Used Biolux Ng Microscope for sale (9,073)

Condition: ready for operation (used), Item: M-8913-APV Cheese Aging Shelves Cheese maturing shelves" or "cheese aging shelves". These terms refer to the specialized shelving used to store cheese while it ages or matures under controlled conditions. Shelves are made of special hard foodgrade material. Dimension: 1900 X 900 X 1700 Iedpfx Astmthnohyeht They can be stacked.

Condition: used, Year of construction: 2018, Field of application: Construction Serial number: 20xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22084 Specifications: Model year: 2018 Weight: 1,080 kg Capacity: 4,000 liters Width: 255 cm Ihjdpfx Ajx Izrwohyst Ready for delivery Own weight: 1080 Model: BM L120 strøskuffe

Condition: used, machine/vehicle number: WDB9061551N51xxxx, mileage: 99,500 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 18275 Specifications: Ihjdpfjxq Dg Hex Ahyst Model year: 2012 163 hp – 4 cylinders Approx. 103,000 km (may increase slightly) Euro 5 Manual transmission 4x2 drive Wheelbase: 433 cm Curb weight: 2460 kg Length: 676 cm Width: 210 cm Tires (see photos) HIAB crane Radio AC/climate control 3 seats Ramps included (see photos) Brand new winch included (see photos) HIAB crane included Delivery by agreement Description:2012 Mercedes Sprinter flatbed truck with only approx. 103,000 km.Includes loading ramps and a brand new, installed winch.Delivery by arrangement. Km: 99500 HK: 190 Technical approved: Yes EU-approved until: 01.09.2026 Own weight: 2460 Total Weight: 5000 Payload: 2465 Width: 210 Length: 676 Euro: 5 Model: Sprinter 516 m/ kjørebruer og HIAB kran, EU godkjent Gearbox: Manual

Year of construction: 2011, condition: used, Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20555 Specifications: Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200 Own weight: 11 Ijdpfjwph Egox Ahysht Model: Gemrok 45 borevogn. SE VIDEO

Year of construction: 1999, condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers - 4 cylinder water-cooled Deutz engine Isdpfoxlnlijx Ahyoht - Okay chassis - Ready for delivery Description: Owner says it works as it should and that it is a 1999 model It is Ready for Delivery Own weight: 1 Model: Copco Roc Borerigg

Year of construction: 2021, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22061 Specifications: Ihedpfx Ahox Ip Tpeyjt 2021 model Approx. 5.5 meters wide Lightly used Ready for delivery Description: Folding wing from 2021.The owner has hardly used it.Ready for delivery. Own weight: 11 Model: 5,5 m

Year of construction: 2021, condition: used, Serial number: U-H2 52-75-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22059 Specifications: Model year 2021 Weight: 2,500 kg Ready for delivery Own weight: 2500 Ihjdpox Ip Uysfx Ahyjt Model: Schmidt U-H2 klappvingeskjær

Year of construction: 2016, condition: used, Serial number: 01-Fxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21955 Specifications: 2016 model Hours: 90 kW Undercarriage (see photos) 3 fractions Steel on feeder See video Delivery by agreement Description:2016 Keestrack Frontier screening plant.The hours will increase as the machine is in daily operation.Delivery by agreement. Own weight: 111 Model: Frontier sorteringsverk. SE VIDEO Ijdpjx A R Uzsfx Ahysht

Condition: used, machine/vehicle number: XL9K0C5021105xxxx, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21926 Specifications: Model year: 2011 New EU inspection will be carried out Length: 1367 cm Wheelbase: 130/181 cm Permitted payload: 31,819 kg Full side opening and roof opening 33 pallets Tires (see photos) Remote control Walking Floor operated by cable Iedex Dqqrspfx Ahyjht Water tank that can be connected to a pressure washer Axle 3 has been replaced Bolt replaced and adjustment washer mounted on axle 3, left side New shock absorbers and four bolts on axle 2, both sides Delivery by agreement Description: 2011 Knapen KCW Walking Floor.A new EU inspection will be carried out on the trailer.It is possible to connect a pressure washer; the owner states it has not been used for several years.Delivery by agreement. Technical approved: no EU-approved until: 30.11.2025 Own weight: 11181 Total Weight: 43000 Payload: 31819 Width: 255 Length: 1367 Model: Kcw Walking floor 33 pallers

