Rolls bending machine - 3 Rolls

OSTAS ORM 2070 x 140

Condition: new, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2070 x 4 - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamp) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamp) - Continuously adjustable speed Dodshvr Nljpfx Agcola - Hardened rollers - Tapered rollers - Removable top roller - Brake motor - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA Dlodpfx Aew Rrbysgcoa helical angle -45 / + 120 ° weight of the machine ca. 10 t

Condition: new, 3-roller round bending machine ORM 2070 x 140 Technical specifications: Special equipment included in the price: motorized bottom roller adjustment hardened rolls motorised rear roller adjustment Digital display Plate width 2070 mm Sheet thickness 5.0 mm max. Bend sheet thickness 4.0 mm Roll length 2070 mm Roller diameter 140 mm Dledjfig Apspfx Agcea Weight 1730 kg Dimensions L-W-H 3230 x 880 x 1100 mm Engine: 2.2 KW Equipment: upper and lower roller electrically driven Upper roller swivels out Conical bending device asymmetrical roller arrangement self-braking main engine sep. control and operating panel Safety leash CE mark

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm turning speed range 0 - 2830 U/min work height max. 945 mm milling-head swivable +/- 180° engine output 1,5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones Dljdeukwdfspfx Agcoa grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: used, Year of construction: 2011, functionality: fully functional, spindle speed (min.): 12,000 rpm, grinding wheel diameter: 200 mm, overall weight: 5,000 kg, power: 20 kW (27.19 HP), warranty duration: 6 months, Our machine is in working condition and has automatic chain loading. Installation and training will be done by our company. The machine will be sold with a 6-month warranty. Please contact us for price and other questions. Dsdpfx Aswizq Njgcola

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Djdpfx Agsv E R Eijcola Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: good (used), turning diameter: 5,000 mm, travel distance Z-axis: 2,000 mm, turning length: 2,500 mm, The machine is in good technical condition, fully functional, modernized in 2008. It is equipped with a Siemens Sinumerik 802 D control system, a maximum turning diameter of 5000 mm and a clamping plate diameter of 2500 mm. The workpiece weight is 40 tons and the height is 2000 mm. Dlsdpfx Ajv Dkykjgcea

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg Dledpfsg Tzbwex Agcja

Condition: new, Year of construction: 2025, CFM-01 MACHINE FOR CUTTING PROFILES Dledpfxefwxxns Agcsa The machine has been designed for cutting profiles used for P20 or P30 ventilation ducts and fittings. The cutting quality is very high, it does not leave any burrs after cutting. Cutting that can be made in any length thanks to the ruler adjustable from 0-1500 mm. The diamond blade used is many times longer than band saws. The machine has a system of pneumatic cylinders responsible for the movement of the disc and material pressure. Thanks to the foot pedal, it provides quick and convenient cutting of profiles.

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • manual version Dodefv H Ehjpfx Agcjla • 4 set of wheels • Foot control • Brake motor • Emergency stop