Used Safan E-Brake 80-2550 Ts3 for sale (57)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Hodsut S E Nopfx Aaaenk Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Hnjdpfx Aaeyykk Heask Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton WIla clamping with 1 set of tools TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled HS High Speed version

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm Hnedpex Np Ehsfx Aaask • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves • Tools optional available:1. Hemming Upper Tool2. Hemming Die3. 84° Die

Condition: used, Year of construction: 2013, SAFAN DARLEY - SAFAN E-BRAKE 150-3100 - 2013 Hsdpfx Aoyt S Apjaaonk - system EC20 - servoelectric system /not hydraulic/ - 50% cheaper usage costs compared to hydraulics - faster, better effectivity, less maintenance - Wila New Standard tool clamping - 150 t - backgauge (X) + 4 endstops (Z) - bending length 3060 mm - between columns 3100 mm - stroke 300 mm - appr. 12800 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Used CNC press brake from Safan Model: E Brake 100 3100 Capacity: 3100 x 100 tons E Control CNC controller (latest software) with additional screen Y1, Y2, X, R, Z1 and Z2 CNC-controlled axes Hydraulic WILA upper clamping Hnedpsycv Etofx Aaajk Year of manufacture: 2011

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm Hedpfx Aaexdc A Hoaonk - Throat depth: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Condition: good (used), functionality: fully functional, Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. 3 controlled axes – Y, X, R. Manual tool clamping. Includes tools – see the last photo. A video of the machine in operation is available. Hnsdpfx Aaeych E Soask

Condition: good (used), Year of construction: 2004, Used small press brake by Safan Type: H Brake 90 1600 TS1 Capacity: 1600 x 90 tons TS1 CNC control Year of manufacture: 2004 Y1, Y2, X and R axes CNC controlled Hnodpfx Asy Atwzoaaek Wila New Standard top clamping Wila 13 mm lower clamping (hydraulic clamping) Light curtain

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Hsdpfx Aoxzf Dzeaaenk Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Hedpfx Asxyw Sbjaajnk Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used 3-meter CNC press brake from Safan Model: H Brake 120 3100 Year: 2005 Hjdsxtbquepfx Aaasnk Capacity: 3100 x 120 tons CNC control of Y1, Y2, X, XDelta, R, Z1, and Z2 axes WILA new standard tool clamping Upgraded ESA graphical controller Lazersafe laser system

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel Hnodpoxpqy Djfx Aaask - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC Hjdjxwmwbspfx Aaaonk - Control system brand: Delem - Control system type: DA-53T - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Punch holder: Standard - Tool holder type: WILA-standard - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2015, Very nice 4-meter Safan M shear Type: M Shear 430 6 Hnodpfx Aaoycwaloaek Capacity: 4300 x 6 mm High hold-down system Scrap flap system Return-to-sender system Year of manufacture: 2015

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA Hedpfx Aaorgtfgsaonk -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Type: HT 310x4 Capaciteit: 3100 x 4 mm Touch screen besturing Automatische plaatdikte en hoek instelling Hedsxlf Inspfx Aaaonk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness aluminum (max.): 16 mm, sheet thickness steel (max.): 13 mm, back gauge speed R-axis: 50 mm/s, TECHNICAL DETAILS Maximum sheet thickness (steel): 13 mm Maximum sheet thickness (aluminum): 16 mm Maximum cutting length: 3,100 mm Cutting angle: 0.5° – 3° Sheet thickness (450 N/mm²): 1 - 13 mm Backgauge speed, R axis: 150 mm/s Backgauge travel, Z axis: 1,000 mm Front support arm length (from blade): 1,500 mm Rear buffer speed: 125 mm/s Cuts per minute at full length: 18 Cuts per minute at minimum length: 46 Min. cutting clearance: 0.04 mm Max. cutting clearance: 0.5 mm Positioning accuracy: +/-0.03 mm Hnsdew Ucy Iepfx Aaajk MACHINE DETAILS Power supply type: Three-phase Main power supply: 3/N/PE - 50Hz - 400/230V Motor power: 30 kW Total weight: 12,500 kg Overall length: 4,000 mm Overall width: 4,500 mm Overall height: 2,000 mm EQUIPMENT - Documentation/manual - Finger guard - Safety light barrier DESCRIPTION SafanDarley guillotine shears feature unique technology. The hydraulic system is controlled electronically during the cutting process. The amount of energy consumed by this system is calculated according to the thickness of the material being cut. The backlash-free ball screw drive enables positioning accuracy of +/-0.03 mm, while the minimal clearance of 0.04 mm allows quality cuts even on materials ranging from 0.5 mm up to the machine’s maximum thickness. The design of the worktable ensures a straight cut, even under heavy loads. The automatic selection of clearance and cutting angle according to material type and thickness, as well as compensation for backgauge position, allow even less-experienced operators to run the machine efficiently and consistently achieve high product quality.

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Hjdpfsx Ed H Aex Aaaenk

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Hsdpfxjx Dr U Ej Aaaonk

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Please request further details and photos. We can purchase your faulty press brake. Hedpfx Aox Dr Daoaaenk

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Hnjdpfxex Dq T To Aaaek

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1975, sheet thickness (max.): 13 mm, working length: 3,100 mm, TECHNICAL DETAILS Working length: 3,100 mm Sheet thickness: 13 mm MACHINE DETAILS Operating voltage: 380 V Current: 37 A Control voltage: 220 V Hnodpfxsyyb Rks Aaaek Frequency: 50 Hz EQUIPMENT Electric back gauge Adjustable cutting angle

Condition: good (used), Year of construction: 2000, Used Safan press brake Type CNCL K 110 3100 Y1, Y2, X, R1, R2, Z1 and Z2 axes CNC controlled CNC crowning Safan TS2 control Hydraulic Wila Baps upper tool clamping Hedpfx Ajy A Hm Nsaajnk Includes set of tools

Condition: good (used), Year of construction: 1997, Used small press brake from Safan Model: SMK L 25 1250 TS1 Capacity: 1250 x 25 tons Hsdpfxsy Atw Uj Aaaenk TS1 CNC control Y1, Y2 and X axes CNC controlled Machine is supplied with one set of tools (not yet visible in the pictures)

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Safan guillotine shear with discharge unit Type VS 430 3 Capacity: 4300 x 3 mm Hnjdpfx Aoyzgdroaaok Electrically adjustable back gauge Manually adjustable cutting angle and blade gap Equipped with lift/discharge device at the rear