bending machine. Dwsdpfez Eaqujx Aarod Suitable for rectangular tubes 60 x 40 x 3 mm, flat. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Akyapak Akbend Ring Profile Bending Machine APK 50 Description • Lower roller adjustment, hydraulic – both lower rollers can be adjusted • Suitable for horizontal and vertical operation • Control panel (the position of the lower rollers is displayed) • Standard rollers included • 3 driven rollers • CE marking / Declaration of Conformity • Operating manual Technical Details • Bending capacity: see performance table • Bending speed: 4.4 m/min Dsdod Er S Ajpfx Aarjwd • Roller diameter: 157 mm • Shafts: 50.0 mm • Total power consumption: 1.1 kW • Weight: 500 kg • Dimensions L-W-H: 950 x 700 x 1220 mm

Condition: new, Akyapak Akbend Ring Profile Bending Machine APK 35 Description • Machine base frame • Horizontal and vertical working position • Foot switch Dwedpfx Ajd Er S Isarjd • Standard rollers (split) • 2 driven rollers • CE marking / Declaration of Conformity • Operating manual in German Technical Details • I-beam - flat: 120 x 15 (d 750) mm • I-beam - upright: 60 x 10 (d 800) mm • Angle iron: 50 x 5 (d 1200) mm • Round material: 35.0 (d 800) mm • Pipe diameter max.: 70 x 2 (d 1200) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m/min • Roller diameter - top: 155 mm • Bore: 50.0 mm • Total power consumption: 1.5 kW • Weight: 320 kg • Dimensions L-W-H: 730 x 830 x 1350 mm