Case packers buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 230 V, 60 Cy, 1 Ph. W8xtjkb LITTLE DAVID CF-40T Automatic Case Erector SystemThe CF-40T is a fully automated packaging system case erector formally designed for easy size changeover and maximum user [...] CF-40T's chain and lug side drive automatically squares boxes and cases and compensates for poor tolerances in corrugated dimensions. The chain-driven hopper accepts up to 150 RSC or HSC cases. The CF-40T is easily integrated into most warehouse production areas. Standard Fea... more
3
Stair-step grating, steel stairs, staircase, 00zrdjtax -feuerverzinkt Width 1350 mm Depth 350 mm Total height 90 mm -passage assurance-43 stair treads available Award pieces Transport dimensions 2 x pallets of 1400/800/H950 mm Weight 1 pallet 454 kg, 1 pallet 434 kg more
4

Excavator Case WX168

Leeds, United KingdomUnited Kingdom
5762 km
2015
excellent (used)
2015 Case WX168 Wheeled Excavator, Blade, CV, QH, Piped, Aux. Piping c/w Stabilisers, Reverse Camera Bctfchikmh This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 4th-6th July 2018. For more information go online. more
8
CA professional packaging machine of a renowned manufacturer of tape width up to 70 mm. maximum dimensions: width 650 mm x height 650 mm, length unlimited. CA minimum dimensions: width 130 mm x height 120 mm x length 160 mm. Hjo8fpjkk -No settings for different carton formats required. -Two-sided lock top and bottom. Transport drive side. Pressure for automatic width and height adjustment continuously adjustable. Working height of adjustable machine. Performance approx. 800 ca... more
10

case-makers Kolbus Kolbus DA 232

TJ Schijndel, NetherlandsNetherlands dealership location
6289 km
ready for operation (used)
Corner cutter, Copilot system with touch screen monitor, Motorized format adjustments, Board prestacking conveyor, Board cutter: PS, Centre strip infeed, Chopper for the centre strip waste, Glue unit, Viscosity control, Pressing station, Stacking delivery, Device for inside lining with hotmelt, Specifications are subject to manufacturers changes in similar models, Maximum open case size : 660 x 380 mm, Maximum open case size : 210 x 130 mm, Cloth width: 234 - 690 mm, Cloth height: 154 - 410 mm, ... more
6

Case Binding System Horizon HCM-1 HCP-1

Germering b. München, GermanyGermany dealership location
6837 km
2006
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics L9ivx offer consists of: - Horizon hardcover maker HCM-1 - Horizon hardcover crease and presser HCP-1 Hard cover case binding Hotmelt spine and side gluing - Book block: max: 297x215,9mm min: 133,7x136,7mm - Cover: max: 333x502,8mm min: 169,7x322,4mm - Book block thickness: 3 to 25mm - Production speed: 40 books/h more
1

CASE CLAMP (SEMI-AUTOMATIC) LIGMATECH MPH 410

North Carolina, United StatesUnited States dealership location
518 km
2012
used
Elect./Voltage: 380/480 V, 50/60 Cy, 3 Ph. Bbvssd8smj LIGMATECH MPH 410/25/07 Case Clamp (Semi-Autmatic): (1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads. -- Working capacity:9.8" - 98.4" (250 - 2,500 mm) Length; 9.8" - 27.5" (250 - 700 mm) depth, 12" - 55" (305 - 1,400 mm) height. -- Motorized horizontal & vertical beams can position simultaneously or individually during setup, vertical ... more
5
Freifallförderanlge, pump, silo conveyor -for gypsum plaster machine Trailers Pump Mannesmann Demag Pressure max 2 bar Volume 100 m³/h Lh9lx Support vessel with electric sealing flap Silo vibrator more
4

