Used Bottom Plate for sale (12,750)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Bljdjy Aubujpfx Apboh Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Bsdpfxjywzius Apbjlh

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Bodpfx Aew A Ng Espbslh Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Blodpfeyaqttjx Apbsh

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional Bsdpfxew Hhwwe Apbelh

Condition: used, Cast bed Length: 2410 mm Bledpfswnfz Nox Apbeh Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T Blsdowtc Hgepfx Apbeh

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Bodpfxowlhd Ue Apbslh Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Bjdpfeh Auahsx Apbolh 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Bjdpjwlhflofx Apbolh Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Bsdpoun Nvbsfx Apbjlh

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Bedewk Rlxjpfx Apbelh Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11/10575, working width: 3,000 mm, sheet thickness (max.): 16 mm, TECHNICAL DETAILS Bjdozapqwspfx Apbjlh Sheet metal width: 3,000 mm Sheet metal thickness: 16 mm Control system: conventional MACHINE DETAILS Rated current: 63 A Voltage: 380 V

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Blodevd Eiyspfx Apboh

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm Bodpfjzbhqxjx Apbelh -Weight: 2820 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Blsdjzbhn Depfx Apbjh -Mounting plate: with T-slots -Length: 3050 mm -Width: 3000 mm -Height: 445 -Groove width: 28 mm -Slot spacing: 275 mm -Dimensions: 3050/3000/H445 mm -Weight: 4000 kg

Condition: good (used), Clamping plate with T-slots, plate panel, welding table, T-slot plate, clamping plate, scribing and marking plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: T-slot plate with solid base frame Blodpfxeza Sxwe Apbeh -Length: 3030 mm -Width: 3000 mm -Groove width: 25 mm -Dimensions: see photos -Overall dimensions: 3030/3000/H500 mm -Weight: 4500 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate Bsdpfx Aov D Hkrepbjlh -T-slot plate: clamping plate on solid base frame -Length: 3200 mm -Width: 1625 mm -Groove width: 30 mm -Dimensions: see drawing in the photos -Dimensions total: 3200/1625/H720 mm -Weight: 2300 kg

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside Blodpfx Apeyn Rc Robsh -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Bodjxpuipepfx Apbjlh

Condition: used, Year of construction: 2005, sheet width 3100 mm Bljdpfx Ajzbc Acjpboh plate thickness 12 mm distance between columns 3260 mm back stop - adjustable 3 - 1250 mm power capacity 37 kW voltage 400 V weight of the machine ca. ca. 14 t dimensions of the machine ca. 4,00 x 4,00 x 2,20 m CNC-controlled plate shear

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Bsdstqgnyjpfx Apbelh Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t Bsdjzakf Nopfx Apbslh -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Condition: used, Year of construction: 2008, only approx. 20K plates done Bsdpfx Aoza A D Dspbslh RIP York Workflow Inlinepunch 425 Azura C95 Clean out unit Available: at short term

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Table: 1000 x 1000 mm Height: 1000 mm Bljdpfxswffz Dj Apbeh Weight: approx. 650 kg In good condition.