Bernardo for sale
Identified location: (PT) (Edit)
|
11
Fröndenberg/Ruhr, Germany
1932 km
2010
good (used)
Used 5-fold combination machineFormat circular sawDrichteDickteTischfräs eLanglochbohrinrichtungMa nufacturer BERNARDOTyp CU 310 FBaujahr 2010Ma. Nr. 10050001Slide length 2,60 mMax. Saw blade diameter 315 mmWith scoring saw Dressing width 310 mmMax. Planing height 225 mm3-knife-shaftmilling spindle 30 mmadjustment travel 100 mmspeeds 1,800 to 9,000 rpm.Chuck holder up to 16 mmWith extraction BERNARDO DC 400, year 2016location of article: 58730 Fröndenberg/RuhrThe machine can be inspected and teste... more
|
|
5
turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 274 mm turning dia. in gap 690 mm spindle bore 58,0 mm turning speeds 30 - 2.000 U/min bed width 300 mm Beobniwkhb spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 130 mm total power requirement 5,5 kW weight of the machine ca. 2020 kg. range L-W-H 2750x1080x1370 mm more
|
|
6
Hessisch Lichtenau, Germany
dealership location
2024 km
used
New belt grinding machine BERNARDO type MS 150x2000 S Bandwidth 150 mm Length of belt 2000 mm Belt speed 29 m/sec. Speed 2800 rpm. Motor power 3 KW = S1 at 100%ED Mains connection 400 Volt, 50 Hz, 16 Ampere CEE plug Contact wheel/drive wheel Ø 200 x 150 mm - Surface grinding table 150 x 460 mm with graphite base - hinged metal cover above the surface grinding table - Contact wheel with polyurethane coating - Safety switch with motor protection and undervoltage release Ciwggku7 - Prepared for ex... more
|
|
1
84552 Geratskirchen, Deutschland
2049 km
ready for operation (used)
Engine power: 1.8 PS/HP (1.5 kW), year of construction: 2017, engine voltage: 3x 400 V, engine frequency: 50 Hz, suction connection Ø: 130 mm, chip bag capacity (ltr): 300, maximum negative pressure (Pa): 1800, suction power (m³/h): 2520, suction connection: 1x 130 / 2x 100 mm, filter area: 1.45 m², idle speed: 2950 rpm, sound pressure: 87.1 dB Now9l more
|
|
5
Wiefelstede, Germany
dealership location
2086 km
used
Chip extraction, filter extraction, bag filter, Rohluftabsauganlage -400 V 2200 watts Bypkw8ca -Connection 1 x Ø 150/3 x Ø 100 mm -Dimensions 1440/720/1950 mm -Weight 56 kg more
|
|
1
Roitham, Austria
dealership location
2116 km
used
Saws FKS1600N, good condition, 1,5 kW, 1600 mm table width, 170 kgPreisänderungen reserved, errors, printing, and typographical errors reserved Sdbwzdv9 more
|
|
1
Mindelheim, Germany
dealership location
1890 km
new
Band dimensions: 75 x 2000 mm Band speed: 14.5 / 29 m/sec. Contact disc x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Suction connection: 100 mm Engine power S1 100%: 2.4 / 3.0 kW Lkl3f Motor recording power S6 40%: 3.0 / 4.0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg Promotional price until 31.08.2019 or as long as the stock lasts: free house 1 address within DE (without islands) more
|
|
4
width of the strips 150 mm band length 2000 mm band speed 14,5 / 29 m/sec grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4,0 kW 100% ED weight 84,0 kg range L-W-H 1.080x520x1000 mm Beobigsksq more
|
|
6
Hessisch Lichtenau, Germany
dealership location
2024 km
used
New belt grinding machine BERNARDO Type MS 75x2000 S Bandwidth 75 mm Band length 2000 mm Belt speed 29 m/sec. Speed 2800 rpm. Engine power 3 KW = S1 at 100%ED Mains connection 400 volts, 50 Hz, 16 ampere CEE plug Contact disc/drive disc of 200 x 75 mm - Surface grinding table 75 x 460 mm with graphite base - Hinged metal cover over the surface grinding table - Contact disc with polyurethane flooring - Safety switch with motor protection and undervoltage trigger - Prepared for external suction (c... more
|
|
