Used Safan E Brake for sale (54)

Condition: ready for operation (used), controller manufacturer: TS1, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, boven- en ondergereedschap van Wila 5 assen: X / X#39; / R / Z1 / Z2 vergrote slag van 265 mm Capacity: 50 ton x 2550 mm Kwedpfxex Imkfo Ab Teu Backgauge: CNC Locking speed: 90 mm/sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Kwodpfx Abjut S E Ne Tsu Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI Kjdpfx Abjx Np Ehe Tswu • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves

Condition: ready for operation (used), controller manufacturer: TS, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 2,900 mm, total width: 1,850 mm, total height: 2,620 mm, power: 13.5 kW (18.35 HP), travel distance Z-axis: 115 mm, empty load weight: 3,150 kg, passage width: 2,050 mm, 3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Kwjdpsyf Ruhjfx Ab Tju Capacity: 40 ton x 2050 mm Backgauge: CNC Locking speed: 90 mm/sec

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, stroke length: 300 mm, number of axes: 6, travel distance X-axis: 600 mm, overall weight: 6,400 kg, total height: 2,810 mm, travel distance Y-axis: 300 mm, pressing force: 102 t, product length (max.): 4,175 mm, This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information • Throat depth: 590 mm • Control system: CNC – EC 20 • Upper beam stop time: < 92 ms Kjdpfxjx D Eane Ab Tswu • Safety distance (light curtain): ≥ 185 mm • Electrical supply: 3 × 400 V / 50–60 Hz / N / PE • Connected load: Max. 11 kW Additional equipment • Tools visible in the photos are not included but can be sold with the machine for an additional fee. Technical Specification Bending Length 3060 mm Dimensions Machine Depth 2140 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used CNC press brake from Safan Model: E Brake 100 3100 Capacity: 3100 x 100 tons E Control CNC controller (latest software) with additional screen Y1, Y2, X, R, Z1 and Z2 CNC-controlled axes Hydraulic WILA upper clamping Year of manufacture: 2011 Ksdoycv Etepfx Ab Tewu

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Model: E Brake 100 3100 Ksdpfx Absx I Nzgj Tewu Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Wila hydraulic tool clamping Available directly from January 7

Condition: good (used), functionality: fully functional, Description: Kwodpsych E Sofx Ab Tsu The machine is in good technical condition, with the possibility of testing upon prior agreement. 3 controlled axes – Y, X, R. Manual tool clamping. Includes tools – see the last photo. A video of the machine in operation is available.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Expected in approx. 2 months, used 4-meter CNC press brake from Safan Model: H Brake 170 4100 Capacity: 4100 x 170 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled CNC crowning Kjdpeycv Uujfx Ab Tswu Wila hydraulic upper clamping 1 set of tooling

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, back gauge travel distance Z-axis: 1,000 mm, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Kwedpexzf Dzsfx Ab Tju Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, distance between stands: 2,550 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Kodexyw Sbspfx Ab Tswu Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 3-meter CNC press brake from Safan Model: H Brake 120 3100 Year: 2005 Capacity: 3100 x 120 tons CNC control of Y1, Y2, X, XDelta, R, Z1, and Z2 axes Ksdpfx Aboxtbqus Tjwu WILA new standard tool clamping Upgraded ESA graphical controller Lazersafe laser system

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-53T - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Punch holder: Standard - Tool holder type: WILA-standard - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg Kodpfx Aboxwmwbs Towu - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2009, Expected in approx. 1 month: Used 4-meter CNC guillotine shear by Safan Model: M Shear 430 6 Capacity: 4300 x 6 mm Kedpfx Aoycwalob Towu High hold-down system Return to sender system Year of manufacture: 2009 Images shown are of another identical machine.

