Used Brake Bleeding Device for sale (26,975)

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation Fpsdpjxvp S Ejfx Agrjb -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: ready for operation (used), controller manufacturer: TS3, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, upper lower Wila tooling 5 axes: X / X' / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Fpedox Imkfepfx Agrjb Backgauge: CNC Locking speed: 90 mm/sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Fpsdpfx Aeut S E Negrjb Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. Fpedpfxov Hchlj Agreb 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: repair required (used), Manufacturer: Amada Type: 5020 Fpjdpfov Umm Ijx Agrob Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing,

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Fpodpfsxc D Uuex Agrjb Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 50 h, machine/vehicle number: 2390, bending force (max.): 100 t, stroke length: 140 mm, throat depth: 300 mm, distance between stands: 2,600 mm, overall weight: 6,650 kg, TECHNICAL DETAILS Bending force: 100 t Cylinder stroke: 140 mm Open width without tooling: 345 mm Distance between uprights: 2,600 mm Throat depth: 300 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Rotational speed: 1,500 rpm MACHINE DETAILS Control system: DA 66 T Oil capacity: 125 L Total weight: 6,650 kg Fsdjx Eyv Nopfx Agrjpb Power: 7.5 kW Voltage/Power supply: 400 V AC Control voltage: 24 V AC/DC Operating hours: under 50 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, bending force (max.): 80 t, working width: 2,500 mm, stroke length: 200 mm, overall weight: 7,500 kg, Equipment: foot remote control, TECHNICAL DETAILS Press force: 80 t Bending length: 2,500 mm Stroke: 200 mm MACHINE DETAILS Dimensions & Weight Required space (L x W x H): approx. 3,700 x 2,000 x 3,200 mm Machine weight: approx. 7,500 kg EQUIPMENT 2 support arms in front of the machine Light barrier in front of the machine Foot pedal Fpedpfjx I Ealox Agrjb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 9,874 h, bending force (max.): 173 t, working width: 4,250 mm, stroke length: 600 mm, throat depth: 420 mm, TECHNICAL DETAILS Press force: 1,700 kN Working width: 4,250 mm Stroke: 600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,700 x 3,000 mm Total weight: 16,000 kg Control type: CNC-controlled Press beam operating hours: 9,874 h EQUIPMENT 5-axis backgauge Fpjdpjx R S S Hofx Agrob Hydraulic tool clamping (top/bottom) Die adjustment for bending CNC-controlled bending aid Bendguard safety system ACB angle measurement sensor Note: The machine is sold without tooling.

Condition: used, machine/vehicle number: 15037991278R / 1407713xxxx, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 18748 Specifications: - 2015 model - Type: SEHK300 Fpedpfx Asvgyd Rogrsb - Slightly used - Remote control with bluetooth - Lifting capacity: 30,000 - Ready for delivery Description: 2015 Suxxesion pipe spreader in good condition. Flies with a number of pipes and extra equipment (see pictures). Ready for delivery.   Own weight: 1 Model: SEHK300 rørløfter

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Type APHS 3108 x 150 Capacity 150ton year 2007 Bending length 3100mm Max Stroke 260mm Machine weight 10,000kgs Top tool weight 60kg Bottom tool weight 100kg Fpjdpjx Au Dtefx Agrsb Max stopping time 80ms

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Fjdpsx Sxukjfx Agrjpb Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm Fjdpfox S H Uxex Agrepb - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,663 h, controller model: MMC PLC, bending force (max.): 320 t, working width: 4,100 mm, stroke length: 265 mm, throat depth: 400 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Travel X-axis: 600 mm Travel R-axis: 250 mm Fpedpfx Agsx I Hzwerob Travel Z-axis: 2,900 mm Stroke: 265 mm Throat depth: 400 mm Distance between uprights: 3,750 mm Installation height: 550 mm Table width: 60 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2 Control system: MMC PLC Oil capacity: 600 l Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,300 x 4,020 mm Weight: 29,000 kg Operating hours: 42,663 h EQUIPMENT Hydraulic crowning Side safety fences Rear safety guard FIESSLER light barrier Note: The machine is sold without tooling.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Fodpfxowwvx De Agrepb Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Light Guards Full length top and bottom tooling

