Used Biscuit Packing for sale (2,867)

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches Dksdpfx Ajvptt Rek Asw - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: used, A packaging machine is being sold. Dkodpfxjur N Nce Ak Aow The machine can pack goods in boxes or bags.

Condition: used, Mosca RO-TRP-4 automatic strapping machine Dkedpet Srxgofx Ak Aew Features: • Can be integrated into any line • Direct conveyor system with frequency control, adjustable from 0.15 – 0.8 m/s • IFM Ecomat 100 control unit with display • Hot-sealing system with electronic heating control • Fully automatic strapping tape threading system • Adjustable strapping distance via the control panel • Adjustable strap tension • Detection of the end of the tape with ejection of the remaining tape • Automatic ejection of the strapping loops in case of incorrect strapping • Structure painted blue – RAL 5010 The passage opening is 74 cm wide and 53 cm high. Strapping capacity: Up to 46 straps/min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 kVA Weight: 300 kg. You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details - Capacity: up to 60 packs per minute - Recently packed: - 3x4 cardboard - 4x6 cardboard - 0,5 L glass bottles - 0,33 L glass bottles Dedpjtq Dzhsfx Ak Askw - Other formats possible

Year of construction: 2024, condition: new, Hello. I have a semi-automatic packaging machine for bulk goods such as spices, flour, sugar, semolina, etc. for sale. The machine packs weights from 5g to 5kg with 1% accuracy. The packaging speed is 500 to 1000 bags or sachets per hour. The machine consists of: 1. a screw feeder that feeds the product into the packaging machine. Using a sensor, the feeder automatically fills the packaging machine's hopper. The hopper has a capacity of 45L. 2. a packaging machine Dsdpfxjtt Ip Io Ak Askw 3. a plastic bag sealer that seals the already packed bags. The machine's power requirement is 900W, 3-phase, 50Hz. The entire system weighs 150kg. Dimensions: 1000 x 650 x 2000 mm POSSIBILITY TO PACK PRODUCTS IN CANS OR JARS!!! PayPal payment available!!!

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Dksdpfjtylpiex Ak Aew

Condition: used, Year of construction: 2004, Used case packer APE INCA 2000 year 2004 The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Container Specifications The APE Impianti INCA 2000 bottling machine works with glass containers. This compatibility ensures both stability and durability during the bottling process. It supports 0.75- and 0.375-liter bottles, adding versatility for different product lines. Its precision meets the beverage sector’s standards, where filling uniformity and container integrity are crucial. Head Configuration and Structure Dedpfsvgvdysx Ak Aokw The machine uses 12  heads, which provide stability and consistency. The heads are arranged in two sets of 6 or one set of 12. This flexible configuration optimizes flow based on specific production needs. The modular structure also allows easy maintenance and replacement of heads without reducing productivity. Operational Orientation The operator side is located on the left, making control straightforward during monitoring and adjustment. This layout enables easy access to key components during routine operations and maintenance. The left-side position reduces intervention times and increases operator safety. Construction Material and Durability The INCA 2000’s stainless steel structure provides resistance to corrosion and offers structural stability. This feature also ensures hygienic safety, crucial in the food industry. Stainless steel minimizes the need for extraordinary interventions, which adds maintenance value and longevity. This choice of material meets the mechanical and chemical resistance required for intensive production. Conclusion of the Case Packer APE INCA 2000 The APE Impianti INCA 2000 bottling machine offers both efficiency and durability. It provides a speed of 6000 bottles per hour, compatibility with different glass formats, and a modular head structure. These features meet the challenges of modern bottling lines. Its stainless steel construction and ergonomic layout deliver efficiency, precision, and durability. For companies focused on quality and productivity, this machine is a valuable investment.

Condition: used, functionality: unexamined, Ferwood Code: RU0001320 - Manufacturer Code: CACR-SR03BE12G-E - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dksdpfxjv Du Nij Ak Ajw

Condition: like new (used), functionality: fully functional, mileage: 35 km, power: 9 kW (12.24 HP), fuel type: electric, gearing type: automatic, axle configuration: 2 axles, maximum load weight: 1,500 kg, number of seats: 9, Year of construction: 2019, operating hours: 6 h, Equipment: disability-friendly, power assisted steering, tail-lift, wheelchair accessible, Electric shuttle bus suitable for wheelchair users, with a wheelchair ramp at the rear, or for parcel delivery. Can be used on public roads without registration. The wheelchair ramp can be removed. Large cargo capacity, both in cubic meters and weight. Long range due to a dual battery pack. Dodpoz Ehbbefx Ak Ajkw This is a demonstration model with low mileage.

