Bomag bpr 25 50 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
2
output:5,8 kw Year:1997 weight:485 kg dimensions of the machine ca.:0,9 x 0,6 x 1,4 m Lqvks7ab more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. U0tcu7lx GEBRUDER WEISS KG - 250 HP, Three-pass Fire Tube/ Water Tube Boiler with Biomass Burner and the following additional features• National Board #[...]• Steam Lbs• Design pressure……….200 PSI• Heating Surface……….1,076 [...] -- Fuel composition: Green or dry chips, sawdust, edgin... more
1
Elect./Voltage: 8zawv0v78 WYSONG & MILES MTH-250-144 Hydraulic Press Brake -- Tonnage Capacity 250 Tons -- Overall Length of Bed and Ram 144"" (12' 0"") -- Distance Between Housings 126"" (10' 6"")÷ Stroke Length 10"" -- Open Height 19"" -- Closed Height 9"" -- Depth of Throat (Gap) 10"" -- Distance Floor to Top of Bed 34"" -- Speeds Approach 250"" / Min.- Bend 8"" – 20"" / Min.- Return: 200"" / Min. -- Motor 20 HP 3/60 -- Overall Dimensions (Approx.)152"" x 76"" ... more
1
Elect./Voltage: Bbiuy8nih2 DOOSAN DAEWOO PUMA 2500 LSY Multi Axis Mill & Turn Center -- Swing over bed 23.6"". -- Swing over carriage 21.6"". -- Maximum bar capacity 3"". -- Maximum turning diameter (main spindle) 13"". -- Distance between main & sub spindle nose 43.7"". -- Main spindle chuck size 10"". -- Spindle speed 35 - 3500 RPM. -- Spindle bore diameter 3.4"". -- Spindle motor 30 HP. -- Maximum spindle torque 319 ft/lb. -- Main spindle C-Axis. -- Rapid traverse rate: 2... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 9s3omsppm HTC 250-10a Hydraulic Power Squaring Shear -- Cutting capacity mild steel 1/4"" x 10'. -- Overall cutting width 124”. -- Number of holddowns 9. -- Speed at half width 32 SPM. -- Speed at full width 25 SPM. -- Motor 15 hp 3/60. -- Overall dimensions (approx.) 144"" l-r x 80"" f-b x 90"" h. -- Weight (est.) 15,400 [...] with: -- 36” front operated power back gauges with readout. -- Electric foot switch operation. -- 78"" squari... more
1
Elect./Voltage: J3eqgzmz Doosan PUMA 2500LSY Turning Center -- Max. swing over bed 23.6"". -- Max. swing over carriage 21.6"". -- Max. turning diameter 13.0"". -- Max. cutting length 29.5"". -- X-Axis travel 9.8"". -- Z-Axis travel 32.6"". -- Y-Axis travel 2"". -- X-Axis rapid traverse rate 945 IPM. -- Z-Axis rapid traverse rate 1181 IPM. -- Main spindle speed 3,500 RPM. -- Main spindle motor 25 HP. -- Main spindle nose A2-8. -- Main spindle bar capacity 2.99"" (76 mm). -- Main... more
1
Elect./Voltage: 3dkwmdajj CINCINNATI AVENGER 250C CNC LATHESpecifications: --Control Acramatic 850SX Control --Max Swing Bed 23.54"" --Max Turning Dia 10.56"" --Max Turning Length 19.79"" --Bar Capacity 2.56"" --Spindle Nose A2-6 --Spindle Speeds 4,000 RPM --Spindle Motor 30 HP -- Turret Positions 10 --Rapid Traverse (X & Z) 787 IPMEquipped With: --Acramatic 850SX Control --10"" Chuck --(6) [...] Tool Holders --(6) [...] Tool Holders --Chip Conveyor --All Availab... more
1
Elect./Voltage: Vdd89ez DAEWOO ""PUMA 2500SY"" CNC TURNING CENTER -- Swing Over Bed: 23.6"" -- Swing Over Carriage: 21.7"" -- Max. Turning Length: 19.7"" -- Spindle Nose: A2-8 -- Spindle Bore Dia.: 3.5"" -- Spindle Speed: 3,500 RPM -- Main Motor: 29.5 HP -- Max. Bar Capacity: 3"" -- Chuck Size: 10"" -- C-Axis Indexing: .001 Degree -- X-Axis Travel: 9.8"" -- Z-Axis Travel: 22.8"" -- Y-Axis Travel: +/- 2"" -- Rapid Traverse (X, Z): 788 IPM, 945 IPM -- ... more
1
Elect./Voltage: 200/230 Volt, 60cy,3Ph Fb7vxs9 DAEWOO Puma 2500LSY GL Turning Center -- Fanuc 18i-TB CNC Control -- Chuck main spindle 10"" 3 jaw -- Chuck Sub-spindle 6"" 3 jaw -- Max swing over bed 23.6"" -- Max swing over cross slide 21.6"" -- Max turning diameter 13"" -- Main spindle speed 3500 RPM -- Sub-spindle speed 6000 RPM -- Main spindle drive 30HP -- Sub-spindle drive 10HP -- Main spindle orientation .001 degree -- Sub-spindle orientation .001 degree -- Max turning leng... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. S3mkicb9 TIMESAVERS 252-1 IC Single-Head Wide Belt Sander: --51"" width cap. Combination Head --Head Configuration --1st Head: Combination head with 9-1/2"" Dia. rubber covered contact roll (55-60 duro) and a 4"" wide electronically controlled segmented finishing platen for fine veneer sanding, 30HP-40 HP motor. --Specifications: -- Belt Size – 52″ x 75, Conveyor Belt Size – 52″ -- 14″ min. part length. Work Height Adj... more


