Used Safan Vs 255-4 for sale (52)

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Type: VS 255 4 Phedpfsxzf Slsx Agzea Capacity: 2550 x 4 mm Electrically adjustable backgauge Manual adjustment of cutting angle and blade gap

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Phodjxrf Hwopfx Agzea Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment Psdpfx Agsumpq Nozeha - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: used, functionality: fully functional, Year of construction: 1989, Hydraulic Guillotine Shear Make: SAFAN Model: VS 255-8 Year: 1989 Technical Data: Manufacturer: SAFAN Model: VS 255 - 8 Year of manufacture: 1989 Working Length: 2550 mm Sheet Thickness: 8 mm Motor Power: 11 kW Sheet Hold-Downs: 24 Phsdsxhc Svepfx Agzoa Cutting Angle: min. 0.5° / max. 1.5° Dimensions: L 3.50 x W 2.50 (plus support arms 1.6 m) x H 1.95 m Weight: approx. 8 t Equipment: • Angle gauge • 2 x support arms • Motorized backgauge 1000 mm with digital readout • Pneumatic sheet support device • Adjustable cutting angle • Manual blade gap adjustment • Cutting length limit All information subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Phodpfxoxpqy De Agzja Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Pjdpfx Agsru Un Hszeha Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from guillotine shears SafanTyp VS 255-4 -Hydraulic pump: Sauer Type 4 P 023 LM 929 Podpfx Agji Dudkjzjha -Motor: rotor 5.5 kW / 1450 rpm -Hole distance: 215/140/Ø12 mm -Individual components: see photos -Dimensions: 735/350/H300 mm -Weight: 88 kg

Condition: used, Year of construction: 1989, Manufacturer: Safan Type: VS 310-10 Phodpfx Ajwnhivogzja Cutting width: 3100mm Max. Thickness: 10mm Motor-power: 15kW Machine indicated cutting line, but is without backgauge. - Year: 1989 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 1980, Used Safan guillotine shear Phedpoxzga Rjfx Agzsa Type VS 310 6 Capacity: 3100 x 6 mm Electric back gauge Manual adjustment of cutting angle and blade gap

Condition: used, functionality: fully functional, Year of construction: 1982, machine/vehicle number: B6141, sheet thickness steel (max.): 6 mm, back gauge travel distance R-axis: 1,000 mm, input voltage: 380 V, overall weight: 4,200 kg, total length: 2,870 mm, total width: 2,340 mm, total height: 1,930 mm, cutting length (max.): 2,050 mm, Equipment: documentation/manual, SAFAN VS 205-6 Shear – Good general condition Phodpfowc Tm Nox Agzsa We are offering a SAFAN VS 205-6 shear, built in 1982, in good working order. ✅ Machine tested and inspected by us ✅ Documentation included with the machine ✅ Available immediately, subject to prior sale 📦 Price displayed excluding taxes 🚚 For any collection, delivery, or commissioning requests, please contact us. 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Phedpfx Agox Dq T Tezsa

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Phjdpfx Agjxdb Eyezsa Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Height: 2150mm Weight: 8900kg

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer Psdpfx Agergtfgjzsha -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Podpsxtpwvefx Agzoha Capacity: 4300 x 6 mm Year of manufacture: 1987 Electric backgauge with NC readout Adjustable cutting angle

Condition: good (used), Year of construction: 1975, Used plate shears from Safan Phsdpfsxlgmrsx Agzea Capacity 3100 x 13 mm Electric back gauge Adjustable cutting angle Machine comes as from work, fixed price based on so along

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Type: HT 310x4 Capaciteit: 3100 x 4 mm Touch screen besturing Podpexlf Inefx Agzjha Automatische plaatdikte en hoek instelling

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Phodpfjut S E Nsx Agzsa Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: ready for operation (used), controller manufacturer: TS3, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, upper lower Wila tooling 5 axes: X / X' / R / Z1 / Z2 Phedpfx Aex Imkfjgzoa Capacity: 50 ton x 2550 mm Backgauge: CNC Locking speed: 90 mm/sec

Condition: good (used), functionality: fully functional, Year of construction: 2004, The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500 kg Inspection in operation is possible by prior arrangement. Phsdpfxextqvme Agzja

Condition: used, functionality: fully functional, working width: 3,100 mm, sheet thickness steel (max.): 15 mm, back gauge adjustment: motor-driven, power: 22 kW (29.91 HP), overall weight: 13,500 kg, Capacity: 3100 x 15 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 22 kW. Country of origin: Netherlands. Psdpfexn Sa Nsx Agzeha Size (L x W x H): 4250 x 3600 x 2000 mm. Weight: 13.500 kg. Manual adjustable blade angle, adjustable cutting length, and motorised blade gap. Light guard on backgauge. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1980, sheet width 3000 mm plate thickness 6 mm Psdpfx Agovxwihezsha cutting angle quantity of oil 150 l total power requirement 15 kW weight of the machine ca. 6,2 t dimensions of the machine ca. 3,9 x 2,2 x 1,7 m Front stop on the left, 2 support arms, motorized rear stop, manual adjustment of the cutting gap, 1 set of spare knives

Year of construction: 1991, condition: good (used), functionality: fully functional, Newly sharpened knives! TECHNICAL DETAILS Cutting length: 3.100 mm Max. Sheet thickness (steel): 13 mm Overhang in the side stand: 75 mm Cutting angle: 0,5 - 4°. Engine power: 18,5 kW MACHINE DETAILS dimensions: 4.200 x 2.700 x 2.010 mm Weight: 10.800 kg EQUIPMENT Phedsizwrpepfx Agzoa - splitter guide - with backgauge operable from the front with mech. counter 1.200 mm range - stepless centrally adjustable cutting gap setting by means of handwheel - cutting line illumination - 2 support arms - foot pedal - balls in table - single and continuous stroke (with adjustable delay time) - sensitive aut. cutting length adjustment - push-through time adjustable up to 2 s - 15 pieces hydraulic hold downs - operating instructions in german width for transport with dismounted backgauge 1.750 mm

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Psdpfex I Nzysx Agzeha Model: DNCS 110 3100 Capacity: 3100 x 110 tons CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface Phsdpex Np Ehjfx Agzoa • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Model: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Wila hydraulic tool clamping Phedpfex I Nzgjx Agzea Available directly from January 7