Year of construction: 2005, condition: used, Mileage: 371.000 km Field of application: Freight transport Serial number: WMAH21ZZ15W05xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21927 Specifications: Model year: 2005 EU-approved until 06.12.2025 Mileage: approx. 371,000 km Isdsx Am Spjpfx Ahyeht Euro 3 Wheelbase: 450/135 cm 430 hp 2005 Maskoflex 312 body Movable partition wall Full air suspension Engine break Steerable tag axle Remote control Webasto heater in one of the cabinet Tires (see photos) Studded tires on drive axle, regular tires on the rest Owner states approx. 40 m suction hose Owner states approx. 100–120 m flushing hose Manual gearbox AC/climate control Delivery by agreement Description:2005 MAN TGA 26.430 6x2 suction/flushing truck with Maskoflex body.The body is equipped with a movable partition wall.See video. Km: 371000 HK: 429 Technical approved: no EU-approved until: 06.12.2025 Own weight: 18180 Total Weight: 27000 Payload: 8745 Width: 253 Length: 930 Euro: 3 Model: TGA 26.430 6x2 sug-/spylebil m/ Maskoflex påbygg. SE VIDEO. Gearbox: Manual

Year of construction: 2020, condition: used, Serial number: U-H2 58-74-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22058 Specifications: Ihjdpfx Asx Ip Umjhyot 2020 model Weight: 2635 kg Ready for delivery Own weight: 2635 Model: klappvingeskjær

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Ihjdpfowx Ii Rsx Ahyet Description: - Length of conveyor: 25 mtr - Delivery to the right

Condition: used, Year of construction: 2019, operating hours: 8,100 h, Serial number: HCMDDN5XE0002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22126 Specifications: Model year: 2019 Hours: 8,100 Ihodpfex Ty R Njx Ahyot Weight: 31,700 kg Power: 197 kW Undercarriage (see photos) New bottom rollers, according to owner Digging bucket included Rear-view camera Side camera Central lubrication system Narrow bucket not included Gjerstad quick coupler Climate control / AC Additional work lights Video available Description:Hitachi Zaxis 300 from 2019.The machine is sold with digging bucket only; narrow bucket is not included.Services have been carried out both by the owner and at a workshop.Ready for delivery. Hours: 8100 Own weight: 31700 Kw: 197 Model: ZX300LC-6 Beltegraver m/ Graveskuffe.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 07/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Iedoyamugspfx Ahyjht Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: good (used), Technical data for the pallet racking system: Ihodpfxeyapf Io Ahyst Racking system: SSI Schäfer Type: PR 600 Technical data for the setup: Number of racking rows: 01 unit Length per racking row: 14,040 mm Number of bays per row: 05 units Number of levels plus ground level: 02 units Volume data: Pallet locations per bay: 09 units Pallet locations per row: 45 units Total pallet locations: 45 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 1,100 kg Scope of delivery includes: 06x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame protectors, and base plates Frames are pre-assembled (bolted truss design) Height: 3,600 mm Depth: 1,050 mm 20x pallet racking beams, used Material color: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,300 kg, with evenly distributed load Note: Functionality of the beams is ensured despite holes (SSI project with heat protection plates bolted as per manufacturer’s specifications) 40x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Material: fully galvanized For leveling racking frames placed on uneven floors 01x load sign With specification of bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope of delivery.

Condition: used, Year of construction: 2004, operating hours: 12,270 h, Please contact ATS Norway for more information Please provide reference number upon request: 17220 Specifications: 2004 model Hours: approx. 12,500 (will increase) Weight: 38,800 kg Undercarriage (see photos) Track width: 60 cm Digging bucket Mikrofyn GPS system (condition uncertain) Auxiliary hydraulics Additional lights Central lubrication Quick coupler Service performed by owner Ready for delivery Ihodpfsvgyfnex Ahyst Description:Volvo EC360 crawler excavator.The machine is sold with a digging bucket and GPS.The owner states that the machine is in working condition.Ready for delivery. Hours: 12270 Total Weight: 38800

Condition: used, Year of construction: 2001, operating hours: 13,320 h, Serial number: K3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18892 Specifications: - 2001 model - Certified until 02.25 Ihjdpovgx Rpofx Ahyet - Hours: Approx. 13,320 - Weight: 24,500 kg - 118 kW - Undercarriage (see pictures) - Belt width: 60 cm - KM quick release - Gjerstad Grave bucket - Extra light - Easy Dig Novatron - Radio/CD - Climate/AC - Services taken by owner - Ready for delivery Description: Komatsu PC290 Tracked excavator from 2001. The machine is sold with a quick-release attachment and digging bucket. Certified until 02.25. Hours: 13320 Own weight: 24500 Total Weight: 24500 Year controlled: Yes Year controlled until: 02.25 Kw: 118 Model: PC240LC-6K Beltegraver m/ Graveskuffe