Excavator Case CX250C

Leeds, United KingdomUnited Kingdom
5762 km
2013
excellent (used)
2013 Case CX250C 700mm Pads, CV, QH, Piped c/w Reverse & Blind Spot Camera, A/C Bctet7p3kx This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK on 4th-6th July 2018. For more information go online. more
6
bore capacity in steel (diameter) 50 mm arm length 2000 mm workpiece height max. 1485 mm bed length 13 m bore spindles - Morse Taper 5 spindle turning speed - 12 steps 30 - 2000 UpM feeds 8 / 0,08 - 0,7 mm/U Icjrosqqs column diameter 410 mm bore capacity in cast iron 70 mm total power requirement 4 kW weight of the machine ca. 5 + ca, 5 t dimensions of the machine ca. 13 x 1,3 x 3 m Condition: ready for operation Automatic clamping Thread cutting device Clamping plate 2 x 1500 x 2000 m... more


case packers
daily

New machines via email!

Stay updated!
7

Case maker Kolbus GD

Nürnberg, GermanyGermany dealership location
6749 km
1969
good (used)
Case maker Kolbus GD Year 1969 - Serial-No. 571 Size min. 110 x 155mm - max. 400 x 576mm Spine width min. 8mm - max. 95mm Speed 10-16 per minute Paper thickness until 3 mm / 300 gr2 Automatic Case maker Bbit2exvux Automatic Turning-In -Available Immediately - -can be inspect- -on stock - can be test- more
12

Case IH 3050

Amsterdam, NetherlandsNetherlands dealership location
6218 km
2013
ready for operation (used)
5.000 €
Offer
Another 10 days
header ; vari feed; working width : 7.60 meters; suitable for New Holland and Case IH combines Bcsy20ealj more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bcm9rx9wvp DEBURGH tow cart system with KOCH Spray booth and Curing Oven line:Over All foot print of the line is Approx. 100' x 150'This line is complete, was set up in 2004 and had very little use, actually when you see it , you will think it is new. This is Line # 1 called the case goods line, but can handle any product. The conveyor line has rotating cart top with turning brackets placed in the system where needed. The pallet turning for close pack is au... more

Casemaker - KOLBUS DA 232 KOLBUS DA 232

Paterna-Valencia, SpainSpain dealership location
6425 km
2006
used
Palletizer Copilot system with touch screen monitor Motorized format adjustments Board prestacking conveyor Board cutter: PS Centre strip infeed Chopper for the centre strip waste Glue unit Viscosity control Pressing station Stacking delivery Device for inside lining with hotmelt Hi73zhrze more
16

Tractor CASE David Brown 996

Eching, GermanyGermany dealership location
6861 km
ready for operation (used)
1.500 €
Offer
Another 19 days
Tractor CASE David Brown 996 Machinery & vehicles 1 piece: S / N 9956911083701, 45 KW, engine No. 45507163113, BJ not recognizable, mileage 6.155, hydraulic rear area, tool bar, tyres front Vredestein tyres rear axle Barum Position: 6 Minimum price: 1.500 EUR plus VAT & premium Bcqekvdflu more
3
Automatic carcase clamp, working left to right Min/max. furniture height: 300 / 1220 mm. Max. furniture width: 610 mm. (max. pass: 720 mm.) N8ubs7gyf Min/Max. furniture length: 300 / 2500 mm. Working height: 500 mm. Number of horizontal pressure units: 3 Cycle tim approx. 20 s. Feed by belt, variable feed speed Working pneumaticaly Automatic detection of the furniture sizes more
5
Production year: 1997 Producer: Ditch witch Model: Case 660 Case 660 trencher 3nms7byn 4 swivel wheels share with the possibility of changing the position of the top down to the sides slant 4x4 digging arm with a spoon chain like new more
3
1 x used Umgreifung band Packers Manufacturer: Brüninghaus Type: A60/60 Year of construction: approx. 2009 Ndsgp Max einpackbares package: 600 x 600 mm incl. feed Terms of delivery: free loaded terms of payment: prior to pick-up more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Mjucatfz Deburgh Cart style finish line set up with (6) spray booths and (4) drying tunnel sections. I do not have the specifics of number of carts or overall length of this line but it was set up to finish furniture casegoods in higher volume production. The line has seen use but is in good working condition. Price includes $5,000 towards dismantling services and any amount over that will be the responsibility of the buyer. more
7
Hydraulic throughfeed press, case clamp manufactured by: LIGMATECH MSP 20/06 RE Year of manufacture: 1998 He has been operating for 2 years Description: in very good condition Workpiece width min-max mm: 255-800, Workpiece length min- max mm: 250-2500, Workpiece height min- max mm: 300-1300, 3va8ycdb Feed rate max m / min: 8m- max 37m 2 cycles/min. Clamp provided with 1 vertical and 2 lateral pressor, controlled by two indipendent hydraulic circuits. Hydraulic box is fixed... more
7