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177 Fpjdjvg At Ispfx Agrsb

Condition: as good as new (ex-display), The AHK V 30175 CNC - Delem DA58 2D TX is a state-of-the-art press brake in the Press Brakes category, designed to meet the highest standards in modern manufacturing. KNUTH's AHK V CNC series excels in delivering superior quality, precision, and reliability, incorporating advanced design technology and robust construction. This machine boasts a steel frame that enhances rigidity and accuracy, precision-engineered components, and a spacious work area for complex bending sequences. The DELEM graphical touchscreen provides efficient CNC programming tools for seamless control over the bending process. Features like motorized lower crowning and a safety-focused design ensure optimal performance when working with thicker sheet metals. Additionally, the press brake includes robust hydraulic systems and premium components, promising long-lasting reliability. As you consider your options in Press Brakes, you'll find that the AHK V 30175 excels, making it an ideal choice for any shop focusing on sheet metal processing. Request a quote today to learn more about this adaptable and powerful machine tool. Fpodpsv Rbxdjfx Agrsb

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Fpjdpfx Agex Sw Suerob Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Fsdpfox I Ebiex Agrjpb Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Support arms 1 set of upper and lower tools Safety guard

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Grab included New control console Very little use Description: Fjdpfx Agow Rah Ijropb Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, controller model: Cybelec DNC 800, bending force (max.): 160 t, working width: 3,000 mm, distance between stands: 2,650 mm, overall weight: 16,000 kg, TECHNICAL DETAILS Press force: 160 t Bending length: 3,000 mm Frame gap (distance between uprights): 2,650 mm MACHINE DETAILS CNC axes: y1, y2, x, R Control: Cybelec DNC 800 Machine weight: approx. 16 t EQUIPMENT Two-hand foot switch Hydraulic top tool clamping Hydraulic crowning Hydraulic bottom tool clamping 5 manually adjustable backgauge fingers Die shifting Fpsdpfxjx I D T Ro Agrsb Tool package Side safety doors

Condition: used, machine/vehicle number: 50xxxx, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 18255 Specifications Gantry crane: Model year: 2016 Type: Gantry crane for railway Rail type: A100 Height to main hook: 11.9 metres Lifting capacity: 4 x 10 tons Fpodpfxjvg Rkho Agrob Total weight: approximately 131,865 kg Span length: 5.5 + 31 + 8 meters Delivery: Ready for delivery at short notice Description: Powerful Gantry crane from 2016 , previously used in a railway context, for sale.The crane has four hooks with a capacity of 10 tons each , and is ideal for heavy lifting and precise handling of large items. The crane is delivered fully loaded on a truck , ready for transport. Shipping costs are additional.Can be delivered quickly by arrangement. Total Weight: 131865

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: CYBELEC DNC 880S, bending force (max.): 100 t, working width: 2,050 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Pressing force: 100 t Bending length: 2,050 mm MACHINE DETAILS Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 Control: CYBELEC DNC 880S Dimensions & weight Dimensions: 2,650 x 2,600 x 2,700 mm Weight: 8,000 kg EQUIPMENT Hydraulic Wila upper clamping Motorized crowning Fpsdpfx Aox I D Saogrsb

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19552 Specifications: Fsdpevyf Uzefx Agrepb Lifting capacity: 2.5 tons Span: 18 meters Remote control Ready for delivery Description:Munck overhead crane for sale.According to the owner, it has seen very little use since it was purchased in 2018.Equipped with remote control and a 2.5-ton capacity.Available for prompt delivery. Own weight: 4000 Model: Traverskran

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: Cybelec DNC 60, bending force (max.): 50 t, working width: 2,050 mm, Equipment: foot remote control, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 50 t Bending length: 2,050 mm Fodpfx Aox I D E Hogropb MACHINE DETAILS Controlled axes: Y1, Y2, X, R Control unit: Cybelec DNC 60 Weight: 7,000 kg EQUIPMENT Foot pedal Hydraulic upper tool clamping 2 manually adjustable backgauge fingers Tooling