Used Brakes for sale (20,114)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Nodpfx Ajw Iq Ugefzokt Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, maximum load weight: 33,000 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 01/2008, loading space volume: 37,300 m³, total width: 2,470 mm, Year of construction: 2008, BURG BPO 13-27 RGZXX 37,300 LITER HOLVRIEKA TANK Body: Burg stainless steel tank, 37,300 liters, Holvrieka First registration: APK: Chassis number: XLK332780034558 Dimensions (LxW): 1163 x 247 cm Curb weight: 7,000 kg Payload: 33,000 kg Gross vehicle weight (GVW): 40,000 kg Suspension: Air suspension Axle configuration: 3 axles Axles: SAF axles with disc brakes Tyre size: 385/65 R22.5 Tyre condition: - Rear axle 1: left outer 50%, right outer 50% - Rear axle 2: left outer 50%, right outer 50% - Rear axle 3: left outer 80%, right outer 80% Features: - ABS - 37,300 L stainless steel tank, exclusively used for oils and greases (all food-grade) - SAF axles with disc brakes - Excellent condition BURG tank trailer - Only used for oils Additional Information: - Curb weight: 7,000 kg - Tyre size | First axle: 385/65 R22.5 - Tyre tread depth, inner left | First axle: 50% - Tyre tread depth, inner right | First axle: 50% - Max axle load | First axle: 9,000 kg - Tyre size | Second axle: 385/65 R22.5 - Tyre size | Third axle: 385/65 R22.5 - Tyre tread depth, inner left | Second axle: 50% - Tyre tread depth, inner left | Third axle: 80% - Tyre tread depth, inner right | Second axle: 50% - Tyre tread depth, inner right | Third axle: 80% - Max axle load | Second axle: 9,000 kg - Max axle load | Third axle: 9,000 kg - Price on request: Yes - Axle position | First axle: Rear - Brake type | First axle: Disc brakes - Suspension | First axle: Air suspension - Alloy wheels | First axle: Yes - Axle position | Second axle: Rear - Axle position | Third axle: Rear - Brake type | Second axle: Disc brakes - Brake type | Third axle: Disc brakes - Suspension | Second axle: Air suspension - Suspension | Third axle: Air suspension - Alloy wheels | Second axle: Yes - Alloy wheels | Third axle: Yes Additional features: - Alcoa wheels - Homepage Nkedpfx Afsxzm Hdozst - Alloy wheels - SemCollection - SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please check the costs and procedures applicable in your country in advance Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 13 h, control type: CNC control, controller manufacturer: ESA, Equipment: european tool clamping system, lower tooling, safety light barrier, upper tooling, BENDING POWER 40 t CNC CONTROL ESA NUMBER OF AXIS 4 HOURS 13 bending length 1250 mm x axis travel 1000mm oil capacity 80 litres motor power 7.7 KW stroke 215 daylight 455 throat depth 410 table height 800 Nkjdpfxoyb R I He Afzst table width 60 length 2075 width 1700 height 2300 weight 3300kg With 2x stop fingers, manually adjustable (R+Z axis) 1x split set of pointed tools - top 1x rotatable Multi-V die block SAFETY Side safety device (swivel doors) FIESSLER laser safety device Rear safety device (swivel door) 1x remote double foot control 2x front support arms Operating instructions INCLUDED

Condition: used, Year of construction: 1991, Press brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Nksdox Tzl Iepfx Afzjt Maximum press force: 1,250 kg Maximum stroke: 180 mm Sheet thickness: 8 mm Working width/opening: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 A Weight: 9,900 kg Ref. ä21126 Availability: immediately

Condition: ready for operation (used), Press force: 250 t Nkodpfx Afex Tr Ugezjt greatest working length: 4050 mm equipped with CYBELEC DNC 70 PSG control

Condition: used, axle configuration: 3 axles, first registration: 09/2011, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,430 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2011, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Alloy rims = Notes = Number of axles: 3, Unladen weight: 7,190 kg, Gross weight: 39,000 kg, Kingpin size: 2 inch, Alloy rims, Suspension type: Full air suspension, ABS, EBS, Side wall material: Tarpaulin, Sliding roof, Axle type: SAF Nkedpfx Aew Ibmtsfzot = More Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 3 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 2 mm Axle 3: Tyre tread left: 4 mm; Tyre tread right: 9 mm Weights Kerb weight: 7,190 kg Payload: 31,810 kg Gross vehicle weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Competitive prices • Trustworthy business practices • Multilingual service • Customer-oriented approach • Assistance with import and transport • (Export) number plates arranged quickly • Professional technical services • The security of ‘recognisable quality’ • And much more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an enquiry via our website. Ask directly about our European warranty package.

