Cable stripping machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Cable cut-off and stripping machine FILOMAT PSAM-740 E

Westfalenstr. 12-14, 58455 Witten, DEGermany
6416 km
1979
excellent (used)
Cable cut-off and stripping machine for almost all materials e.g. Teflon, Nylon, Neopren, PVC, Rubber, Kynar, glass fibre usw. Cable lengths 1 - 10.000 mm Tolerance +/- 1,0 mm Wire Ø 0,2 - 4,5 mm Stripping lengths 1,0 - 80,0 mm Fn2n2ux Motor 0,2 kW Voltage 220 V Operating pressure 5 bar Measurements L x B x H = 103 x 47 x 44 cm Weight ca. 50 kg Capacity at cable lengths 50 mm -ᐳ 11.000 Stck/h at cable lengths 500 mm -ᐳ 6900 Stck/h at cable lengths 2500 mm -ᐳ 1900 Stck/h ... more
5

Cable stripping machine KAB-V Bronneberg KAB-V

More Bronneberg Kab V
Mannheim, GermanyGermany dealership location
6577 km
2017
as good as new (ex-display)
Table machine to the slit and squeeze by cable Cable: 1-50 mm Speed: 15 m / min Power: 1.1 kw Weight: 65 kg Bkuw27h Dimensions: 240 x 620 x 600 mm Rigid, thin, single-core cables are squeezed more
13
Wire Cutting And Stripping Machine The Kodera C351, similar to a Komax 34, is a cable cut and strip machine. It has a wire straightener and comes complete with guide sets. It is capable of processing a variety of cables from 28 AWG up to 8 AWG. Vsjope The machine is in excellent condition. more
9
Length Max 3300mm, width Max 2300mm, height Max 1800mm, Total power of the engines 7.3KW, traction of the drum in rotation 976 Nm, curb weight 1680 Kg Bczkn78ecp Applications: Cable type rigid and flexible cables, steel cables, hoses, hydraulic hoses Cable diameter: 0-60mm or 0-100mm Drum data: max dimensions diameter 2240mm width 1350mm min dimensions diameter 600mm width 450mm more
4
"cable-dog"Make: Jacob Thaler KGType: 40NKHE201GSSYear of manufacture: 1998 Bl39jle0 more
11
Mebus finishing machine 380V/16A 3,84KW 3-shaft polishing switching Sanding belt right Belt left Filter unit with suction motor Pumice motor 2ramk3 Sales-milling machine The machine was used only privately and has therefore little signs of use. more
1

Automatic Stripping Machine KOMAX KAPPA 220

Berlin, GermanyGermany dealership location
6738 km
2000
good (used)
Cable cross section: 0.05-6mm², cable dimensions: AWG 10-AWG 30, max. outer diameter: 9mm, length: 480mm, width: 340mm, height: 390mm, including one set of knives and the instruction manual. Bb0gdnbzdl more
6
automatic wire separation and wire stripping device wire size 0.05 up to 2 mm² stripping lengths up to 2,500 mm for complete and partial wire strippings electrical data 220V Y2c372 space requirements width - 410 x depth - 330 x height - 245 mm weight approx. 29 kg accessories: - documentation - spare blades - feeder tube           more
3
Machine strips cables for the recycling of copper and aluminum from electric conduction cables. Industrial cable peeling machine. Hylw00j The machine is prepared for several wire sizes, such as single-pole, three-phase more
2

Cable Rewinding Machine NICOLETT NICOLETTI MECCANICA SRL CD15-M3 SE1 OA10Q60-NE

Mariborska ulica 57, 2314 Zgornja Polskava, SlovenijaSlovenia
7209 km
2009
good condition (used)
Serial No.: 0495 weight of the drum: 2000 kg Max. drum turn: 70 min-1 Power: 3 kW Ch8bnkom Max. traction torque: 421 Nm Voltage: 380 V more


cable stri...
daily

New machines via email!

Stay updated!

welding machine for cable tray Ideal 400/1600

Bad Bentheim , GermanyGermany dealership location
6367 km
used
Line wire diameter: 3,0 - 8,0mm Cross wire diameter: 3,0-6,0mm with cropping 3,0-8,0mm without cropping Wgf2ykz9 Max. cross wire length: 1600mm Max. line wire length: 3000mm more
6

Back Stripping Machine Polygraph Brehmer LBW 650

Salzgitter-Bad, GermanyGermany dealership location
6578 km
used
Faelzelmaschine / Back-Stripping-Machine, Type: 651H 9o2mmmcwk more
4

CABLE SCARF MACHINE KABELSCHAELMASCHINE

Ellenberg, GermanyGermany dealership location
6715 km
used
KABELSCHAeLMASCHINE 8lyvczt9c SEE PICTURES more
6
The machine cable recycling WRS 400 A Main engine power: 15 kW Bml2ma83 Year: 2014 Status: in use, efficient more
6

Cable rewinding machine ROSENDAHL TR 1000

Steyr, AustriaAustria dealership location
7039 km
1987
used
Kabelauf - and unwinding system or San Jose 10 28 F and 10 28 E F, measuring unit M161 control Siemens Ekkilf28c more
1
Machine for stripping cables - see picture Cslygh33 more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbu28hgq3m CHMER CM H32Z EDM Hole Drilling Machine -- Cross travel 9.8". -- Z-Axis servo travel 13.38". -- Backslide travel 7.9". -- Electrode diameters available 0.0080" - 0.236". -- Max height of workpiece 13.8". -- Dielectric reservoir capacity 6.3 Gal. -- Wire guide 0.040". -- Dimensions 35.4" X 4.43" X 89". -- Weight 1,763 Lbs. Equipped with: -- Programmable control. -- X-Y-Z-Axis built in DRO system. -- High precision glass scales. -- Aut... more
6
Homag Panel Sizing & Edgebanding Machine, KF 26/07/A3/25 Make : Homag Model : KF 26/07/A3/25 Serial# : 0-200-03-0005 Year of Mfg. : 2002 Condition : Used, very good conditions Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION Fixed side on left, movable side on right. Double-Sided mac... more
1
Turning length 1500mm Turning diameter 600mm Spindle speeds 35-3000 rpm Bczllxtwvt Input 40 hp Fitted with 40 Automatic Tool Change more
3

Bed type Correa Milling machine CORREA CF25/25 - 625027CF25/25

Burgos, SpainSpain dealership location
6043 km
2004
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 2800 x 1000 mm Number of slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1000 mm Z axis traverse: 1000 mm Milling head Head type: Universal manual (... more
1
Milling machine Correa A bench fixed 0piy0mp9 Model 25/25 Year 1990 Races (mm) X 3000 Y1000 Z1200 Size of table (mm) 3000 x 1000 Design load (T) 7 Cone of spindle (Iso) 50 Speed of spindle (Rpm) 2-3000 Speeds ahead (mm/min) 2-5000 Feeding speed (m/min) X 10 YZ8 speed Main motor power (Kw) 30 Machine: CNC NUm manual universal head / gripping hydr. the tool more
1

Drilling machines IBARMIA Spain SX 32

Babberich, NetherlandsNetherlands dealership location
6320 km
1996
ready for operation (used)
Technical data Ausladung400 x 420 mm Bohrleistung32 mm Drilling capacity in steel Ø32 mm Drilling capacity in casting Ø35 mm Thread cutter M18 Spindle retainer Mk3 Spindle diameter Ø125 mm Spindelhub150 mm Maximum distance spind... more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Bbuzhqalxj UNIQUE 3450 CNC Mortise & Tenon for Miter Door:The Model "3450" CNC Mortise and Tenon Miter Machine is a 4-zone machine designed to accept pre-moulded material, cut a 45° miter and mortise or tenon the part to produce a hidden joint mitered door. -- Utilizing patented high precision ball screws to drive each axis, the machine is able to provide an exact tolerance every time. -- "UMTPro" software can be customized for cutting different shapes and... more
6

Milling Machine - Vertical HERMLE U630T

More Hermle U 630
Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
x-travel 630 (875) mm y-travel 500 mm z-travel 500 mm control Heidenhain TNC 410 weight of the machine ca. 4.8 t Bbv2k2sgbx more
7
Dovetail Routing Machine Hoffmann PU2 32-100 HOFFMANN PU 2-32/100 (PU 2G) Pneumatic Dovetail Routing Machine Free-standing version with solid cast table and large working surface at a comfortable working height. With two routing units to produce two dovetail slots in sizes of W-1/2/3 Infinately adjustable router cross-centres from 32 mm to 100 mm. Year of construction : about year 2004 Bowm3ddw in good condition more
8

Floor type Correa Milling machine Correa L30/43 - 7900406L30/43

Burgos, SpainSpain dealership location
6043 km
1995
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-407 Technical features Dimensions Table dimensions: 6120 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4300 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type: Auto-indexing UD... more
4
Milling machine ZAYER model: 77AF Race X, Y, Z: 1700 x 1000 x 800 Table: 2100 x 700 Cone ISO 50 Heun83sl3 Spindle power: 20Kw Firsthand on 3 axes weight: 8 500 Kg more
1