bomag bpr ...
every day

New machines via email!

Be informed!
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Ing9pch ACCURSHEAR 825012 Hydro Mechanical Shear Specifications: -- Capacity 1/4”. -- Maximum cutting length 12’. -- Throat depth 12”. -- Rake angle 1/4” per foot. -- Gap adjustment manual quick set. -- Strokes per minute 14 full strokes 45 short strokes. -- Number of holddowns 19. -- Hold down force 14 tons. -- Blade size 1” x 3” x 148”. -- Backgauge range 36” with auto swing up. -- Main motor ... more
1
Elect./Voltage: 9ky3pqtqo ACCURSHEAR 825010 Hydraulic ShearSpecifications -- Cutting length 10' -- Cutting capacity 1/4"" mild steel -- Knife size 1x3 -- Knife length 124"" -- # of holddowns 11 -- Cycles per minute full stroke 16 -- Cycles per minute short stroke 45 -- Motor hp 20 -- Approx weight 19,000 [...] with -- Front support arms -- Front squaring arm -- Front operated power backgauge programmable with DRO more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dt99stfh TIMESAVER 252-310 Wide Belt Sander (3) Heads --51"" width cap.; Cross-Belt - Combination Head & Platen. -- Head Configuration --1st Head: Cross-belt with segmented electronicaly controlled air actuated polishing platen, 25 HP motor. --2nd Head: Combination head with 9-1/2"" dia. rubber covered contact roll & 2-3/4"" wide segmented electronically controlled air actuated polishing platen, 2-3/4"" wide, 50 HP motor. -- 3rd Head: Segmented, elec... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Lc3i9dzz SAVI HFK-260S Veneer Guillotine with Max distance fr knife 50"". -- General Specs: 102.4"""" (2600 mm) Width cap., 4"" daylight opening, hydraulically operated knife, 4 HP hydraulic unit with reservoir, motorized parallel fence with 0.5 HP two speed gearmotor drive, push button operated, adjustable from 1"" - 50"" with magnified tape reader in front of machine. -- Equipped with: 2nd Cut feature with automatic reset, laser guide line light, photo... more
1
Elect./Voltage: Fxldsyx3y Hardinge GS-250MSY Turning Center -- Swing 24.4"" (620 mm). -- Turning diameter 15"" (620 mm). -- Center distance 21.3"" (541 mm). -- Bar capacity 3"" (76 mm). -- X-Axis travel 8.6"" (218 mm). -- Z-Axis travel 23.6"" (599 mm). -- Y-Axis travel +/- 2"". -- C-Axis indexing 0.001° -- C2-Axis indexing 0.001° -- Rapid traverse rate 1,181 IPM. -- Spindle nose A2-8. -- Subspindle nose A2-5. -- Spindle motor 30 HP. -- Subspindle motor 20 HP. -- Spindle speed... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. F9rc9mkt0 MORI SEIKI NLX 2500SY / 700 CNC Multi Tasking Turning Center w/Barfeed -- Maximum swing of work piece 29.21"". -- Maximum turning length 27.76"". -- X-Axis travel 10.24"" . -- Y-Axis travel +/- 2.0''. -- Z-Axis travel 31.3"". -- C-Axis travel main / sub .001°. -- Spindle speeds No 1, No 2 4000 / 6000 RPM. -- Spindle nose No 1, No 2 A2-8 / A2-5 . -- Bar work capacity No. 1, No 2 3.1""/1.6''. -- Main spindle motor 25 HP. -- Sub spindle mo... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. 9x8vvd8lx NAKAMURA-TOME WT-250MMY CNC Turning Center w/ Gantry Loader and Stacker -- Maximum swing diameter 15.5'' -- Swing over saddle 9.84"" -- Maximum turning length 17.12"" -- Turning diameter chucking 15.35"" -- Turning diameter over saddle 9.84"" -- Distance between spindles 9.84"" (min) / 34.25"" (max) -- Spindle nose thru hole diameter (1& 2) A2-6'' - 3.15'' / A2-5"" - 2.46"" -- Bar capacity (1& 2) 2"" w/ 8"" chuck / 2.5""... more
1
Elect./Voltage: Bbiqwnkicf Mazak SQT 250-MY Turning Center -- Max. swing 20.67"". -- Max. machining diameter 11.81"". -- Max. cutting length 19.6"". -- X-Axis travel 7.125"". -- Z-Axis travel 22.75"". -- Y-Axis travel 2"". -- Spindle speed 4,000 RPM (stepless). -- Spindle nose A2-6. -- Spindle bore 2.99"". -- Spindle motor 20/25 HP -- Turret tool capacity 12 positions. -- Rapid traverse rate (X&Z, Y, C) 1181 IPM, 472 IPM, 400 RPM. -- Rotary tool speed 25-4500 RPM. -- Tailstock... more
1
Elect./Voltage: E8t8pnauc 2013 KA SHUN 7250 WT CNC Lathe With C-Axis And Live ToolingSPECIFICATIONS: -- Chuck Type (Standard) Quick Change Collet Type -- TravelsX1 / X2 Axes 15.75″Z1 / Z2 Axes 7.87″ -- Max. Spindle Speed 4500 RPM -- Max. Milling Speed 6000 RPM -- Rapid Traverse 590 IPM -- Clamping Range 1.97″ -- No. of Turrets 2 -- Main Spindle Motor 25 HP -- Servo Spindle Motor 2.3 HP -- Live Tooling Motor 5 HP -- Approx. Overall Dimensions 126″ x 75″... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Eowwshuhk MORI SEIKI ZL-25B/500 4-Axis CNC LatheSpecifications: -- Swing Over Bed 20.5"" -- Swing Over Cross Slide 13.8"" -- Between Centers 25.4"" -- Max Machining Diameter 10.2"" -- X-Axis Travel Upper/Lower 6.3""/5.7"" -- Z-Axis Travel Upper/Lower 23.2""/23.2"" -- Spindle Speed 35 - 3,500 RPM -- Hole Thru Spindle 3.1"" -- Spindle Nose A2-6 -- Tool Capacity Upper 10 Tools -- Tool Capacity Lower 8 Tools -- Quill Stroke 3.1"" -- Tailstock Quill ... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Foezpri Mori Seiki SL-25B /500 CNC Lathe -- Swing over bed 20.4"". -- Swing over cross slide 13.7"". -- Max turning diameter 13.7"". -- Max turning length 20"". -- X-Azis travels 23.6"". -- Z-Axis travels 6.3"". -- Spindle speed 35 - 3,500 RPM. -- Spindle Motor 20 HP. -- Spindle sore / bar capacity 3.03"" / 2.5"". -- Spindle nose A2-8. -- Turret stations 10 station. -- Tailstock quill stroke 3.1"". -- Tailstock quill diameter 3.3"".Equipped Wi... more
1
Elect./Voltage: 220/480/3/60 9dciq98a7 OKUMA LU45-1250 CNC 4-Axis Turning Center -- CNC control OSP-U100L -- Swing over bed 33"" -- Max. turning diameter XA/XB 23""/18” -- Center distance 1250mm -- Travels, Z axis 1250mm -- X-axis 26"" -- Turret stations 10 upper/8 lower -- Spindle nose A2-11 -- Spindle speed 31-900 rpm. -- Rapids, Z/X 393/196 IPM -- Feed rates 0.00001---39.37 IPM -- Quill diameter 5.12"", MT No. 5 -- Main motor (Cont./30 Min) 50 HP / 60 HP -- Dimensions, ... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbfluisk9b HOLZMA HPP 250 Front Load Automatic Panel Saw: 149.6"" (3,800 mm) Cutting length & pull-back; 2.8"" (72 mm) saw blade [...]: -- 10 HP (7.5 kW) - 4,700 RPM Main saw motor, 350 mm main saw dia; -- 1.5 HP (1.1 kW) - 5,100 RPM scoring motors, 200 mm scoring saw dia.; NC controlled scoring saw adjustment from ""CADMATIC"" [...] carriage: Variable travel speed from 16 - 262 FPM (5 - 80 MPM), constant return of 262 FPM (80 MPM).Pusher Fence: -- Ele... more
1