Case maker Smyth Freccia CM

Nürnberg, GermanyGermany dealership location
6749 km
1980
good (used)
Case maker Smyth Freccia CM Year ca. 1980 - Serial-No. 409 Sxdfs2s2z Size min. 110 x 155mm - max. 405x560mm Spine width min. 8mm - max. 95mm Automatic Case maker Automatic Turning-In -Available Immediately - -can be inspect- -on stock - more
2
Usefull sizes: 2,4 x 1,0 x 1,5 m. Ccqymyh 4 horizontal pressure units Pneumatic working cycle more
For sale offer we have a Makita HM0871C + case + chisel chisel hammer ANTI VIBRATION TECHNOLOGY Dust-protected tool holder, suitable for SDS-MAX Full-wave electronics Soft start for precise setting of Indicator reports errors on switch and cable 12 x chisel adjustment Idle impact resistant Self-abschaltende coal Technical data Tool holder suitable for 1,100 W of SDS-MAX power consumption Number of strokes 1,100 - 2,650 min-1 Single shock strength 8.1 J weight according to EPTA 5.... more
6
Zwillingsbereift, pivot arm, SonnenblendeWagennr. 0011, CASE / Poclain excavator type 788 P, built 1997, operating hours 10637, engine: 4 cylinder diesel 55 kW, GVWR 17500 kg, Max. Axle load front 8000 kg, Max. Axle load rear 11000 kg, rear backing plate 2500 mm, tyres 10.00-20 Zwillingsbereift, quick change system, hydraulic swivelling grave space spoon 2000 mm, adjustable boom, Dipper 2500 mm, 2 x 90 bucket, 1 x 50 backhoe bucket, 1 x 30's backhoe, SW, 2 x Schalengreifer (60 + 90), mistakes an... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Vc0yfry DEBURGH tow cart system with KOCH Spray booth and Curing Oven line:Over All foot print of the line is Approx. 60' x 190'This line is complete, was set up in 2004 and had very little use, actually when you see it , you will think it is new. This Line is called the Table Top line, but can handle any product. The conveyor line has rotating cart top with turning brackets placed in the system where needed. The pallet turning for close pack is automatic. ... more
4

Skidsteer Loader Case 410

More Case 410
Kellington, United KingdomUnited Kingdom
5791 km
2007
good condition (used)
2007 Case 410 Skidsteer Loader, Piped - JAF00410N7M460372 S3nvu9 This machine will be sold by Euro Auctions at an unreserved auction in Leeds, UK from the 4th - 6th July 2018 at 8:00am. Please view our website for full inventory and contact information. more
6

Case-making - Casing-In machine Horizon HCM-1/HCP-1

Nürnberg, GermanyGermany dealership location
6749 km
2009
good (used)
Case maker - Crease and Presser Horizon HCM-1/HCP-1 Year 2009 - HCM-1/HCP-1 Serial-No. 312002 Description HCM-1: Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm Cover Material min. 169.7x322x4mm, max. 333x502.8mm In00cpopu Front and Back board min. 139.7x133.7mm, max. 303x212.9mm Spine board min. 139.7 x 7mm, 303x29mm Book block thickness 3 to 25mm Production Speed max. 40 books/hr. Description HCP-1: Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm Book block thic... more
12

