Bale press

BOA D130 A 110KW

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Pgedpev U R Agsfx Afust Fully rebuilt and revised in 2019

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Pjdpfx Afornnt Iousgt Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Podpfxoqa Dv Te Afusgt Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Year of construction: 2016, condition: repair required (used), functionality: not functional, HS 800 basic package Podpfjvm Uqrox Afuegt Spiral shaft screen deck AA209-150 Special paint finish: Green

Year of construction: 2022, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, Waste Recovery and Sorting Line – Year 2022 Complete line for the recovery and sorting of municipal and industrial waste, manufactured and installed in 2022, with very few operating hours and in very good overall condition. The installation is equipped with leading European brands, including: • PICVISA – ECOPACK EP-2000 and EP-1500 optical separators • NIHOT – WSF 800 and SDS 800 air density separation systems • SPALECK – Vibratory screen • GUNTER – SPLITTER UNIT 425 screening and separation • SPR – 1-rotor Pre-crusher shredder • FELEMAMG – Magnetic and inductive separators • ATLAS COPCO – GA37 VSD FF compressor Pgedey Snntspfx Afust • Large number of conveyor belts and feeding/storage silos Approximate operating hours range from 1,000 to 2,500 per unit, with the majority of components maintaining excellent operational condition. The facility can be purchased: • As a complete line, • As separate sections, • As individual units. This is a modern facility, equipped with high-performance optical sorting and air density separation technology, specifically suited for: • MSW (Municipal Solid Waste), • Packaging, • RDF/SRF, • Plastics, • Film, • Paper, and light waste recovery.

Condition: excellent (used), Year of construction: 2024, operating hours: 5,400 h, functionality: fully functional, A scrap shear (Lefort Trax 650) in excellent condition is for sale. Podpjz Ak Dvjfx Afujgt Viewings can be arranged by appointment. The machine is available immediately.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Pgjdovy Aipepfx Afuet Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2009, condition: used, Two-color rotary flexographic printing press with integrated slotter and stacker. TECHNICAL DATA: Year of manufacture: 2009 Serial number: 0904K02 Max. speed: 70 sheets/min Economic speed: 50 sheets/min Max. sheet size: 3000 x 2000 mm Min. sheet size: 600 x 350 mm Max. print area: 2900 x 1900 mm Pjdpfxohbvq Hs Afusgt Board thickness: 2-10 mm Plate thickness: 4-7 mm Axial adjustment: ± 8 mm Max. slot length: 350 mm Slot width: 7 mm Main motor: 7.5 kW Total power: 15 kW Dimensions: 6000 mm x 3050 mm x 1900 mm Weight: 28000 kg DESCRIPTION: The price includes commissioning, technology transfer, training, and start-up warranty.

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Pgjdoxtmyzopfx Afust Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Located: Europe Western Current State: In production Available: Psdpsyzyhwsfx Afusgt Immediately More pictures and video is available. PRICE under request.