Condition: used, machine/vehicle number: 224xxxx, Year of construction: 1991, Please contact ATS Norway for more information Please provide reference number upon request: 18312 Specifications: - Not eu approved - 4 axle with loose axle - Missing pictures of axle 4 - Good tires - Air suspension - Manual Extraction 3 metres - Hydr. width of 25 cm on each side - Force on axle 3 - Lift on 2 and 3 - Turn on 1 - Total length 1620 cm Iodpfx Aovg Awyshyoht - Width 250 cm - Wheelbase 182/182 cm - Hanger is varnished - Rust will occur - Sold with 21 2-er errors and 0 3-er errors - A number of valve faults that have the most points - Ready for delivery Description: 1991 Vang 4 axle well trailer sold as a repair object. It's quite a long patch, but a lot of it is small things. Call for more info. The trailer has an extension of 3 meters and approx. 25 cm hydr. widening on each side says owner. Forced steering on axle 3, lift on 2 and 3. turn on 1. It comes with a loose axle, we lack pictures of it. The trailer is ready for delivery. Technical approved: no EU-approved until: 31.10.2023 Own weight: 10300 Total Weight: 63000 Payload: 52700 Width: 250 Length: 1630 Model: 4 akslet brønnhenger

Condition: used, machine/vehicle number: XLRAE75PC0E93xxxx, mileage: 95,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 22122 Specifications: EU approved until 10.07.2026 Mileage: 95,000 km Transmission: Automatic Suspension: steel front, air rear Engine brake Full side opening Latest service performed at BOS, well maintained New tachograph approved for international transport Ihodpox S Uq Iofx Ahyst Tail lift, 2,000 kg Tires in good condition Internal length: approx. 6.3 m Internal width: approx. 2.46 m Internal height: approx. 2.3 m Air horns Euro 5, 310 hp Bunk Radio/CD Climate control / AC Ready for delivery Description: 2012 DAF CF75.310 4x2 box truck.Only 95,000 km.Full side opening with tail lift.Recently EU approved and extensively serviced at Bertel O. Steen. Km: 95000 HK: 310 Technical approved: Yes EU-approved until: 10.07.2026 Own weight: 10030 Total Weight: 20100 Payload: 9995 Width: 250 Length: 880 Inside width: 246 Inside lenght: 630 Inside hight: 230 Euro: 5 Model: 2012 DAF CF75.310 4x2 skapbil med full sideåpning. Kun 95 000 km! Gearbox: Automatic

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Ihedpfx Ahex Ip A Doyst Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic

Condition: used, machine/vehicle number: YF904UPVRB200xxxx, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 20298 Specifications: 2 axles Lift on 1 axle Good tires, 4 new autumn 24 and 4 others a little older Full side opening 6.70 internal length 3.26 internal height 2.52 internal width Ready for delivery Ihsdpew Thlyefx Ahyot Technical approved: Yes EU-approved until: 18.08.2026 Own weight: 5370 Total Weight: 20000 Payload: 14630 Width: 260 Length: 935 Model: Skapkjerre

Year of construction: 2015, condition: used, Serial number: TMG15URExxxx Please contact ATS Norway for more information Please provide reference number upon request: 21725 Specifications: 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Iedpfx Asxu A Htshyeht Boom 1: Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: 2015 Atlas Copco Boomer MC2 Tunnelborerigg.

Condition: used, machine/vehicle number: YV2A8A2C24A58xxxx, mileage: 530,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20300 Specifications: Ihedpfx Ahswi Rmaeyst Km: Approx. 530,000 Transmission: Manual Retarder Tires (see pictures) 6x2 Air suspension 2 years Radio/CD Air conditioning/AC Maintenance is done by owner Ready for delivery Description:Volvo FH16 6x2 truck with tipping hydraulics for semitrailer.Ready for delivery. Km: 530000 HK: 610 Technical approved: no EU-approved until: 27.02.2025 Own weight: 9340 Total Weight: 27000 Payload: 17585 Width: 255 Length: 665 Euro: 3 Model: 2004 Volvo FH16 6x2 Trekkvogn m/tipphydraulikk for tippsemi. Gearbox: Manual

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg Isdjwrt Tzjpfx Ahyoht

Condition: ready for operation (used), machine for expanding and reducing tubes Ihsdpfxewrt Tuj Ahyjt 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg