Bomag bt 65 4 buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Infranor EL 86 map LK1077700044 + card BTS 13659 00 033 from Schiess Nassovia expanded machine, used good condition, 100% functional, included with com. photos Ehdnfjn more
5
Vibration plate, vibration plate, Shaker Working width 670 mm Operating weight kg 575 Motor power 10 kW Electric start Front and reverse -with HATZ engine Dimensions-1070/670/H1450 mm M3v0j Weight kg 575 more
6
WINTEC MV 50 FMC with Bt 50 - Make : WINTEC - Typ : MV 50 FMC - No. : 116169 - Age : 1995 NOV - Capacity – Travel - X - Travel : 1.050 - Y - Travel : 560 - Z - Travel : 650 - Table – spindle : 750 - Double pallet table - Length : 1.400 - Width : 550 - Load : 700 - Rapid X/Y/Z: 24.000 Dvxa73 - Spindle : Bt 50 - Speeds : 3200 Rpm - Power : kW 15 / 18.5 kW - Dimensions: - Length : 6.040 - Width : 4.160 - Height : 3.395 - Weight : 10.000 Kg - ATC 30 Positions - FANUC O-M - Chip conveyor... more
6
Diameter of work-piece: 60mm - 90mm Length of work-piece: 130mm - 300mm Capacity: 1650kg/ hour Vjjntvqzo Energy consumption: 364 kWh/ ton Final temperature: 1250°C Min. cycle time: 5 sec. Heating station: 800/ 650kW 1000/ 900V 2000Hz Induction heater is equipped with an ABB transformer with 800kVA Induction heater is equipped with cooling system Induction heater is equipped with coil changing system (left/ right) Induction heater is equipped with 3 coils with the following specifications: 1.) ... more
2
Device in new condition! Bpxztsyuo Nilfisk Alto scrubbing suction machine Scrubtec 653 BC 9087187020 3510132302137f13 integrated Ladegeraet76cm working width sucking 53 cm working width variable brush pressure SchluesselschalterFrischwasseranzeigeautomatik WasserstoppWasserdosierunggraue brush not distinctive wheels without drive specifications: working width mm / "530 / 21" brush diameter mm / "/ St. 530 / 21 ' / 1Saugfussbreite mm 760 theoretical area output m²/h 2120Frisch-and waste water... more
6
Infranor EL 86 map LK1077700044 + card BTS 13659 00 033 from Schiess Nassovia expanded machine, used good condition, 100% functional, included with com. photos Ptfvvm more
1
Device in new condition! 9087189020 36073123200 H 07 Scrubtec 653 BL with drive and charger / brush / vacuum bar the SCRUBTEC 653 is the first choice for demanding cleaning tasks. Also noise level, etc. offers you a number of benefits, such as compactness, easy to use, extremely low • 55 l tank volume (fresh / dirty water tank) • Automatic brush and water stop • Exclusive break - away suction base • Adjustable brush pressure for optimum adaptation to all conditions • Drive ... more
2
output:3 kw Year:1997 weight:73 kg Czikyjma dimensions of the machine ca.:0,45 x 0,75 x 1000 m more
6
Vehicle data - make: BT - type: LCU 160 (265 hours) - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2014 - operating hours: 265 - internal No.: 13532 _ _____ Mast data - mast type:-lifting height: 0 mm - height: 0 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ M3b97 Dimensions - length: 0 mm - width: 0 mm - height: 0 mm - weight: 0 kg _ Battery & charger - battery voltage: 0 V - battery AH: 0 Ah - ... more
6
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY^^^ WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC 650MM CENTRE DISTANCE x 175MM HEIGHT, EXTERNAL WHEEL 500MM, ACTIVE LENGTH POSITIONING, MOVOMATIC IN PROCESS GAUGE READY, ELECTRONIC WHEEL BALANCING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 21i T. GRINDING MACHINES FOR RENT..... *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** WE BUY/SEL... more


bomag bt 6...
every day

New machines via email!

Be informed!
5
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Battery: 180 Ah 24 V Year of manufacture 2017 Encgjsj Lift height: 21 cm NEW battery 2PzS 180Ah, 220V charger, Forksize 1150 x 550 mm, Reconditioned lifting system, Tyres: Vulkollan more
5
Butterfly valve, butterfly valve, ball valve, butterfly valve, globe valve-less drive connector DN65 Nominal pressure PN16-width 100 mm stainless steel Weight 3.3 kg G7pqp8x more
6
Vehicle data - make: BT - type: PES 160 L / / / HH 2900 mm / lifting capacity 1600 kg - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 2900 mm - range: 0 mm - year: 2011 - operating hours: 0 - internal No.: C0402 _ _____ Mast data - mast type: standard - height: 2900 mm - height: 1990 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ 9q0hx2unh Dimensions - length: 0 mm - width: 0 mm - height: 1990 mm - w... more
5
turning diameter:200 mm turning length:500 mm control:SIEMENS 840 C spindle hollow:65 mm Main spindle capacity:21 kW speeds station 1:25 - 4500 U/min speeds station 2:40 - 5000 U/min tool turret:1: 8 - fach - 4 angetrieben tool turret:2: 8 - fach - 4 angetrieben c-axis:programmierbar dimensions of the machine ca.:3,4 x 1,7 x 1,8 m weight of the machine ca.:5,9 t 920acwbrr more
6
greates pass round over bed 1470 mm turning length 6500 mm control Sinumerik 840 D SIEMENS Swing dia. over traverse guideway 1580 mm z-travel 6870 mm x-travel 1120 mm Zahlp9syb Main spindle: Max. rpm 1000 U/min power capacity - main spindel 90 kW max. Torque 10248 Nm spindle head B20 (DIN 55026) spindle diameter in front bearing 320 mm spindle bore 245 mm C-Axis 0,001 ° C-axis turning speed range 12,5 U/min Torque C-Axis max. 6.000 Nm Milling Spindle: turning speeds max. 3.200 U/min power c... more
6
Type of fuel: Electric W08otlcv Height: 130 cm Fork length: 1.150 mm Battery: 180 Ah 24 V Year of manufacture 2017 Lift height: 21 cm NEW battery 2PzS 180Ah 2017! 220V charger, Forksize 1150 x 550 mm, Refurbished lifting system, Tyres: Vulkollan more
3
Strainer, Flanschenschmutzfänger, filters, coarse or fine strainer connector DN65 Nominal pressure PN16-Width 290 mm Weight 16.8 kg Gtqykc more
6
Vehicle data - make: BT - type: PES 125 / / 440 STD / triplex / HH 5,400 mm / FH 1,930 mm - type of drive: electric - load capacity: 1250 kg - load Centre of gravity:-lifting height: 5400 mm - range: 0 mm - year: 2013 - operating hours: 440 - internal No.: C 0471 _ Mast data - mast type: triplex - lifting height: 5400 mm - height: 2350 mm - free lift: 1930 mm - carriage: 0 mm - forks: 1150 x 75 x 40 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2350 mm - weight: 1465 kg _ Baghhu... more
3
Bosch SM 10/20-TC 1 servo module 065668-104, serial number according to the photo, used, normal wear, 100% functional 9ffigzrvw more
6
turning diameter 200 mm turning length 635 mm control Siemens 840D powerline swing diameter 250 mm spindle distance 900 mm turning speeds 5000 U/min power capacity 37 kW weight of the machine ca. 10 t DMG-GILDEMEISTER 70yjudnuq Twin 65 RG2 V8 - 180 ° B-axis and Y-Achsefür eccentric drilling and milling operations, let be inclined holes, curved surfaces and complicated milling contours easy to prepare - NC-controlled, cross-traversable counter spindle for simultaneous, collision-free interio... more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Battery: 150 Ah 24 V Year of manufacture 2017 Eliibnaww Lift height: 21 cm NEW battery 2PzS 180Ah 2017! integrated 220V charger, Forksize 1150 x 520 mm, Refurbished lifting system, Tyres: Vulkollan more
3
Strainer, Flanschenschmutzfänger, filters, coarse or fine strainer connector DN65 Nominal pressure PN16-Width 290 mm Weight 12.6 kg Hiow8n8kg more
6
Vehicle data - make: BT - type: PES 160 L / / / HH 4800 mm / lifting capacity 1600 kg - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 4800 mm - range: 0 mm - year: 2014 - operating hours: 844 - internal No.: C0434 9920hlwbe _____ Mast data - mast type: triplex - lifting height: 4800 mm - height: 2180 mm - free lift: 1510 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - he... more