Case Poclain 688

Amsterdam, NetherlandsNetherlands dealership location
6218 km
1992
ready for operation (used)
6.000 €
Offer
Another 4 days
Tire valve; 68 kw; Case 4T-motor 390; 4 cylinders; basin: 2 m; tires : 1000-20; working hours on counter 6289 hours Bcrek83n2b more
1

Radial Drilling Machine CASER F 60

Ennepetal, GermanyGermany dealership location
6422 km
1971
used
throat max. 1600 mm drilling capacity steel/cast iron 50/60 mm spindle taper: MK5 throat min. 350 mm vertical adjustment of arm 1000 mm base plate surface area 1500 x 800 mm spindle turning speed range 29-1700 U/min Gh8e09aqu total power requirement 5 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,7 x 1,6 x 2,5 m more
5
Stringers milling machine, router, slot milling, stringers milling machine -2 x stair carriages milling machines-gehärteten shafts-komplettem stop system -Max intermediate dimensions 1550 mm Table dimensions: 4000 x 1900 mm Table height 770 mm Qku9dgbpw more
6
Central lubrication system, differential-SperreWagennummer: 9867, CASE 921 E wheel loader, year: 2007, operating hours: 6150, Cummins 6-cylinder diesel engine 216 kW, weight: 24,000 kg, central lubrication system, axle loads of 12,000 kg, tires: 26.35 R25, articulated, 3100 mm Shovel width, 40 KMH, Vollabine reserved with air conditioning / heating, diesel particle filter, headlight, mistakes and intermediate sale Total weight: 24000 kg Number of axles: 2 mm Fuel type: Diesel B9c7qtrg more
7

Case Bender Tränklein BDAM

Nürnberg, GermanyGermany dealership location
6749 km
1995
good (used)
Case Bender Tränklein BDAM Year 1995 Working width max. 500mm Bcni9buorc undercarriage -Available Immediately - -can be inspect- -on stock - can be test- more
5

Carcase clamp RAMARCH PN-16

Heule, BelgiumBelgium dealership location
6178 km
1998
used
max workpiece length: 2640 mm max workpiece height: 1400 mm width workpiece: 600 mm pneumatic pressure units Ekdd9ch 4 top units with 2 cilinders 3 lateral units with 2 cilinders more
8
T7oj9lh7 MAX DRILLING DIAMETER: 50 mm ARM LENGTH: 1600 mm SPINDLE: 2000 rpm CUBE DIMENSIONS: 750 x 550 x 500 mm PRICE: On demand more
2
Roll sheeter for Hörauf Casemaker and lining machines Nfdiz more
4
Used packaging machine for pallets Bcqzaivpba more
6

"Assembly line for carcase furniture" TERMOPAK ST

Klipphausen, GermanyGermany dealership location
6821 km
2001
used
"Assembly line for carcase furniture TERMOPAK ST Kitchen furniture: Yes Assembly: manually Carcass clamps: 1 Throughfeed carcass clamp: Yes Packing machine: Shrink wrapping machine 0ax0lqdh Turning device: Yes Conveyors belts m: 2 CE-mark: Yes Operating status: dismantled/ stored" more
2
Case rounding machine Schmedt PräRund HHS 17 Year 1986 - Serial-No. 209 Neu3z Output 250 - 300 pcs/h Size range Spine width 10 - 120mm Spine length up to 450mm -Available Immediately - -can be inspect- -on stock - can be test- more
3
Automatic carcase clamp, working right to left Min/max. furniture height: 300 / 1220 mm. Max. furniture width: 610 mm. (max. pass: 720 mm.) Min/Max. furniture length: 300 / 2500 mm. Working height: 500 mm. Number of horizontal pressure units: 3 Cycle tim approx. 20 s. Feed by belt, variable feed speed Bbdj30ho0p Working pneumaticaly Automatic detection of the furniture sizes more
4
Emba 244 ,1989 Ref.Nr : 2519 Manufacturer Emba Model 244 Year built : 1989 Max. sheet size : 240 cm Condition : good Price : on request Technical spezification : • Infeed unit Emba NO SKIP FEED • Emba Lead Edge vacuum feeder • 3 print unit with steel Anilox roll print plate 6 mm anilox 80 lines approx. 11 grams • Slotter with pre creaser section with 8 mm knife • RDC type 240 delivered in year 1997 sn. 657162 with tools cylinder with insert screw . • Glue unit control b... more
10
KOLBUS DA 240 Chronos Bcsoivj79x Automatic Casing Making Machine Viscomatic Pre Melt Unit with Timer Max 660 x 380 mm Min 155 x 110 mm Max Speed 50 Cycles/min Stacker delivery Excellent Condition more
8

