Used Bending Prism for sale (3,409)

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal Gbodpfx Asgh T Hroh Eow - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Gjdpfx Aheh T Ulys Ejbw

Condition: new, Ostas 4-roll round bending machine 4R OHS 2070 x 220 Hydraulic side roller infeed Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Roller length : 2000 mm Top roller diameter : 220 mm Side roller diameter : 180 mm Total motor power : 4+3 KW Weight : 4900 kg Dimensions (mm) : 4050 x 1550 x 1470 (L x W x H) Godpfx Ahjtvn D Te Ejbw Performance data bending: 11 mm with smallest inner diameter (5 x top roll) 9 mm with smallest inner diameter (1.5 x top roller) Bending performance data: 9 mm with smallest inside diameter ( 5 x top roller ) 7 mm for the smallest inside diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 structural steel ) Special accessories installed: Infinitely variable rolling speed: NC control:

Year of construction: 2022, condition: ready for operation (used), General Data Gbsdoxqtd Ujpfx Ah Eow Machine weight 4500 Kg This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Application Types Bending

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1986, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Thalmann, controller model: DS2200, working width: 8,100 mm, Equipment: documentation/manual, emergency stop, foot remote control, Used long folding machine Make: Thalmann Year of manufacture: 1986 / factory reconditioned in 2025 Working width: 8100 mm Sheet thickness: 1.50 mm at 400 N/mm² / 2.00 mm at 200 N/mm² Working depth: 1000 mm (without motorized back gauge) - DS2200 control with 8-step bending program - Longitudinal cutter with capacity equivalent to bending performance - 1 double foot pedal Gbsdpfsxr Dy Nox Ah Eow - 1 hydraulic accumulator - Adjustable cutting head with sheet support - Operating manual - Location: our facility in Frauenfeld No warranty or liability for used machines. Pre-inspection and functional test are desired.

Condition: new, Year of construction: 2025, Hydraulic bending machines HKS-CNC Profi are equipped with automatic scissors and a movable mass for moving sheet metal. CNC software enables the graphic design of profiles of various forms and sizes. A 21,5-inch industrial LCD touch-screen makes the programming even more manageable. Working length: 4.000 mm Machine length: 5.100 mm Sheet metal thickness: 1,5mm (Al), 1,25 mm (Stahl) Stand number: 4 Machine weight: 2.500 kg Delivery time: in stock Gbodpextyabsfx Ah Eow

Condition: new, pressing force: 10 t, - Capacity 10 tons - Bending capacity 150 x 8 mm - stroke 200mm - NC touch screen control Gedju Sl U Aepfx Ah Ejbw - Foot control - Emergency stop - 400V

Year of construction: 1999, condition: ready for operation (used), Product diameter range: 0.5mm-5mm, max. strip width: 40mm, max. feed length: 320mm, standard slide units: 4, stroke: 94mm, narrow slide units: 1, stroke: 70mm, center punch stroke: 52mm, max. pressing force: 250kN, eccentric press stroke: 16mm, max. stroke rate: 250strokes/min, max. output rate: 132pieces/min. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg, control system: Bihler. Documentation available. On-site inspection possible. Gsdpfxsxrf Izo Ah Eobw

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Gedpexrd Rnjfx Ah Ejbw Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Gbodpjuzlh Isfx Ah Eow

Condition: excellent (used), Year of manufacture: 2007 Weight: 20,000 kg Maximum working length: 2560 mm Maximum sheet thickness (mild steel): 2.0 mm Gbsdpfx Ajwbd N Eoh Eow Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminum): 3.0 mm Additional equipment: cut-out feeder, tools UNDER POWER!!! TEST RUN POSSIBLE

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Gbodpsxn I Rwjfx Ah Eow

Condition: new, – Capacity: 34 x 3 mm – Digitally adjustable stroke – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm Gsdpjxq Hl Esfx Ah Esbw – Documentation – Weight: 80 kg – 400V

Condition: new, Year of construction: 2026, control type: CNC control, controller model: Easybend 2D, working width: 3,100 mm, bending force (max.): 150 t, distance between stands: 2,600 mm, New machine Haco press brake type OPTIFORM 3m x 150T Easybend CNC controller Rear motorized back gauge axis XR Manual table for standard European-type tooling Manual fast clamping system for punches, European System type DSP light barrier Option: 2 swiveling front support arms Gbjdpfx Asxan Imoh Ejw Version OPF 30150 + : with XRZ1Z2 backgauge - CNC crowning