Elect./Voltage: Vuvsjtlh Minster E2H-250-120 “Hevi-Stamper” -- Press Specifications: -- Force × Distance off Bottom: [...] ton × 0.236 in wo/ ASM -- Crankshaft Extension Location: [...] -- Drive Arrangement: [...] Twin-End -- Drive Location: [...] Drive -- Lube Unit Location: [...] Leg -- Approximate Press Weight: [...] lb -- Scale and Display Units: [...] -- Shop Air Pressure, Minimum: [...] psi -- Press Slide Specifications: -- Stroke Length: [...] in -- ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Sshgmo DIMTER PROFIPRESS L2500HF RF Press with Automated Infeed -- Press area (bed size) 100"" x 48"" with Pressing time from approx. 1 Min depending on wood and type of glue. Panel lengths 16"" - 100"", Panel width max. 48"" and panel thickness 0.5""- 3.25"". -- Generator: 20 kW RF Generator with average press time approx. (1) minute. -- Hydraulic Raise & Lower of Top Platen via (2) two Jack-Screws. -- Pusher: Multi-Functional Pusher driven By 3/4 HP Mo... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. U0f2wl2 AZO High Pressure Blower System with Feeder and 30 HP Drive. Arranged to pull material out of a hammer mill and blow it to another location complete with the following features and components: -- AZO Blower - Positive Displacement, Lobe Type. -- SIEMENS Main Drive 30 HP Motor. -- Draws a negative on the hammer mill and dumps material into the Blower Feeder - Quad Multi-Clone Receiver. -- Comes with a PLC but the current owner simply bypassed tha... more
1
Elect./Voltage: M3tgh OKAMOTO OGM 250-8.20 UDX CYLINDRICAL GRINDER -- Swing Over Table: 8.66"" / 220 mm -- Distance Between Centers: 19.68"" -- Maximum Diameter to be Ground: 7.87"" -- Maximum Weight Between Centers: 132 [...] WHEELHEAD: -- Grinding Wheel: 12"" OD x 1"" Wide x 5"" Bore -- X-Axis Head Infeed Travel: 8"" -- Swivel Angle: ± 30° -- Least Travel Increment: 0.0001"" -- Automatic Rough Feed: 0 to 0.0015"" (11 Stages) -- Automatic Fine Feed: 0 to 0.0001"... more
1
Elect./Voltage: Cducr8hlo 8"" x 20"" OKAMOTO UNIVERSAL CYLINDRICAL GRINDER OGM250-8.20UDXPreliminary Specifications -- Dimensions Converted From Millimeters -- Swing Over Table: 8.6"" -- Distance Between Centers: 19.84"" -- Maximum Diameter To Be Ground: 7.87"" -- (3) Workhead Speeds: 150/250/400 RPM -- Grinding Spindle Motor: 2 HP -- Grinding Wheel Size: 12"" Dia. x 1"" Wide x 5"" Bore -- Workhead Taper: #3 Morse -- Manual TailstockEQUIPPED WITH: -- Swing Down Internal Spindle -- ... more
4
2015 Dynapac 250 Roller - 10000127T0E002594 Bbgibrfx0m This machine will be sold by Euro Auctions at an unreserved auction in Dubai, UAE, on the 5th March 2018. For more information contact our head office. more
6
M8wyxErfurt C frame 250ton  mechanical power press Adjustable stroke Total weight 18ton Max pressure 250ton Working way before bottom position of ram at max pressure 10,7mm Pressure at fully drawing depth 125 mp Number of strokesat idle running stroke of ram 50min Stroke of Ram 40 160mm Adjustment of Ram 110mm Counter pressure of cushion 16ton 6kp/m Can also quote for new c and h frame presses more
6
Sanding width : 2550 mm Twin cross belt, each with 18,5 kW motor, 1500 rpm Single belt speed Each belt with pneumatic pressure beam Feed by parallel carpet strips, variable feed speed Etjeuh8 Motorised height adj. of the table more
6
Type of fuel: Diesel Field of application: Construction Ufrsygrd Power: 246 kW (335 HP) Make of engine: international GCB 330 Delivery terms: FCA more
3