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm Nodpsrk Sg Rsfx Afzekt OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm Nkodpferk Shcox Afzet DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm APPROACH SPEED: 160 mm/sec RETURN SPEED: 160 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm Njdpfxoxn U Rqj Afzekt UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R Nksdpfx Ajmyc I Nefzjt BENDING LENGTH: 3130 mm TONNAGE: 80 ton THROAT DEPTH: 405 mm DISTANCE BETWEEN UPRIGHTS: 2700 mm OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 4000 x 1700 x 2400 mm

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm Nksdpfjtq Ngbex Afzet R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 83245, control type: CNC control, actuation type: hydraulic, controller manufacturer: Robosoft, controller model: BC59 T Grafisch, bending force (max.): 135 t, type of crowning: CNC-controlled, power: 15 kW (20.39 HP), HACO ERMS 30135 (83245) Technical condition: Good, used Bending length: 3100 mm Tonnage: 135T Type of press brake: Synchro Backgauge: Y1 + Y2 + X CNC controlled, R-axis manual Nkedpeyc Ncfjfx Afzet Backgauge length: 800 mm Crowning: Yes (CNC controlled) Daylight: 400 mm Throat depth: 250 mm Stroke: 200 mm Control: BC 59T Graphical 2D control Motor power: 15.0 kW 400V Tools: Yes, multiple sets of press brake tools Tooling system: European standard Serial number: 83245 Year of manufacture: 2008 Total length: 3500 mm Total depth: 1700 mm Total height: 2500 mm Weight: 7800 kg Serial no.: 83245

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nkodjx Sxukepfx Afzot

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Nkedpfsx Sw Sujx Afzot Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Nkedpfx Afowwvx Dozet Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Light Guards Full length top and bottom tooling

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 5,393,817 h, machine/vehicle number: 1621G, control type: CNC control, bending force (max.): 160 t, overall weight: 13,700 kg, Unfortunately, we do not have a data sheet for the machine, but here are the key details from the nameplate: Type: GP160 Serial No.: 1621 G Year of manufacture: 1999 Weight: 13,700 kg Press force: 1,600 kN Ram stroke: 400 mm Ram speed: Down: 150 mm/s Pressing: 10 mm/s Up: 100 mm/s Control type: Cybelec PC900 Tooling: Nksdpeyc R Sbofx Afzot Interchangeable die V10/V12/V16 3 m V24 3 m V30 approx. 2 m V60 Blade R1mm 3 m Blade R6mm 3 m Plus various radius tools in short segments. The machine is available from March, but the date is generally negotiable.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Cone G25_neu, Electric press brake G25 with spindle drive CoastOne - Made in Finland New machine Pressing force: 104t Bending length: 2600mm Njdpfex Tg Alox Afzjkt Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Cone G30_neu, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G30 Nsdpfx Afjx Tgz Uezskt Pressing force: 1250 kN Bending spindles: 5 Servo motor power: 5 kW Biegelaenge max: 3100 mm Free Maschinenstaenderdurchgang: 3200 mm Frame Width: 4014 mm Frame height: 2950 mm Frame depth: 1970 mm Frame Type: O-frame Table height: 1000 mm Machine weight: 6000 kg Mounting height: 600 mm Y-axis, bending stroke: 280 mm Y-axis, Repeatability: +/- 0.002 mm Y-axis, bending speed: 10 mm / s Y-axis, Anna marriage approach speed: 100 mm / s Y-axis, Rueckzugsgeschwindigkeit: 100 mm / s X axis. Speed: 500 mm / s X-axis Repeatability: +/- 0.025 mm X-axis stroke: 600 mm X-axis, max. Duration: 800 mm Delta X-axis, speed: 100 mm / s Delta X-axis Repeatability: +/- 0.025 mm Delta X-axis travel: +/- 50mm R-axis, speed: 100 mm / s R-axis Repeatability: +/- 0.05mm R-axis stroke: 200 mm Z-axes, Geschwidnigkeit: 2500 mm / s Z axes Repeatability: +/- 0.5 mm Z axes, traverse: 100 - 3000 mm

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Bull12_2026, Electric press brake Bull12 with spindle drive CoastOne - Made in Finland New machine Pressing force: 100t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system Nsdpfxex Tgzze Afzskt - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: G30_2026, Electric press brake G30 with spindle drive CoastOne - Made in Finland New machine Pressing force: 130t Bending length: 3100mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system Nkodpfx Aox Tgzuefzst - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: G40_2026, Electromechanical CNC press Manufacturer: CoastOne Oy Nkodpfxex Tgy Ds Afzst Type: Cone G40 Pressing force: 1500 kN Bending spindles: 6 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard Cbgdzvzgpj - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Bull15_2026, Electric press brake Bull15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table Njdpfx Afox Tgyqszskt - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: C15_2026, Electric press brake C15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard Nsdsx Tgx Tjpfx Afzokt - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, Year of construction: 2026, machine/vehicle number: G20_2026, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G20 Nedox Tgxyepfx Afzokt Pressing force: 600 kN Bending spindles: 3 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: C12_2026, Electric press brake C12 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system Nkodpfx Aex Tgxgofzst - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation