Used Cable Slot for sale (6,043)

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Godsgq Un Aopfx Amysit Weight: 240 kg

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Gedpfx Asyxq Upomyjit

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm Gisdpfohtn Sfox Amyot -Weight: 1548 kg

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine Gedpfsx R Sv Ssx Amyoit -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Gedpfethuzpox Amyeit Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface Gsdsh R D Uzspfx Amyeit - Underside also milled, ribs rest flat and support - Ideal as a base plate Net weight 1140 kg good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm Gijdpfx Ajd Dk A Asmyst - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, power: 338 kW (459.55 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Braking system For vehicle inquiries, Mr. Seidel is at your service (by phone). Iveco X-Way 460 6x2 Skip Loader Truck Axle configuration: 3 axles, trailing axle, cab Cab version: Active Space, large-capacity cab Engine: Cursor 11, 460 HP, Euro VI Transmission: 12-speed HiTroniX, automated Permissible gross weight: 26t Drive axle: single reduction, single axle Rear axle air suspension, disc brakes, steered trailing axle, single tires Application: mixed use, for road and light off-road operation Vehicle version: standard chassis with cab Vehicle set-up: ON Wheelbase: 3,440 mm CEE type plates Engine speed: 1900 rpm, engine type plate Steel rims Reverse gears: standard Tires: DRIVE T. 315/80R22.5 Speed limiter: 90 km/h Electric roof hatch, transparent for MLL high roof Manual cab tilt device Front headlights: halogen Black decorative film on doors Air suspension for cab Fog lights First aid kit Windshield: non-heated Exterior mirrors: electrically adjustable and heated Cab roof insulation: standard Electronic immobilizer and 2 vehicle keys Digital tachograph EG 4.1 Passenger seat: static Rear axle air suspension Hi-TroniX 12TX 2210 TD COC (Certificate of Conformity) for general vehicle approval Wheel chocks: 2 units Batteries: horizontally mounted on frame Standard air tank labels Alternator: 2160 watts (24 Volts x 90 Amps), recommended for tail lift operation Rear shock absorbers Moderate climate version Standard execution Air compressor: 2-cylinder, 630 cc Chassis frame painted grey Digital VIN code APU pressure release to atmosphere Trailer brake: standard Air reservoirs in steel design, quantity depending on suspension and trailer version Standard applications Exhaust tailpipe to the left Mechanical battery cut-off switch on chassis - right side VIN: manufacturer index ZCF Emissions standard: EURO VI E Lifting gear for trailing or leading axle (TX/P) Omission of rear underrun protection Trailer version for continuous trailer braking system Fuel tank: 290 liters, aluminum Rear crossmember D-value: 130 kN AdBlue tank: 50 liters Trailer socket: 24V operation, 15-pin Heated diesel pre-filter with separator Gsdoywdckepfx Amyjit Rear frame overhang: 1,758 mm Transmission mode: standard Optimized A-pillar aerodynamics ECO switch: power to eco mode for TCO optimization via consumption-optimized engine and transmission settings 4 DIN storage compartments above VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0 Transmission software ECO-Roll (coasting function) Driving style analysis (DSE) Adaptive cruise control (ACC) Lane departure warning system (LDWS) Warning triangle compliant with ECE-27 Standard rear lights Hill-start assist (Hill Holder) for comfortable hill starts Warning flasher Electronic Stability Program (ESP) Emergency brake assistant (AEBS) PTO NH/4C with pump connection, suitable for Meiller or crane tipper Rocking mode (free rocking function) Left and right luggage compartments AS cab with standard roof Transparent sun visor, exterior mounted on cab roof Additional diesel/water heater, 4kW Curtains for bed Signal horn behind bumper (air) Raised lower bed...

Condition: excellent (used), Year of construction: 1995, 4 units 6 pressure clamps Giodpfx Asyxcxtsmyst regulation of oscillation regulation of slot position up/down regulation units right/left possible drilling without oscillation CE total power 13kW

Condition: good (used), Cable protection ring -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces Gijdpfx Aob A Svwemyjt -Price: per package -Weight: 3.6 kg

Condition: used, mileage: 737,954 km, power: 331 kW (450.03 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,310 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, trailer coupling, = Further Options and Accessories = - Remote-controlled central locking - Lift axle - Tow jaw coupling - PTO (Power Take-Off) - Radio - Sun visor - Spotlights = Notes = NCH container system: Type: 2525-5-130 25,000 kg 645 cm Front: leaf spring suspension – Rear: air suspension Gjdpfx Amev Niuqjysit = Further Information = General Information Colour: Violet Model number: AROCS 3345 / NCH 25T CONTAINER-S Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Steered; Tyre tread depth left: 50%; Tyre tread depth right: 50%; Suspension: Leaf spring Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Tyre tread depth inner left: 75%; Tyre tread depth outer left: 75%; Tyre tread depth inner right: 75%; Tyre tread depth outer right: 75%; Suspension: Air suspension Rear axle 2: Tyre size: 385/65R22.5; Steered; Tyre tread depth left: 60%; Tyre tread depth right: 60%; Suspension: Air suspension Weights Kerb weight: 12,820 kg Payload: 18,680 kg Gross vehicle weight (GVW): 31,500 kg = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) We speak Russian as well. We strive to provide correct information; however, no rights can be derived from the texts provided.

