Cable stripping machine

GRS Feinwerkmechanik GRS 12

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 Lhedpsvmz Idsfx Akqen The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Lsdpfxjq E Ti Ho Akqohn If you want to try it, please bring cable.

Year of construction: 2024, condition: new, Overband plate magnet with cleaning mechanism Made of stainless steel 1.4301, tightly welded Includes a drawer for cleaning Dimensions: 800x500x180mm 4 M16 ring bolts on the back These two lifting magnets were used by one of our customers as a "police magnet" in the meat processing industry. Both overband magnets are in perfect condition. The price mentioned refers to 1 piece. Currently, 2 pieces are available for immediate delivery from stock! All information is without guarantee, subject to availability! Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competence lies in providing our customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Made of stainless steel 1.4301, tightly welded Includes a drawer for cleaning 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm Lhodpfx Aehfwmdjkqsn 800 x 520 x 250mm Completely welded stainless steel housing to protect the magnet core Ring eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Mounting possible above all types of conveyor systems...

Condition: new, Year of construction: 2022, Diameters 40-140mm Engine 2.2kW Price per 1 piece Lhodpfx Akodprvueqsn

Year of construction: 2025, condition: new, Beltpress for fruits and vegetabes Beltwith 1250mm capacity up to 10000 kg/h 27 rollers beltcleaningsystem with brushes and highpressurecleaning Lhjdpfxobpz D Ao Akqon

Condition: used, Aluminum silo (plastic granulate silo) resting on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Available quantity: 1 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper base: 15° Angle of the cone: 90° Equipment and connections: Ledpfx Ajww Em Dskqjhn In the upper base: 1 x access hatch DN 600 with hinged cover 1 x vent 1 x roof edge railing with handrail 2 x crane lugs 1 x flange for filling line 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe support brackets for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator Otherwise, as per the images and drawing.

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Lhjdpfsvriuvjx Akqjn

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Lhsdpfeua Tbwsx Akqen Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Ljdpfxoq Nmw Ie Akqjhn

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Ljdpfx Aeqmi Irekqjhn Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.