Used Centrifugal Blasting Sand Blasting Machine for sale (65,238)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020616/P, total width: 70 mm, total length: 90 mm, total height: 180 mm, pressure: 8 bar, operating pressure: 8 bar, input voltage: 230 V, Equipment: cabin, For sale: METAL FINISHING water blasting machine Rjdjy Rz Abopfx Aa Ijw - Type – waterblast 800 - Model – WBL 001 - Serial No. – 020616/P - Year: 2008 The machine has seen minimal use and has been regularly maintained. It is highly practical and extremely efficient. Its key advantage is that with high water pressure—containing abrasive media—it impacts the metal surface, achieving excellent results. The main benefit of the water blasting method is that the water and abrasives circulate continuously, returning to the tank. This means there is no dust, no abrasive particles released into the environment, and the work area remains clean at all times. The machine is connected to the mains supply and ready for immediate operation.

Condition: excellent (used), Year of construction: 2023, For sale is a JET drum sander 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and refurbished by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) - Sanding thickness: 0.8 – 102 mm - Infinitely variable feed rate: 0 – 3 m/min Rsdpfx Aoyzqtqoa Iow - With oscillation - Drum speed: 1450 rpm - Suction connection Ø 100 mm - Motor power: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: JET 2244, drum sander, cylinder, oscillation, sanding machine Reference: R-L0B6O

Condition: good (used), Machine suitable for the polishing and the sanding process (top & bottom) of panels. Tend to be positioned after a boring machine and before an unloading-stacking machine Rsdpfxod Tyvtj Aa Isw - Top cleaning system (motorized rubbered cross belt with brushes) - Total power installed Kw 0,55 ca. - Bottom cleaning system (motorized rubbered cross belt with brushes) - Total power installed Kw 0,55 ca. - Max working width mm 3200 ca. - Top side lifting motor Kw 0,25 ca. - Separate electric and command panel - N. 2 suction hoods

Condition: good (used), Year of construction: 1990, used brushing machine with wacuum table Rodpfx Aajd Tanyj Iew

Year of construction: 2005, condition: used, functionality: fully functional, We are offering this used Technical Nowa Sól OWPS 4.3x3.8x3.0 wheel blast machine, year of manufacture 2005. The equipment is fully functional and complete (currently disconnected from the power supply) and includes a dust extraction filter for the blasting chamber. Maximum weight of treated workpieces: 250 kN Maximum workpiece dimensions during table rotation and wheel blasting: φ3500×2000 mm Maximum load length without table rotation and with pneumatic blasting: 4300 mm Maximum load width without table rotation and with pneumatic blasting: 3800 mm Maximum load height without table rotation and with pneumatic blasting: 3000 mm Number of blast wheels: 4 pcs Capacity per blast wheel: 350 kg/min Drive power per blast wheel: 22 kW Recommended blasting media: cast steel shot or stainless steel shot Recommended media granulation: 0.2–2.0 mm Pneumatic apparatus tank capacity: 200 liters Pneumatic apparatus nozzle diameter: 11 mm Compressed air pressure: 0.4–0.6 MPa Compressed air requirement for the shot blaster: 0.4 m³/h Compressed air requirement for dust collector regeneration: 10 m³/h Compressed air requirement for pneumatic cleaning: 8 m³/h Type of dust collector: dry bag filter (fabric), regenerated with compressed air pulse Installed power (excluding dust collector fan): 130 kW Supply voltage: 400/230 V Frequency: 50 Hz Rodpfxsy I Rq Ns Aa Ijw If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, Special offer price for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 75 x 2000 S Condition: new Belt dimensions: 75 x 2000 mm Belt speed: 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen sanding table: 460 x 75 mm Dust extraction connection: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: Good sanding performance due to high belt speed Quick adjustment for horizontal and angled positions Continuous platen sanding surface for optimal sanding of long workpieces Redpjfnr Aiofx Aa Iow Consistent belt tension thanks to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for round sanding Including quick-release system for fast belt changes Simple adjustment of parallel belt run by means of adjusting screw Graphite coating on the platen sanding surface increases the sliding properties of the sanding belt Scope of delivery: - Sanding belt K 80 - Folding protective cover - Sanding and support table - Workpiece stop - Dust extraction nozzle - Separate on/off button - Base frame

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg Rjdpjwvt I Hjfx Aa Iow

Condition: excellent (used), possibility of sanding on the shoe or flat surface mechanical oscillation feed speed adjustment via variator electric adjustment of the aggregate up/down sanding belt height 150 mm Redpfxjy N Ry He Aa Isw table angle adjustment possibility of sanding curved elements total motor power 5.7 kW year of manufacture: 1994 power supply 380V

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Redpfx Aepgmufja Iow Tech. Data and dimensions: Errors excepted

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, Rjdpfxjy H N Tmo Aa Ijw without warranty or guarantee

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Total power requirement 3,5 kw Rjdjvz Hnrjpfx Aa Iew

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Rodpfx Aaevz Hkgs Iew Weight 250 kg Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1600x1500 mm Weight 540 kg Rjdsvz Hgnopfx Aa Ijw Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x700x1120 mm Rjdpfx Aajvz Hmzj Isw Weight 125 kg Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1470x810x1120 mm Rodpfx Aajvz Hhlj Ijw Weight 250 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4700x1600x1500 mm Redpfovz Hlkjx Aa Iow Weight 580 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x950x1260 mm Weight 400 kg Rsdpfx Aevz Hlqsa Isw Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1680x930x1200 mm Weight 350 kg Rodpfx Asvz Hn Ssa Ijw Total power requirement 3,5 kw

Condition: used, Year of construction: 1999, Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Disc diameter: 600mm Table length: 755mm Table width: 285 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 65 cm x H 130 cm Weight: 290 kg with protractor Rodpfx Ajywx Dija Iew We are looking forward to your questions and inquiries.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Rodpfx Aeyw Rqzoa Isw - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 2000

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 Rodeyw Rqhspfx Aa Isw - Upper (top) section lifting motor: 0.25 kW - Max working width mm 1300 ca. - Built-in control panel

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Rjdpfx Aasyw Rpqe Isw - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 1500 ca.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Rsdpfx Ajyw Rnyja Ijw To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Max useful working width mm 3500

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm Rodpfsxfl Eaex Aa Iow max. sanding height 200 mm year of manufacture 1994 with CE mark

Condition: new, Year of construction: 2024, Sanding belt dimensions: 150 x 2280 mm Motor power: 2.2 kW Sanding belt oscillation Pneumatic sanding belt tensioning Redpfx Aedq H D Sea Ijw Sanding head can be swivelled 90° - 180° Additional table at the idler pulley