Casemaker Curioni 3100 NT

Busto Arsizio, ItalyItaly
6799 km
1984
good (used)
Castaldini Prefeeder Casemaker Curioni 3100 NT year 19874 Vacuum feeder N. 3 bottom printing units Automatic Slotter unit RDC Folder gluer unit Ero electronic gluing unit 2rabwi Sodeme Stitching unit Counter ejector Computer Wrapping machine Pallettizer Para Speedy Pau year 1996 NOTE: Available July 2019 more
1

Carcase clamp GANNER "CONCEPT 70-ECO"

Hohenstein-Bernloch, GermanyGermany dealership location
6691 km
2018
used
2.500x1.400 mm Ss07rk more
8

Case-Making Schmedt PraeDeck

Nürnberg, GermanyGermany dealership location
6749 km
1986
good (used)
Case-Making Schmedt PraeDeck HHS 13 Year 05-1986 - Serial-Nr. 246 Y2qdagbup -Available Immediately - -can be inspect- -on stock - can be test- more
5

Carcase clamp COMIL COSMO NK

Heule, BelgiumBelgium dealership location
6178 km
1990
used
Stationary furniture clamp Hecxxcraq Usefull sizes: 2500 x1300 mm Power installed: 4 kW more

Casemaker - KOLBUS DA 270 KOLBUS DA 270

Paterna-Valencia, SpainSpain dealership location
6425 km
2007
used
Board prestacking conveyor ? Cloth feeder ? Inside lining ? Viscosity control ? Device for producing padded cases ? Auto case counter ? Counter stacker ? Board centre strip magazine ? Chopper for the centre strip wasteanuals and tools Bcpqmjmsqw more
6
Hard cover mounting table Fastbind Casematic XT The machine is in factory condition, with no sign of use, served on the showroom as a demonstration machine. Allows you to cover covers of max. A3 + format. The machine is equipped with work table illumination, edge folding module, vacum table, side margins. Description: Max. Area (W x D) 750 × 476 mm. Max. bending length 750 mm. Max. dimensions of finished cover (closed) 352 × 455 (back) x20 mm. Bcsa8pyq2b Thickness of cardboard cover 8 m... more
5

Casemaker Sipack 2800

Busto Arsizio, ItalyItaly
6799 km
2001
excellent (used)
Inliner Sipack 2800 Year 2001 Sun vacuum feeder N. 2 flexo printing units Cc7dswga double shaft slotter unit Rotary die cutter Folder gluer Valco electronic gluing unit Counter ejector Available July 2018 more
6

Casemaker Crathern Machinery CMG 830 SLC

Oberhausen, GermanyGermany dealership location
6383 km
2008
used
Size: 80 x 120 cm Machine: Laminating machine ( Casemaker ) - Crathern CMG 830 SLC Function: - Pasting and gluing in separate passages Format: - Max. 800 x 1.200 mm - Min. 110 x 200 mm Materials: - Laminating materials: +/- 100 to +170 gr / m² - Cardboard: +/- 1 up to 3 mm, cross cut 1st aggregate: Edge banding type CMG 830-G - Omron PLC controlled main drive - Stainless, chromed glue rollers - Pre-melting boiler type GT 2000, capacity + - 80 l. - Circulatory system with pump - Automatic... more


case packers
daily

New machines via email!

Stay updated!

to

to

Edit search
CASE PACKERS
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close