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer Kwsdorgtfgopfx Ab Tsu -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Model: DNCS 110 3100 Capacity: 3100 x 110 tons CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Ksdpfex I Nzyex Ab Tewu Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Kodpfx Abjx Ed H As Tswu

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Kwjdpfx Abjx Dr U Ej Teu

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Please request further details and photos. Kedpjx Dr Dajfx Ab Tswu We can purchase your faulty press brake.

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Kwedjx Dq T Tjpfx Ab Tju

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness aluminum (max.): 16 mm, sheet thickness steel (max.): 13 mm, back gauge speed R-axis: 50 mm/s, TECHNICAL DETAILS Maximum sheet thickness (steel): 13 mm Maximum sheet thickness (aluminum): 16 mm Maximum cutting length: 3,100 mm Cutting angle: 0.5° – 3° Sheet thickness (450 N/mm²): 1 - 13 mm Backgauge speed, R axis: 150 mm/s Backgauge travel, Z axis: 1,000 mm Kwjdpsw Ucy Isfx Ab Teu Front support arm length (from blade): 1,500 mm Rear buffer speed: 125 mm/s Cuts per minute at full length: 18 Cuts per minute at minimum length: 46 Min. cutting clearance: 0.04 mm Max. cutting clearance: 0.5 mm Positioning accuracy: +/-0.03 mm MACHINE DETAILS Power supply type: Three-phase Main power supply: 3/N/PE - 50Hz - 400/230V Motor power: 30 kW Total weight: 12,500 kg Overall length: 4,000 mm Overall width: 4,500 mm Overall height: 2,000 mm EQUIPMENT - Documentation/manual - Finger guard - Safety light barrier DESCRIPTION SafanDarley guillotine shears feature unique technology. The hydraulic system is controlled electronically during the cutting process. The amount of energy consumed by this system is calculated according to the thickness of the material being cut. The backlash-free ball screw drive enables positioning accuracy of +/-0.03 mm, while the minimal clearance of 0.04 mm allows quality cuts even on materials ranging from 0.5 mm up to the machine’s maximum thickness. The design of the worktable ensures a straight cut, even under heavy loads. The automatic selection of clearance and cutting angle according to material type and thickness, as well as compensation for backgauge position, allow even less-experienced operators to run the machine efficiently and consistently achieve high product quality.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: B8820, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), overall weight: 9,800 kg, TECHNICAL DETAILS Sheet thickness max.: 8 mm Working width max.: 3,100 mm Back gauge depth: 1,000 mm MACHINE DETAILS Control: CNC Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Weight: 9,800 kg Transport packages: 1 Kwodpfsyh Nl Iex Ab Teu EQUIPMENT Electric backgauge Pneumatic sheet support system Fixed finger guard Motorized angle adjustment Motorized cutting gap adjustment Ball bearing table Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: B8643, sheet thickness (max.): 4 mm, overall weight: 6,200 kg, working length: 3,100 mm, TECHNICAL DETAILS Max. sheet thickness: 4 mm Working length: 3,100 mm Max. working pressure: 300 bar Kwedpfoylv E Sjx Ab Teu MACHINE DETAILS Weight: 6,200 kg Connected load: 11 kW Connection voltage: 3 x 400 V 50 Hz EQUIPMENT Touchscreen control Automatic sheet thickness and angle adjustment

Condition: good (used), functionality: fully functional, Year of construction: 1982, Used 3 meter CNC press brake by Safan Type: UCK 80 3100 Kodeyilnbspfx Ab Tjwu Capacity: 3100 x 80 ton Y1 + Y2 CNC-controlled with upgraded ESA S630 CNC controller + new linear scales (cost approx. €7,000) Manual back gauge 1 set of tooling (complete; the last piece is missing in the photo but is included)

Condition: good (used), functionality: fully functional, Year of construction: 2000, Used Safan guillotine shear Type HT 310-6 TS Capacity: 3100 x 6 mm Electrically adjustable backgauge, blade gap and cutting angle adjustment Ksdpfxeyglr Re Ab Tjwu Equipped with pneumatic rear support table