2
84552 Geratskirchen, Deutschland
2049 km
2017
ready for operation (used)
Engine power: 3,0 PS/HP (2,2 kW), year of construction: 2017, suction connection Ø: 100 mm, cutting speed: 420/840 m/min, cutting height (mm): 260, cutting width: 410 mm, suction connection: 2x 100mm, saw blade width: 9,537 mm, saw table inclination: 5 to 45°, saw blade width: 9,537 mm, saw blade inclination: 5 to 45°. Vssglm more
|
|
|
|
5
Wiefelstede, Germany
dealership location
2086 km
used
Chip extraction, filter extraction, bag filter, Rohluftabsauganlage -400 V 1500 watts -Connection 2 x Ø 100 mm Vsrvci -Dimensions 840/820 / H2000 mm -Weight 50 kg more
|
|
1
working length 1.200 mm plate thickness 1 mm Rtnbezwp weight of the machine ca. 0,4 t hand pivot bending machine with bending segments single segments more
|
|
2
Mindelheim, Germany
dealership location
1890 km
new
Drilling capacity: 28 mm Thread cutting max.: M12 Chuck: 1-13 mm / B-16 Dome: MK 3 Spindle speed: (12) 75-3200 RPM Throat depth: 250 mm Distance from spindle / table Max: 810 mm Be0oia0s Distance from spindle / base plate: 1210 mm Quill stroke: 130 mm Column diameter: 100 mm Work surface of bottom plate: 325 x 330 mm Table size / T - slot size: 375 x 375 mm / 14 mm S1 motor power output 100%: 0.85 / 1,1 kW (400 V) S 6 absorbed motor power 40%: 1,1 / 1,5 KW (400 V) Machine dimensio... more
|
|
6
turning length 1000 mm turning diameter 350 mm turning dia. in gap 450 mm spindle bore 40,0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper 55029 D 1-4 taper in tailstock 3 MK quill travel 110 mm Nlog2 total power requirement 1,5 kW weight of the machine ca. 529 kg. range L-W-H 1730x700x1340 mm more
|
|
1
Roitham, Austria
dealership location
2116 km
used
5-fold combo Bernardo CU310F-2000, like new, year 2018, saw 3.8 kW, cutter 2.8 of kW, Planer 3.8 kW, 2000 mm reserved format table length, 3 blades, 565 kgPreisänderungen, errors, printing and typographical errors reserved Belretp97w more
|
|
2
91227 Leinburg, Deutschland
2014 km
ready for operation (used)
Motor power: 4.0 HP / HP (3.0 kW), year of construction: 2003, type: basic 2600, cutting width: 980 mm, square table: Yes, Formatschiebetisch: 2450 mm L2xdl more
|
|
1
Wiener Neudorf, Austria
dealership location
2293 km
2005
ready for operation (used)
Cutting capacity round 90 ° and 170 mm Cutting performance square mm Delivery promptly, subject to prior sale Cutting capacity: 90°: approx. 170 mm, rectangular 170 x 210 mm 45°: round 120 mm, rectangular 110 x 110 mm Band saw blade dimensions: 2.110 x 0, 9 x 20 mm Belt speed: 40/80 m / min. Bdslf9gnrl Motor: 0.37/0.75 kW Length: 1250 mm Width: 540 mm Height: 1,400 mm Weight: 156 kg Swivel frames continuously adjustable reduction with HydraulikzylinderSchraubstock with Schnellarreti... more
|
|
3
GAIS, Switzerland
1785 km
good condition (used)
Bernardo combined grinding machine KMS 200. Used only a few times and in very good condition incl. brass brush, polishing brush and 20 grinding strips Universally applicable for a wide range of materials (metal, plastic, wood, ..). Suitable for polishing and brushing metal, plastic and non-ferrous materials. Easy grinding belt change by means of quick-release levers. Ideal for deburring, surface and contour grinding. 7fh0zo2o Technical data: - Grinding wheel x W: 200 x 32 mm - Grinding whee... more
|
|
1
Mindelheim, Germany
dealership location
1890 km
new
Working length: 1020 mm Max sheet metal staerke: 2.5 mm Maximum opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Characteristics: - Universally applicable bending machine for sprinkler and repair shops - Robust construction in modern design - Easy adjustment of the upper cheek by means of a foot pedal, haende are free for the factory - Manual bending machine for standard bending tasks - Segmented upper cheek for a la... more