3
FANUC 20M engine from Hitachi Seiki machine, hole distance of the fixing holes: 141 x 141 mm, Ø shaft: 35 mm, used, normal wear, 100% functional, included with com. photos attention: Please separately request cost of packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Mzagr more
6
load capacity 1,225 kg lifting height 7,500 mm construction height / clearance 3,200 mm triplex mast free lift 2,700 mm 7wasrai2n operating hours 1,585 fork length 1,150 mm - fork carriage FEM 2 sideshift operating voltage 48 V with charging unit space requirements width - 1,400 x length without fork arms - 1,600 mm x height - 3,200 mm weight including battery approx. 3,400 kg more
6
used, good fully functioning condition of workshop resolution: 1 x George Hardy / WMW BT10 bench drill Year of construction: 1962 incl. Chuck Ø 13 mm Speed: 355 / 710 / 1000 / 2000 RPM Operating voltage 380 V Gvgekk Capacity: 0.45 / 0.6 of kW projection: 210 mm Quill stroke: 100 mm Table Lxw: 350 x 280 mm maximum distance from table / drill Chuck: 330 mm equipped with new cable and CEE plug 16A Space Lxwxh: 550 x 430 x 1150 mm more
6
Type of fuel: Electric Height: 287 cm Fork length: 800 mm Battery: 560 Ah 24 V Year of manufacture 2014 Lift height: 441 cm W02phs0l Orderpicker, Battery 24V 4PzS 560Ah 2014, Charger 220V or 380V, Reconditioned! Tyres: Vulkollan more
3
Butterfly valve, butterfly valve, ball valve, butterfly valve, globe valve, gate without drive connector DN65-Width 290 mm Nominal pressure PN16-weight 18.5 kg Gurnhfz more
6
Vehicle data - make: BT - type: SWE 120 L / / HH 2900 mm / initial lifting / duplex - drive type: electric - load capacity: 1200 kg - load Centre of gravity:-lifting height: 2900 mm - range: 0 mm - year: 2010 - hours of operation: 1167 - internal No.: C0470 _____ Mast data - mast type: duplex - lifting height: 2900 mm - height: 1935 mm - free lift: 1560 mm - carriage: 0 mm - forks: 1150 x 75 x 40 mm _ Wfdld0 Dimensions - length: 0 mm - width: 0 mm - he... more
5
EMod VKM64/23-90 type 3 ~ engine MOT.-No. 7885881, 0. 65kW 8450 rpm, used, good condition, 100% functional Sspb8o more
5
x-travel:650 mm y-travel:500 mm z-travel:500 mm table-size:850 x 600 mm turning speed range:1 - 18.000 U/min tool taper:SK 40 feeds::1 - 6000 mm/min rapid travel range:60 m/min milling spindle motor:10 / 15 kW control:HEIDENHAIN TNC 426/430 total power requirement: kW dimensions of the machine ca.:2,4 x 3,0 x 2,5 m weight of the machine ca.:9100 kg Iespctk more
6
IntNr.: 4929 * Device details: * Capacity: 1600 kg Lifting height: 6000 mm Free lift: 1790 mm Mast type: triplex mast height: 2460 mm Length/width/height: 1800 / 1670 / 2150 mm Operating weight: 3478 kg * Equipment: * * Protection umbrella 9phsp9hdh * 3rd valve * 4 valve * Full free lift * Attachments: * * Side-shift Free lift: 1,790 mm On request we take care of transport to you. Another 250-300 forklifts, attachments and sweepers for you available immediately. Als... more
6
Type of fuel: Electric Height: 130 cm M2ksh Fork length: 1.150 mm Battery: 180 Ah 24 V Year of manufacture 2012 Lift height: 70 cm Capacity lower forks 1600 kg, Capacity upper forks 800 kg, Forksize 1150 x 570 mm, Battery 2PzS 180Ah 2012, 220V charger, Refurbished lifting system! Tyres: Vulkollan more
3
Butterfly valve, butterfly valve, ball valve, butterfly valve, globe valve, gate without drive connector DN65-Width 290 mm Nominal pressure PN16-2x valves available-price-piece weight 19 kg / piece Qlpyz8bbu more
6
Vehicle data - brand: BT - type: PES 160 L / / triplex / HH 3,750 mm / FH 1,248 mm / initial lifting / 3.356 hours -Drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 3750 mm - range: 0 mm - year: 2008 - operating hours: 3356 - internal No.: C0477 _ Mast data - mast type: triplex - lifting height: 3750 mm - height: 1920 mm - free lift: 1248 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Bajgvp8j97 Dimensions - length: 0 mm - width: 0 mm - height: 1... more
6
EMod motor type VKM64/23-90 MOT.-No. 7885871, 0. 65kW 8450 RPM used good condition 100% functional Bqjbvurq more
1