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Gsdpfx Amofn Tu Toyjit Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope Godpfx Asfn Tvhjmyjit ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak Gijdsfn Tvkepfx Amyet ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up Gijdpfx Ajdf Ufpsmyst - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: used, axle configuration: 1 axle, Year of construction: 1977, VAT/margin: VAT qualifying Gsdpfx Asytdymemyeit

Condition: excellent (used), For sale: used Klauke K18 press. The professional ENERGOTYTAN KLAUKE K18 mechanical press is designed for the toughest electrical installation tasks. Its robust construction, suitable for both indoor and outdoor use, ensures reliable operation Giedpfew Slkdsx Amyjt

Condition: used, mileage: 24,424 km, power: 220 kW (299.12 HP), axle configuration: 4x4, color: orange, driver cabin: day cab, gearing type: semi-automatic, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, For enquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Mercedes-Benz Unimog U530 4x4 skip loader Removable body, superstructure: jotha CombiCon 7018 UL, lifting/ payload: 7,000 kg, front axle differential lock, Euro 6 axle bridge variant, combination cylinder 12/16, axle installation variant Euro 6, reinforced steering components on axle side, synthetic oil (HA), axle ratio i = 6.377, trailer brake, dual-circuit, Haldex disc air brake, wheelbase 3,900 mm, VarioPilot (left/right changeable steering), side protection device, central mounting brackets, rear mounting brackets, front mounting plate DIN76060, type B, size 3, air conditioning, air-suspended driver's seat with seat heating, air-suspended passenger seat, additional left-hand steering column switch, universal mount for control unit, main battery switch at battery box, ABS trailer socket 24V, 7-pin/5-pin, reversing alarm, 32-pin equipment socket, 12V constant power outlets (C3), 12V and 24V center console, 24V/25A on-board socket in cab with C3 signal, rear view camera, generator 28V/150A, monitor for camera system, external sun visor (transparent), immobiliser with transponder, driver’s cab strength per ECE-R-29/03, EasyDrive (hydrostatic drive) (SN), Automatic Shift (EAS), clutch flange Ø150mm (instead of 120mm), gearbox oil filter, increased continuous power hydrostatic drive, hydraulic transmission oil cooler, oil/air, 6-stage tipping cylinder, loose, hydraulic rear connector 4-way, cell 1+2, rear pressure line, second hydraulic circuit, separate rear return line, hydraulics for tipping mechanism, single-acting trailer tipping connection, rear, LS hydraulics, 4-cell, separate continuous use, snow plough relief, implement carrier series, compression level (6) 2, compression level (7-8) 12, chassis LL, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, pre-installation for warning light for telescopic cylinder, radio with USB port and Bluetooth, pre-installation for toll detection, pre-installation for trunked radio (12V), pre-installation for Truck Data Center 6 (FB Card), 25L AdBlue tank, entry lights, LED flashers yellow left/right with tripods, additional LED high beam on roof bar, cab rear work light (LED, top), additional adjustable LED headlights A-pillar, engine OM936, R6, 7.7 L, 220 kW (299 hp), 1200 Nm, engine version Euro VI E, High Performance Engine Brake, quick radiator cleaning system Clean-Fix, engine PTO incl. front PTO, PTO speed limitation, EATU SCS ON-HIGHWAY EURO VIE, rear cross member for lowered trailer hitch, CTT trailer hitch, 14.00x22.5 drop center rims, red/white retroreflective warning stripes, warning triangle and warning light, weight variant 16.5 t (7.5/9.0), adjustable AHK support bracket, Scharmüller trailer hitch, Rockinger hitch, 48mm pin, Unimog implement carrier, model generation 1, instruments/labels/manuals in German, additional hydraulic control, auxiliary roof lights front and rear, tyre tread: 1st axle 16-18mm, 2nd axle 18mm. Upon request, we will be happy to provide a leasing or finance offer. Mr. Seidel (Tel. ...) will gladly assist you. Further information can be found on our homepage: ... Errors, changes, and prior sale reserved!!! ESP Cab type: Local transport ... Giedpfx Ameyuadqsyet

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Gsdpfjynv E Rjx Amyoit Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Gsdpfxeyf Dqis Amyjit Battery capacity: 70 Ah EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° Gedpfxsyf A Nqj Amysit MACHINE DETAILS Battery: 12 V, 70 Ah EQUIPMENT Gripper function Note: The truck is sold without a charger.

Condition: used, Year of construction: 1978, throat 1410 mm workpiece height max. 1150 mm stroke 1400 mm table diameter 1400 mm milling-head swivable +/- 10 ram - range of adjustment 750 mm pulling power 50000 N Gedpfxeyqvgto Amyeit workpiece weight 10000 kg Ram stroke speed 30 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, used, good condition, low operating hours, with accessories with pneumatic lift for drilling on two levels Make: Ganner Model: Junior Motor: 1.5 kW Two-lever operation Table size 850 x 360 mm Drill chuck 20 mm Dowel drilling device with 24 positions Workpiece stop Central stop Pneumatic lift Gedpfx Aoythcrjmyjit Pneumatic workpiece clamps, 2 pcs Space requirement approx. 300 x 1000 x 1300 mm Weight approx. 270 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Delivery in current condition as inspected, function tested without overhaul, without guarantee or warranty

Condition: used, Year of construction: 1954, Technical details: max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW work table:: 650x250 mm ram adjustment: 100 Manuell mm no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm table adjustment: ca. 360 vertikal mm Gjdpfxev Ty R De Amyjit tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t dimension machine xH: 1,2 x 0,9 x 1,8 m

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Hub 30mm Gisdpsi Dx Nnjfx Amyjt Eckenausstoßtiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test