Condition: used, functionality: fully functional, Package stacking on a roller conveyor with vertical rollers for aligning and shaping the package. Strapping aid (frame, support for spacer wood, the plastic strapping is applied using a separate hand tool – not included). Transfer from roller conveyor to chain conveyor, transfer to a second chain conveyor before the cut-off saw. HOLTEC-Variocut saw with laser for positioning the cut. Removal of finished packages on the same chain conveyor. Dkjdpfs Aguvhox Ak Aew Complete disposal of cut-off wood and chips via a rubber conveyor belt running under the entire length of the system. Transfer/straightening on a HAAS vibratory feeder.

Condition: used, Board repacking line Djdpfx Akeykauzo Aokw Manufacturer: PlanSel/Nordautomation Pack chain conveyor Tilt hoist Board elevator Edge cutting system Measurement system Stacker with spacers Outfeed chain conveyor Boards till 6 m

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 30 %, color: blue, Equipment: ABS, tail-lift, General Information Year of manufacture: 2015 Dkodpfx Ajzulpkjk Asw Axle Configuration Tire size: 385/65R22.5 Rear axle 1: Tire tread: 30%; Reduction: single reduction Rear axle 2: Tire tread: 50%; Reduction: single reduction Rear axle 3: Tire tread: 40%; Reduction: single reduction Weights Unladen weight: 6,960 kg Payload: 34,040 kg GVW: 41,000 kg Functional Features Tail lift: DHOLLANDIA 2000 KG Sunroof: Yes Condition Damage: None = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, available from our location in 45891 Gelsenkirchen, is a set of two ULMA VTI 440 packaging machines. The packaging machines were manufactured in 2023, are used, and come from a business liquidation. Currently, the packaging machines are still connected to the power supply and can be inspected after scheduling an appointment. For technical data, please contact the manufacturer. Dkedpfx Akjz Izy Nj Aew Dismantling and loading are the responsibility of the buyer.

Year of construction: 2020, condition: ready for operation (used), Offered is an extensive machinery package for textile processing, automatic cutting, laser cutting, industrial sewing, die cutting and riveting. 1) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow rate: 320m³/h. 2) Single-needle lockstitch flatbed sewing machine with triple feed and large vertical-axis hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 3) Single-needle high-speed lockstitch sewing machine Juki DDL-9000B-SS, year of manufacture: 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 4) Single-needle high-speed lockstitch sewing machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control unit: AHE59. 5) Post-bed sewing machine Pfaff 591-900/81-BL. 6) 2 identical swing-arm cutting presses Moneus 1333. 7) Manually operated riveting and setting machine with mechanical foot actuation. Documentation available. Inspection possible by arrangement. Dsdpfxszt Skxs Ak Askw

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: VD 09.16.1408, WITH SHRINK TUNNEL Commission No.: 25.150.71 Equipment / Additional information: Sealing frame dimensions: approx. 800 x 600 mm Packaging capacity: up to 20 cycles/minute (depending on the product and operation) Film roll width: max. 750 mm (suitable for center-folded or flat film; film thickness approx. 12 µm to 80 µm) Clearance height: approx. 100 – 400 mm // Working height: approx. 870 – 970 mm Sealing technology: Impulse sealing system with a Teflon-coated cutting/sealing wire (odorless) Typical applications: Printed materials (books, magazines) Glass products in multipacks General consumer goods and industrial items requiring shrink-film protection Dksdpfo Ahng Njx Ak Aow

Condition: excellent (used), Year of construction: 2015, Optimize your packaging line with a reliable, fully automatic case erector from market-leading SOCO SYSTEM, capable of erecting and bottom-taping up to 18 boxes per minute. This is a compact and high-performance industrial case erector designed for integration into automated packaging and logistics processes. The machine automatically retrieves flat corrugated cardboard boxes from the motorized magazine, erects the box, folds the bottom flaps, and seals the bottom with tape – ready for immediate filling. The machine is controlled via a user-friendly touchscreen interface from Proface and is built with reliable industrial components, including a Siemens PLC and Festo pneumatics, ensuring maximum uptime and easy maintenance. This 2015 unit is in excellent condition and offers a cost-effective automation investment with a short payback period compared to the new price. With its right-hand outlet configuration, it is ideally suited as a starting point before manual packing stations or directly connected to automatic conveyor systems. Available for immediate delivery. Shipping costs are additional. Dksdpfs Ahg Ucex Ak Asw