|
|
4
bore capacity in steel (diameter) 40,0 mm Mulu3o throat 320 mm bore stroke 160 mm morse taper 4 MK table: 500 x 420 mm turning speeds 90 - 1455 U/min total power requirement 1,0 / 1,5 kW weight of the machine ca. 450 kg. range L-W-H 500 x 930 x 1870 mm more
|
|
1
Roitham, Austria
dealership location
2116 km
used
AD - Planer Bernardo PT300, BJ. 2017, like new, 3 kW, reserved 1520 mm table length 305 mm table width, 4 blade, 280 kgPreisänderungen, errors, printing and typographical errors reserved Gutolfj more
|
|
2
91227 Leinburg, Deutschland
2014 km
ready for operation (used)
Motor power: 3,8 HP / HP (2.8 kW), built in: 2007, cutter angle adjustment: manual, spindle height adjustment: manual, speed milling machine: 1800 / 3000 / 6000 / 9000 rpm, table made of cast iron, fold-down seat Cwl9s2kk more
|
|
1
Mühltal (Nieder-Ramstadt), Germany
1874 km
new
Description Universal coolant system 11 litre - 400 V Technical specifications No information Ne7bn more
|
|
5
GAIS, Switzerland
1785 km
2016
good condition (used)
Bernardo BF 25 L Super drilling and milling machine. Used only a few times and in very good condition incl. collet chuck (art. 26-1006), range of clamping tools (art. 28-1004) and vice (art. 28-2086) - DC motor for optimum torque in the lower speed range - Digital speed and drilling depth display included in delivery - Large-sized cross table with T-slots, precisely surface-worked - Swallowtail guide for x-, y- and z-axis, adjustable via wedge strips - infinitely adjustable speed, adjustable... more
|
|
6
Mindelheim, Germany
dealership location
1890 km
2016
new
Roller length: 1250 mm Sheet metal staerke max. 1.25 mm Roller diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg Price is net, plus VAT, free house 1 address Germany (without islands). Ssfdwc more
|
|
6
turning length 1000 mm turning diameter 410 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52,0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK Beobofj2de quill travel 120 mm total power requirement 3,3 kW weight of the machine ca. 1550 kg. range L-W-H 2,03 x 1,0 x 1,45 m more
|
|
1
Roitham, Austria
dealership location
2116 km
used
Bernardo saw cutter PSM2600, 2016, good condition, swiveling KR & FR, standard equipment, 3 kW, 315 mm ø shaft/blade, cutting length of 2600 mm, 2600 mm format table length, 440 kg, 4500 rpm, scoring 90 x 20, cutting width on the fence 1220mmPreisänderungen reserved, errors, printing, and typographical errors reserved Bdf8ns0pwb more
|
|
3
84552 Geratskirchen, Deutschland
2049 km
ready for operation (used)
Engine power: 3.0 PS/HP (2.2 kW), planing shaft: 3 planing knives, year of construction: 2018, planing width: 250 mm, cutting width: 510 mm, jib table: Yes, sliding table: 1300 mm, circular saw blade Ø max.250 mm, milling spindle Ø: 30 mm, accessories: with slotted hole drilling device, planing stop swivels 90° to 45°, max. chip removal: 5 mm, thickness planer width: 250 mm, max. chip removal 1.8 mm Bfnirgtm9r more
|
|
7
An der Schillertanne 7, 64367 Mühltal (Nieder-Ramstadt), DE
1874 km
2017
new
Bernardo Doppelgehrungs - band saw MBS 300 DG-V PRO variable speed Description Professional band saws for General workshop use, fitters... For the cutting of hollow profi les and solid materials, stainless steel, tool steel,... Twist-free, heavily dimensioned saw frame made of spheroidal graphite cast iron Simple setting of the variable speed Adjustable hydraulic cylinders to the pad pressure regulation of the saw bar Swivel saw bracket for double mitre cutting to ... more
|
|
5
De Branten 13, 6027 NL Soerendonk, NL
1810 km
as good as new (ex-display)
Bernardo vertical beltsawmachine offered. Bnwvb2z Type: HBS 250 N Table: 350 x 330 mm Max workpiece heigth: 105 mm Speed: 700 m/min Table adjustable 45 degrees Dimensions: 55x40x145 cm (LxWxH) Power: 230 V Like new! For more information call us or send an e-mail. more
|
|
1
Working table: 750 x 290 mm Table lift adjustment: 185 mm Band length: 2600 mm Bandwidth: 150 mm Grinding belt back wall: 850 x 200 mm Grinding unit swivel: 90° - 45° Band speed: 20 m/sec. Additional table: 330 x 330 mm Zcmruiym Oscillation stroke: 20 mm Oscilation motor: 0.25 kW (0.34 hp) Suction connection: 120 mm Engine power S1 100%: 3.0 kW (4.0 hp) Engine recording power S6 40%: 4.5 kW (6.0 hp) Voltage: 400 V Machine dimensions (W x D x H): 1700 x 700 x 1080 mm Weight approx... more
|
|
5
turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25 - 1600 U/min Be02gjobgb swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 2720 kg. more
|
|
4
The lathe Profi 750 LZ is equipped as standard with a guide and traction spindle for thread cutting or for automatic feed. New in this model is the standard slip clutch and the micrometer longitudinal stop. Furthermore, there is the possibility of retrofitting the machine with a milling attachment FA 16. Characteristics Bernardo Zugspindeldrehmaschine Profi 750 LZ Very handy, stable machines with guide and traction spindle The feed adjustment is simple, smooth and precise switchable. Versat... more
|
|
5
Bernardo angle Benders WB 100 Technical specification Bending performance * cold Flat steel 100 x 5 mm 65 x 10 mm Steel rod 18 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Copper 100 x 10 mm 100 x 15 mm aluminium Machine dimensions (W x D x H) 800 x 250 x 230 mm Weight 23 kg Material I a tensile strength 400 N / mm² Properties Gvt9y8 The exact cold - and hot bending of flat, round and square steels Stable construction to tighten the screws on the Workbench ... more
|
|
5
Mühltal (Nieder-Ramstadt), Germany
1874 km
2017
new
Band saw Bernardo HBS275 Section about 90°: 225 mm Cutting range, square 90°: 200 x 200 mm Section flat 90°: 245 x 150 mm Section about 45°: 160 mm Section square 45 °: 160 x 160 mm Section about 60°: 100 mm Cutting range, square 60°: 100 x 100 mm Working height: 910 mm Band saw blade dimensions: 2480 x 27 x 0,9 mm Cutting speeds of 400 V: 45 / 90 m / min Coolant pump S1 100%: 100 W S1 motor power output 100%: 1,1 kW Motor power S6 40%: 1.5 kW ... more
|
|
15
hydraulic heating-plate-press BERNARDO HFP 100-1 year of constr. 2013, condition as good as new press area 2500 x 1300 mm press power 100 tons max. open 380 mm press plates 1 piece cylinders 6 pieces x diameter 85 mm hydraulic pump 4,0 kW oil conveyor drive 1,5 kW heating plate power 18 kW characteristics: high operating comfort because of open construction (machine is available from all 4 sides). heavy and torsion-resistant construction 42 mm heavy press plates gu... more
|
|
1
Total plate dimensions: 2120 x 760 mm Plate dimension without pliers: 1900 x 600 mm Plate staerke: 40 mm Z9xa038z Drilling for bench hooks: diam. 19 mm Clamping jaws on the left (front pliers): 500 x 55 mm Clamping jaws right (rear pliers): 470 x 120 mm Wingspan front/rear pliers: 210 / 180 mm Bench hook bar: 38 x 120 mm Work shoehe: 860 mm Weight approx.: 73 kg Delivery: - Drawer - Beilade - 2 x round bench hook short - 2 x round bench hook long Optional at an additional cos... more
|
|
4
sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm Bewh82buea table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m more
|
|
8
Due to the large number of setting options of the milling head of the robust and stable multi-purpose milling machine, this model is optimally suited for drilling and milling work in the production of individual parts, in repair and in the field of training of light and medium-weight workpieces. - Work table with large clamping surface, surface hardened and ground - Infinitely variable spindle speed with mechanical spindle brake - Universal milling head, rotatable, tiltable and tiltable - ... more
|
|
13
Folding machine with segmented clamping beam TB 1020 Technical specifications Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.5 mm Maximum opening width 48 mm Bending angle 0-135 ° 1350 mm wide Depth * 1115 mm Height 1140 mm Weight approx. 290 kg * with Backgauge Properties Yu9e97gl Universal bending machine for sheet metal working and repairers Robust construction in modern design Slight adjustment of the upper beam by means of foot pedal, hand... more
|
|
1
Mühltal (Nieder-Ramstadt), Germany
dealership location
1874 km
new
Technical specifications Load capacity max. 7nujmavlg 4000 kg Edition Ø 90 mm Roll Ø x W 18 x 51 mm Handle length 850 mm Dimensions Edition front/rear 154 x 102 x 90 mm Approximate weight (set) 21 kg more
|
|
3
Roll width 400 mm Roll diameter 50 mm Height adjustment 685 - 1170 mm Load capacity, max. 100 kg Standpipe diameter 57 / 40 mm Weight approx. 7 kg Be2pwhz980 more
|
|
1
Table dimensions: 1000 x 360 mm 2pkvze Format table table dimensions: 1000 x 240 mm Dimensions table (option): 600 x 410 mm Working height: 895 mm Spindle diameter: 30 mm Swivel spindle: + 5 ° to 45 ° The spindle height: 100 mm Clamping length: 100 mm Max tool diameter: 200 mm Max tool diameter retractable: 180 mm Platen opening: 200 mm Spindle speed: 1800 / 3000 / 6000 / 9000 R/min Suction connection diameter: 100 mm S1 motor power output 100%: 2.8 kW (3.8 HP) Motor power S6 40%:... more
|
|
6
turning length 1000 mm turning diameter 380 mm turning dia. in gap 490 mm spindle bore 51,0 mm B3ppnzk8 turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1920 x 800 x 1660 mm more
|
|
6
Fabriko 3a, LT-55111 Jonava, LT
3081 km
excellent (used)
Bby372dqvg Motor 0,18 kW Engine speed 2760 rpm Table dimensions 550x750 mm Made in Austria more
|
|
15
Bernardo train, crosscut and double mitre saw ZKG 305 D Bemvsfwtd7 Saw blade diameter x bore 305 x 25.4 mm Idle speed 4800 RPM Cutting area: Straight at 90 ° / 90 ° 340 x 95 mm MITRE at 45 ° right / left 240 x 95 mm Bevel cut at 45 ° left * 340 x 55 mm Bevel cut at 45 ° right * 340 x 55 mm Double mitre cutting at 45 ° left 240 x 55 mm Double mitre cutting at 45 ° right 240 x 55 mm Engine power 1.6 (2.2 kW) Voltage 230 V Machine dimensions (W x D x H) 860 x 900 x 680 mm ... more
|
|
3
Mühltal (Nieder-Ramstadt), Germany
dealership location
1874 km
2016
new
Technical specifications 3uhb9qzco Payload capacity 3 to Hub area level 1 15-170 mm Hub area level 2 75-225 mm Lifting range level 3 135-285 mm Weight approx. 21.5 kg more
|
|
1
Suction capacity 4000 m3/h Suction connection of 160 or 3 x 100 Filter cartridge 2 x 4 sqm Chipbag contents 2 x 170 l 2rh2gu Engine power 2.2 kW Connection 400V Built in 2012 more
|
|
2
Mindelheim, Germany
dealership location
1890 km
new
Table size: 940 x 640 mm Table hoea: 800 mm Volume flow max.: 2500 m ³/h Engine power: 0.35 kW (0.5 hp) Voltage: 230 V/50 Hz Weight about: 95 kg Hsllw77 Special price for warehouse goods more
|
|
4
bore capacity in steel (diameter) 32,0 mm throat 230 mm bore stroke 120 mm Fb8ixap morse taper 3 MK table: 400x320 mm turning speeds 105 - 1725 U/min total power requirement 1,2 kW weight 245 kg range L-W-H 470x810x1710 mm more
|
|
|