Generator set Iveco 250 kva

Apeldoorn, Niederlande Netherlands
6295 km
2000
used
Type of fuel: Diesel Make of engine: Iveco 8210SRI2500 Mosgd Transport dimensions (LxWxH): 410x160x200 c more
3
Nr332gdimensions appr. 2,90 x 1,25 x 0,65 mm weight appr. 4 tons with 22 t-slots more
6
x-travel 8000 mm y-travel 2500 mm workpiece height 2360 mm table width 2240 mm table length 10100 mm weight of the machine ca. 110 t dimensions of the machine ca. 20x8,5x5,2 m M3d28q89f more
5
cutting diameter 250 mm band length 400 mm engine output 1,5 kW 32cmn2e0m weight of the machine ca. 150 kg. range L-W-H 700 x 1.200 x 1.200 mm more
5
Electric motor, three-phase motor input 415 Volt Power 55 KW speed 2950 RPM shaft diameter 60 mm type B5 Protection class IP54 dimensions 930/600/H610 mm Weight 380 kg Ehb2rm7 more
4
Electrodes of 3,25 x 350 Hiujypn38 Type AWS: E 6013 Analysis C 0.07, SI 0.2, MN 0.5% Price per package -23 packages available Weight per package 4.3 kg more
5
Hydraulic cylinder, vertical Moovable cylinder, hydraulic stamp, printing stamp Piston diameter 38 mm Piston rod 16 mm stroke 500 mm-Gesamtlänge 710 mm retracted Extended-Gesamtlänge 1170 mm Recording piston rod thread Price per piece -4 x vorhanden Qldvmfpja Mmmm dimensions 700/80/H80 Weight 4.3 kg more
4
Heavy duty casters, heavy load wheel, tires -Traglast 1,000 kg -Ball bearings Tyre size 250 x 60 mm Plate 140 x 175 mm Total height 305 mm -9 x wheels available Award pieces Weight 7 kg / piece Dvgdpwz more
4
Mounting plate with T slots plate field welding table welding table T-slot plate Plattenbohrwerk Intermediate plate for hydraulic press with eccentric press Width 1630 mm Length 1250 mm Height 100 mm Plate is solid Qlvr3igzb -Keyway width 22 mm Weight approx. 1000 kg more
6
Dimensions (l x w x h) approx.: 2300 x 1100 x 2500 mm Weight approx.: 1450 kg Description: KUKA KR 125 / 150 - 6 axis robot [...] Head ZH Blxamk2g KRC 1 system equipped with the last update, Software environment in KRC 2- style images are representative the robot is re-painted and cabinet adjusted to reference points, SET with new batteries - and a final operation test. more
6
Dimensions (l x w x h) approx.: 2300 x 1100 x 2500 mm Weight approx.: 1450 kg Description: KUKA KR 125 / 150 - 6 axis robot [...] Head ZH KRC 1 system equipped with the last update, 28erusq2z Software environment in KRC 2- style images are representative the robot is re-painted and cabinet adjusted to reference points, SET with new batteries - and a final operation test. more


bomag bpr ...
every day

New machines via email!

Be informed!

to

to

Change search
BOMAG BPR 25 50
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close