Condition: used, machine/vehicle number: 008792, Position 1: Panel Feeding and Loading LCR-FLEXPACK Position 2: Roller Conveyors LCR-FLEXPACK Dsdpsz Nx E Hefx Ak Ajkw Position 3: Roller Conveyors LCR-FLEXPACK Position 4: Cardboard Closing Stations LCR-FLEXPACK Position 5: Robot LCR-FLEXPACK

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2017, loading space length: 13,640 mm, loading space width: 2,490 mm, loading space height: 3,050 mm, loading space volume: 104 m³, total length: 13,890 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50-R19.5, wheelbase: 9,010 mm, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lifting roof - Rear doors - Air suspension - Sliding roof - Drum brakes = Notes = 10/2017 KRONE Mega sliding curtain-sided trailer with BPW axles and drum brakes, ABS/EBS, hydraulically operated lifting roof (front and rear), sliding roof, rear doors, multi-locking system, 3 x 7-spar configuration, piggyback capability, internal dimensions: 13.64 x 2.49 x 2.90/3.00 m, unladen weight: 7,290 kg, permissible total weight: 39,000 kg, tires 435/50-R19.5 (L: 9/12/9 mm; H: 9/12/9 mm) = Further Information = General information Dksdpo Agnv Iefx Ak Aew Year of construction: 2017 Axle configuration Tire size: 435/50-R19.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread left: 55%; Tire tread right: 55% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 75%; Tire tread right: 75% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 55%; Tire tread right: 55% Weights Unladen weight: 7,290 kg Payload: 31,710 kg GVW: 39,000 kg Functional Body brand: Krone SD Sliding roof: Yes Condition Technical condition: good Optical condition: good Further information Please contact Arne Honingh for further information.

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Djdpfxjinwi He Ak Aekw Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, Equipment: documentation/manual, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging Dkjdpfjxlzr Asx Ak Aew - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: new, functionality: fully functional, Year of construction: 2024, The Rotection flow packaging machine is suitable for packaging various products. A big operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Dedpfxeq Ikhhe Ak Aekw Operating display: 10" touchscreen, can be swiveled using the extension arm for comfortable operator handling Drives: Servo Packing length: 900-450mm Packaging width: 35-200 mm (depending on film width) Packing height: 5-80 mm (depending on forming shoulder) Speed: 30-100 bags/min. in continuous operation Speed: up to 60 bags/min. Intermittently Film width: 90-400 mm Consumption: approx. 8 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 800 kg System dimensions: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate: < 5% Print mark sensor: Yes Winding shaft: fixation of the roll by hand without compressed air including roll stop for precise application Roller mount and guide: Overhead Printer holder: possible for an extra charge We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm Dkedpfx Aksyant Rj Aew – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: used, Year of construction: 2005, DEPACK 3 equipped with 3 heads at 4 x 3 Dksdpfxs Ahk Nis Ak Aow

Condition: used, Year of construction: 2002, 25 Cycles / min Dkodpfxj Ahlcyj Ak Ajw

Year of construction: 2013, condition: good (used), Ref. no.: 18592 Manufacturer: SEALPAC Type: Sealpac A5 Year of construction: 2013 Djdpjy Udgdsfx Ak Ajkw Further information: TECHNICAL DATA Feature Specification Manufacturer SEALPAC GmbH Model SEALPAC A5 Machine Type Tray Sealer / Schalenverschließanlage Serial Number A5-01-2661 Year of Manufacture 2013 Electrical Connection 3 x 400 / 230 V Frequency 50–60 Hz Installed Power max. 8 kW Machine Weight approx. 1,600 kg Control System Touchscreen control panel Construction Stainless steel Working Environment Cleanroom / Clean room Application Areas Medical / Food / Technical packaging SEALPAC A5 Tray Sealer Used – Excellent Condition – From Cleanroom Production Previously used for cleanroom packaging of medical and laboratory consumables, including pipette tip racks. This high-quality SEALPAC A5 tray sealing machine is designed for professional packaging applications where hygiene, reliability and process stability are essential. The machine was previously operated in a cleanroom environment, making it particularly suitable for medical, laboratory and sensitive packaging applications. Thanks to its stainless steel construction, compact design and user-friendly control system, the machine offers reliable and efficient production performance. As visible in the photos, the machine is in very clean and well-maintained condition. General Condition The machine is currently dismantled and stored. Visual condition is very clean and the machine was previously used in a professional production environment.