Milling machines Deckel FP 3 A

More Deckel Fp 3
Babberich, NetherlandsNetherlands dealership location
6320 km
1990
ready for operation (used)
Technical data X Achse500 mm Vsiu3m Y - Achse300 mm Z - Achse400 mm SteuerungsartHeidenhain TNC 124 active WerkzeugaufnahmeIso 40 Number of controlled Aschen3 more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. 7bwi7ixr McKnight-Miller 1E Saddel Seat ScooperFeed through , variable feed speed with a capacity of (4 to 12) seats per Min; -- 22" x 22" max. seat size and 2" max. seat thickness. 15 HP Main motor V-belted to 5,000 RPM arbor; 2 HP feed motor,(2) tandem feed chains with lugs feed the seat blank underneath the top cutter head which moves up & down with cam action to shape the seat profile; the high speed steel knives on the arbor are in the shape of the... more
5

Table Type Boring and Milling Machine COLLET BFf 85

Mönchengladbach, GermanyGermany dealership location
6371 km
1966
used
spindle diameter:100 mm x-travel:1000 mm y-travel:1000 mm spindle stroke:710 mm z-axis:900 mm table surface area:1000 x 1120 mm spindle turning speed range:8 - 1600 U/min Tyea9brca spindle taper ISO:40 total power requirement:20 kW weight of the machine ca.:15 t dimensions of the machine ca.: m with digital readout diverse toolholders more
6

Animal bedding shaving machine MBM RHINO Chips 450

DRACHTEN, NetherlandsNetherlands dealership location
6264 km
2017
as good as new (ex-display)
Rhino Chips 450 wood shaving machine With this shaving machine you can make your own wood ships for example horse bedding and other animal bedding. see also our video ! Bczhfucs9r with 2 spiral cutterheads 450 mm and wood inlay hooper 950 x 450 mm The producing of the wooden chips is about 1 m3/hour, depending on the kind of wood and the dimensions of the pieces of wood Demo machine - same as new more
5
max. wheel diameter 275 mm gear width mm max. module 6 min. module 1,5 Control Sinumerik 840C tooth width 5,5 mm spiral angle 0 / 60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m Ndktl more
6

Universal Milling Machine NIIGATA 3 UM

Monheim, GermanyGermany dealership location
6405 km
used
x-travel 1150 mm y-travel 420 mm z-travel 420 mm table surface area 370 x 1600 mm table load 1000 kg spindle taper ISO 50 feed - longitudinal/cross 20 - 800 mm/min feeds vertical 5 - 200 mm/min rapid motion -longitudinal/cross/vertical 3000 / 750 mm/min turning speed range 45 - 1400 U/min voltage 400 / 50 Hz Bbcxddrp9m spindle motor 7,5 kW Control FK 82 power capacity 9 kW Complete overhauled & Modernized in 2016/17 [...] - scraping of all guideways - grinding of table surface - control Un... more
5

Laser marking machine TOPEX LabeLase 1000

Köln, GermanyGermany dealership location
6416 km
2008
used
Bb0k2mzolj LabeLase 1000 marking laser incl. Topex laminating The inscription laser LabeLase and the Topex laminating machine are almost new. The high-quality devices are ideal for labeling metal signs with a high temperature resistance. The lasered signs are either used for galvanizing without lamination or they are coated after laser marking with a protective film for use in steel construction and steel trade, The protective film is suitable for use in blasting and painting. For galvanizin... more
1

SINGLE END TENONER & PROFILER PMK MACHINERY C-1205

North Carolina, United StatesUnited States dealership location
518 km
2017
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Nf8wj PMK C 1205 Single End Coping Machine -- With the C-1205 Coping Machine you can run your Styles first or run your cope first, this machine using a 7.5 HP motor has counter rotating spindles to insure Chip free coping of either square. -- Single profiled or double profiled parts. Since we are only coping one end at a time the length doesn't matter. We can also cope more than one part at a time up to 13.5" wide on the C-1205. -- Two counter rotating sp... more
1

Gear Grinding Machine MAAG SD 65

Mönchengladbach, GermanyGermany dealership location
6371 km
1981
used
max. wheel diameter:650 mm gear width:1 mm max. module:15 (22) min. module:1,5 number of teeth:10 - 200 min. gear diameter:90 mm Zahnschrägung max.:45 ° grinding slide stroke:490 mm grinding wheel diameter:200-280 mm grinding wheel - swivable:0-10 ° workpiece weight:30 - 50 -200 kg base circle dia. - max.:630 mm base circle dia. - min.:65 mm centre distance:413-621 mm feeds axial:0-2100 mm/min rapid traverse:4 m/min power capacity:8,5 kW weight of the machine ca.:8 t Teev9dhmx dimensions of ... more
6

Universal Milling Machine SHW UF 15

Remscheid, GermanyGermany dealership location
6419 km
1994
used
x-travel 800 mm y-travel 650 mm Xo3hbplr z-travel 550 mm more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm Bu2mipxl capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
15
Only 26 mio. impr. Prinect Press Center Alcolor Autoplate Autom. ink roller wash-up device H3w9ftz9 Autom. blanket wash-up device Autom. impression cylinder wash-up device Low-pile delivery Stream feeder Powder sprayer Ultrasonic doublesheet control Antistatic device in feeder and delivery more
1
Elect./Voltage: 380/400 V, 50/60 Hz, 3 Ph. Bbuzkpmd9t BACCI TTFI Miter Door Cut, Drill and Shape -- Cabinet mitre door machine, cutting boring and moulding machine, designed for 45 degree mitre frame door production, with each cycle the parts are trimmed drilled and finger jointed,Features: -- The TTF1, single sided cutting-boring-moulding machine is equipped with: -- - hydraulic control of table stroke. -- - Ball bushing and ground and hardened guides for the table movement. -- - High p... more
3

Table Type Boring and Milling Machine SACEM MST 110/AC

Mönchengladbach, GermanyGermany dealership location
6371 km
1980
used
spindle diameter:110 mm x-travel:3000 mm y-travel:1600 mm z-axis:1600 mm spindle stroke:900 mm table-size:2000 x 1600 mm table load:8 t spindle turning speed range:6 - 1200 U/min feed speeds:3 - 2500 mm/min rapid traverse:3 m/min spindle cone ISO:50 total power requirement:25 kW Ughcrdixp weight of the machine ca.:28 t dimensions of the machine ca.:6,5 x 5,1 x 4,6 m with DRO HEIDENHAIN TNC 121 point to point control ball screws, telescopic covers more
6

Cylindrical Grinding Machine KNUTH RSM 750

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1990
used
centre height 135 mm grinding length 750 mm grinding diameter - min. 8 mm max. grinding diameter 200 mm steady 60 internal grinding diameter 13 - 100 mm max. workpiece weight between centres 75 kg chucking diameter 160 mm table adjustment - longitudinal 160 mm dimensions of grinding wheel 400 x 50 x 203 mm Bcy8tx0aw0 peripheral speed 35 ; 24,5 m/sec turning speeds 1670 U/min swivelling range 180 Grad speeds 15000;20000 U/min total power requirement 4,9 kW hydraulic motor 0,4 kW Length: 2.40... more
2
dimensions of the machine ca. 0,380 x 0,200 x 0,134 m weight of the machine ca. 0,024 t power requirement kW baseplate-clamping range 110 x 70 mm Bbomitldhr workpiece sizes max. 56 x 70 x 25 mm profile depth max. 15 mm angular adjustment 0-2 ° Electrik 24 Volt Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
max. workpiece diameter 440 mm threading length 4000 mm max. module 12 min. module 0,5 max. wheel diameter 440 mm gear width 4000 mm no. of teeth to be hobbed 3 - 300 mm max. swing diameter 600 mm Slide cross Axial = 4000 mm dist. cutter spindle - workpiece spindle 50 / 316 mm diameter of hob 192 x 220 mm head swivability +/- 45 ° taper Morse 5 X9f02w8 shifting 200 mm milling drive motor 22 kW hob turning speeds 80 - 340 U/min electrics - voltage/frequency 400 / 50 V/Hz control Sinumerik 8... more
1
Elect./Voltage: 380 V, 50/60 Cy, 3 Ph. Bbuzky7jtu BACCI TTFI Miter Door Cut, Drill and ShapeCabinet mitre door machine, cutting boring and moulding machine, designed for 45 degree mitre frame door production, with each cycle the parts are trimmed drilled and finger jointed,Features: -- The TTF1, single sided cutting-boring-moulding machine is equipped with: -- Hydraulic control of table stroke. -- Ball bushing and ground and hardened guides for the table movement. -- High precison cutt... more
5
x-travel:300 mm y-travel:220 mm z-travel:400 mm control:Contour 3 tool taper:SK 40 Table dimensions:630 x 330 mm speeds:31,5 - 3150 U/min rapid traverse:4,0 m/min quill stroke:65 mm dimensions of the machine ca.:1,8 x 1,5 x 2,2 m total power requirement: kW weight of the machine ca.:1300 kg Bbase2a83b more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 Tephbfcmc total power requirement: kW weight of the machine ca.:12 t dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more


cable stri...
daily

New machines via email!

Stay updated!

to

to

Edit search
CABLE STRIPPING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close