Used Boa for sale (10)

Condition: used, Year of construction: 2009, A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm C90M9Le Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil tank 1,850 L SPS controller Siemens S 7 Operating panel SiemensToughscreen Multi Panel Transport dimensions baler approx 12.741 x 2.400 x 3.360 mm (l x w x h) Machine weight baler approx. 50 tons Technical data for the conveyor belt Manufacturer BOA Type 1700 HBS 32° KTH 11000 x 13076 x 1500 Year of construction 2009 Drive power 11 kW Variable belt speed Feed conveyor length 11,000 mm Length of ascending belt 13,076 mm Pitch 32° Useful width 1,700 mm Height of side wall of infeed conveyor, inside 800 mm Height of side wall of ascending conveyor, inside 500 mm Pit dimensions to conveyor belt 14,616 x 3,550 / 2,150 x 1,750 mm (l x w x d) Comments: As you can see from the photos, this machine has some signs of wear that should be repaired and removed before it is used again. A basic maintenance and partial overhaul is recommended. The cylinder tube of the main hydraulic cylinder has a hairline crack and should definitely be replaced. The machine is expected to remain in single-shift operation until end of 2024 and will then be replaced by a new press with conveyor belt. An inspection of the machine during operation, including the use of materials, is possible by appointment. We accept no liability for the technical details or any errors.

Condition: like new (used), Vibrating bar screens / Bar sizer, Indicated below: Manufacturer - Type - Deck Size Kggloaw - 2 Pcs. Mogensen VX 2078 / 2.000 x 6.000mm - BOA KS 1,5 / 2,5 x 1 / 1.500 x 2.500mm - IFE SR 1250 x 3510 FSV / 1.250 x 3.510mm - Jöst / 600 x 2.000mm

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, Machine/vehicle number: 911005-01, Pressing force: 25 t, Filling opening width: 800 mm, Filling opening length: 800 mm, Bale length: 1,300 mm, Total length: 6,000 mm, Bale height: 800 mm, Bale width: 800 mm, Overall weight: 6,500 kg, Power: 17.5 kW (23.79 HP), The press was barely in operation. Dpnvuh

Condition: used, Functionality: fully functional, Bale weight: 500 kg, For pressing paper, foil, bigbag and other types of materials. After overhaul. Cft9Fyo0Cw Pressed euro bales weighing 500-600kg. Inspection and test by appointment.

Year of construction: 2002, Condition: used, BOA Recycling Equipment Paper Cardboard Hogger with Chain Conveyor. Year: 2002 Coming complete with it's own infeed chain conveyor All in good condition and ideal for hogging newspaper, books, pamphlets, leaflets and most other paper and card based products Ot238Atkdt Can be viewed and the machine is ready to go straight to work. For more information or to arrange a viewing, please in touch.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: C20 -Width: 120 mm -Nominal pressure: PN16 -Dimensions: 120/106/H207 mm -Weight: 3.7 kg Bp7E2Bzy

Condition: used, Year of construction: 2021, Operating hours: 2,658 h, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Dozevx Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Manufacturer: BOA Type: KS 1,5 x 2,5 x 1 Size: 1.500 mm x 2.500 mm Bypcu397Gb Electrical Motor: 11 kW/6 Mach. No.: OR 327 Year of manufacture: 1990 Springs included. Can be sandblasted and painted.

Condition: excellent (used), Year of construction: 1991, Baler BOA 45 K Baler BOA 45 K Bhkxsrnvrcw 1 Description, Technical data baler: Manufacturer BOA Type 45 K Year of construction 1991/ 2013 completely overhauled and renewed the PLC Press power main press 70 tons Feed channel 1,500 x 1,000 mm Volume press space 1,7 m³ Theoretic cycle time 18 seconds Bale size 700 x 1,150 mm, length variable Driving motor 2 x 18,5 kW Connected load 60 kW Tying system 4-fold vertical, 2-fold horizontal, fully automatic Throughput rate 6 up to 10 tons/hour, depends on material Bale weight 500 up to 600 kg, depends on material PLC Unitronics EX-D16A3-T016 Volume hydraulic oil tank 800 l Transport dimensions only baler 9,800 x 2,250 x 3,200 mm (l x w x h) Machine weight baler approx. 18 tons Condition: The press was completely overhauled in 2013, provided with a new PLC and is in a good condition. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2007, Operating hours: 8,590 h, Machine/vehicle number: V300397 - 10, Machine type : BOA Continette II Machine number : V300397 - 10 Norm :according CE Machinery Directive and AS 3000 Surface treatment : RAL 5015 Voltage : 240-415 Volt / 50 Hz E-motor hydraulic pump : 22 kW Protection class : IP 55 Insulation class : F Total weight : ± 9000 kg Main dimensions (lxwxh) : 6415x2665x3034 Cevclysqfa Channel dimensions (lxwxh) : 2030x1000x720 Filling hopper dimensions (lxw): 1200x730 Bale dimensions (lxwxh) : variable*800*730 Pressure force (max. 280 bar) : 882 kN Specific pressure : 43 ton Contents hydraulic aggregate : 800 litre Hydraulic oil specification : Shell Tellus TD 46 Max. pressure : 280 bar Number of cylinders : 3 Hydromat type (vertical) : H 160-4 Number of binding wires : 4 PLC : Siemens Simatic CPU S7 Operation terminal : Touch screen Siemens Sound-pressure level : 75-86 dB(A) 6th of July was baler exchanged and not used Spare parts: wire lances, twist fingers, hydraulic valves, ram hydraulic cylinder, hydraulic pump, PLC modules, touch screen