Condition: new, Ostas Profile Ring Bending Machine OPK 105 Gbodpexrd H Nsfx Ah Esw Technical Specifications: • Tool holder, shaft: 100 mm • Tool: 315 mm • Working speed: 7 m/min • Motor: 7.5 kW • Dimensions L-W-H: 1980 x 1450 x 1650 mm • Weight: 3130 kg • 3 driven rolls • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working positions • Side angle guide rolls • Digital displays (2 pcs.) • Brake motor • Compliant with CE standard

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm Godjq Sz Ahspfx Ah Eebw - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Gbedpfxou Itlnj Ah Ejw Siemens PLC control system with touchscreen user interface

Condition: used, Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): up to 6.5 mm at ≤1600 N/mm² up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Maximum wire feed speed: approx. 40 m/min Godpfxjxr Ncve Ah Eobw Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg

Condition: new, functionality: fully functional, machine/vehicle number: SME130-0108, roller (top) diameter: 130 mm, working width: 1,550 mm, overall weight: 1,360 kg, total length: 2,320 mm, total width: 850 mm, total height: 1,200 mm, power: 2.2 kW (2.99 HP), Equipment: documentation/manual, emergency stop, The following special equipment is included in the price: - hardened rollers (suitable for stainless steel bends) - Motorized rear roller adjustment - Digital display Max. working length (sheet width) 1550 mm Max. sheet thickness 4.5 mm (material in St-37 quality; yield strength 240 N/mm2) Max. sheet thickness 4.0 mm when bending (material in St-37 quality; yield strength 240 N/mm2) Upper roller diameter 130 mm Min. bending diameter 195 mm Motor power 2.2 kW Machine dimensions (L/W/H): 2320 mm / 850 mm / 1200 mm Machine weight: 1,360 kg Bending speed: 5.3 m/min Gsdpfx Ajvxu Hwoh Esbw Upper and lower rollers electrically driven Cast iron housing Upper roller can be swiveled for easier removal of the Materials Conical bending device Asymmetrical roller arrangement Main rotor self-braking Separate, portable control and operating panel with digital display and foot pedals for control Safety line CE marking

Condition: used, Year of construction: 2008, functionality: fully functional, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness (max.): 2 mm, sheet thickness brass (max.): 2 mm, sheet thickness copper (max.): 2 mm, Goteneds K25-30 A2 Max długość paska blachy 3100 mm Godpfsw Ea Edex Ah Eebw max grubość (blacha stalowa 2,0 mm) obrotowa belka górna – możliwość zaginania blachy z 4 stron rok produkcji 2008

Condition: used, From a business closed some time ago, we offer the following folding machine: Schröder AKV 250 bending brake Bending capacity slightly over 2.5m Bending capacity in steel – 1.5mm, more for aluminum Foot-closing device Angle display Optional back gauge or other accessories such as segmented top beam, etc. available Schechtl MT 250 guillotine shear Depth stop Sheet extraction table Cutting length slightly over 2.5m Cutting thickness 1.25mm Alternatively, several other guillotine shears from Schröder or Schechtl are available Additionally, we have many more of these machines in stock, as well as equipment and tools for sheet metal processing. Gbjdpjtul A Tsfx Ah Eew

Condition: used, pressure 32 t Godpfx Aogvkigeh Ejbw stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Condition: used, Year of construction: 2007, functionality: fully functional, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, sheet thickness brass (max.): 3 mm, Goteneds futura – 20. Max długość paska blachy 2100 mm Gbjdow Eax Depfx Ah Eew max grubość (blacha stalowa 3 mm) obrotowa belka górna – możliwość zaginania blachy z 4 stron rok produkcji 2007

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm Gjdpjgvkmrefx Ah Eebw diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Year of construction: 2005, functionality: fully functional, Goteneds futura – 25. Max długość paska blachy 2600 mm max grubość (blacha stalowa 2,5 mm) obrotowa belka górna – możliwość zaginania blachy z 4 stron rok produkcji 2005 Gedpfxsw Ea Ape Ah Ejbw