max. wheel diameter:650 mm gear width:1 mm max. module:15 (22) min. module:1,5 number of teeth:10 - 200 min. gear diameter:90 mm Zahnschrägung max.:45 ° grinding slide stroke:490 mm grinding wheel diameter:200-280 mm grinding wheel - swivable:0-10 ° workpiece weight:30 - 50 -200 kg base circle dia. - max.:630 mm base circle dia. - min.:65 mm centre distance:413-621 mm feeds axial:0-2100 mm/min rapid traverse:4 m/min power capacity:8,5 kW weight of the machine ca.:8 t dimensions of the machine... more
6
Beam size: 0 mm Punching capacity: 0 kN Bztcneyi air pressure - required: 8 bar total power requirement: 14 kW machine weight ab.: 80-170/je Maschine kg space requirements approx. LxWxH: auf Anfrage m MULTIFUNCTION PUNCH PRESS for alloy windows construction 3 pieces: for Schüco alloy window frame,post and beam profiles S65 for Schüco alloy wing profiles for alloy window system ROYAL S 55, S 65 and S 70 for Schüco alloy door profiles Royal S65 door base profiles -foot operation - Pneumatic air ... more
6
Type of fuel: Electric Height: 215 cm Fork length: 1.150 mm Battery: 300 Ah 24 V Year of manufacture 2015 Lift height: 330 cm Forksize 1150 x 570 mm, Refurbished lifting system, Refurbished steering system, Battery 4PzB 300Ah 2015, 220V charger, Tyres: Vulkollan Eqbsb0t more
4
Strainer, Flanschenschmutzfänger, filters, coarse or fine strainer connector DN65 Nominal pressure PN16-width 290 mm 2x valves available-price-piece weight 17.6 kg Qlp9cgxgj more
6
Vehicle data - make: BT - type: RRE 160 E / / HH 8,500 mm / height indicator / Sideshift / 3 valve - actuator type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting: 8500 mm - range: 0 mm - year: 2013 - operating hours: 6422 - in internal No.: C0476 _ Mast data - mast type: triplex - lifting height: 8500 mm - height: 3600 mm - free lift: 2400 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Vsa92y Dimensions - length: 0 mm - width: 0 mm - height: 3600 mm - weight: 4175 kg... more
6
EMod motor type VKM64/23-90 MOT.-No. 7885868, 0. 65kW 8450 RPM used good condition 100% functional Qb8ql3fr more
6
turning diameter max. 650 mm turning length max. 790 mm control MORIC T5F turning diameter over bed 890 mm turning diameter over cross slideways 560 mm Dvya83 centre distance 900 mm Main spindle: turning speed range - main spindle 4 - 1.010 min/-1 power capacity - main spindel 37 / 30 kW max. Torque 3.870 Nm Number of speed ranges 2 spindle bearing diameter 240 mm spindle bore 168 mm max. bar capacity 144 mm usable bar diameter 120 mm spindle head JIS A2 -11 chucking diameter 610 mm turret... more
3
table length: 865 mm table width: 780 mm table height: 40 mm height over floor: ca. 815 mm weight of the machine approx.: 140 kg space requirements of the machine approx.: 0,87x0,8x0,82 m S8ysztm9i surface plate with 3 base stands more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm 9ul87bpg0 Battery: 180 Ah 24 V Year of manufacture 2017 Lift height: 21 cm NEW battery 2PzS 180Ah, 220V charger, Refurbished lifting system, Forksize 1150 x 550 mm, Tyres: Vulkollan more
5
Gate valve with flange, butterfly valve, butterfly valve, ball valve, butterfly valve, globe valve, gate-type MV 5211-electric control valve connection DN65 290 mm Nominal pressure PN16-2x valves available-price-piece weight 25.7 kg / piece Licgv more
6
Vehicle data - make: BT - type: PES 125 L / / HH 2900 mm battery from 2016 / initial lifting / duplex - drive type: electric - load capacity: 1250 kg - load Centre of gravity:-lifting height: 2900 mm - range: 0 mm - year: 2008 - operating hours: 3509 - internal e No.: C0469 _ Mast data - mast type: duplex - lifting height: 2900 mm - height: 1980 mm - free lift: 1500 mm - carriage: 0 mm - forks: 1150 x 75 x 40 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1980 mm - weight: 0 kg _ ... more
5
EMod VKM64/23-90 type 3 ~ engine MOT.-No. 7885876, 0. 65kW 8450 rpm, used, good condition, 100% functional Gfwbwsp more


bomag bt 6...
every day

New machines via email!

Be informed!

to

to

Change search
BOMAG BT 65 4
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close