Used Chamfer Grinding Machine for sale (64,840)

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: Fabr,Nr,35274, workpiece weight (max.): 6 kg, grinding length: 250 mm, grinding wheel diameter: 300 mm, total width: 1,500 mm, total length: 1,500 mm, grinding diameter: 100 mm, workpiece weight between centers: 6 g, type of input current: three-phase, workpiece length between centers: 250 mm, grinding wheel width: 30 mm, overall weight: 1,500 kg, input frequency: 50 Hz, input voltage: 380 V, workpiece spindle speed (max.): 1,350 rpm, power: 3.3 kW (4.49 HP), Equipment: documentation/manual, rotational speed infinitely variable, type plate available, 1 Hydraulic external cylindrical grinding machine Overbeck 350 R Year of manufacture: 1972 100 mm center height x 350 mm center distance Workpiece spindle: MK 4 Tailstock: MK 2 Grinding wheel diameter: 300 x 127 x 30 Automatic cycle – rapid traverse before automatic feed – dwell time, rapid traverse back, Godpfjzc R Aajx Apcoiu Automatic dressing and compensation after a pre-set number of parts, Technical data is non-binding – subject to prior sale and errors;

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo outside of the machine of an already delivered one in similar scope. Other fotos from the origin machine. -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s Gedpfxoxzk Nio Apcsiu High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Gijdovvkipopfx Apceu

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Gisdpfowhqprsx Apcsu

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Gedpewhqplofx Apcjiu

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm Gsdpfxsyb S N Ss Apcoiu grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW Gijdpfx Apjyb S Riocou weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, Gsdeunt Eyjpfx Apcoiu many accessories.

Condition: excellent (used), grinding length 600 mm grinding width 300 mm Giedpfxjyyqt Ij Apcou workpiece height 350 mm magnetic clamping plate, electical 500 x 200 mm grinding wheel diameter 225 x 25 x 51 mm total power requirement 4 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,5x1,5x1,8 m

Condition: excellent (used), internal diameter 5-200 mm grinding depth 230 mm swing diameter 50 mm centre height 180 mm internal grinding diameter 5 - 200 mm spindle bore 50 mm Gsdjy D T U Aopfx Apcjiu spindle speeds 120 - 1000 mm inclination 90 ° table movement in milling step automatic 3 - 600 mm/min spindle turning speed range 3600 - 40000 U/min spindle diameter 90 mm total power requirement 10 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,1 x 1,6 x 1,8 m

Condition: excellent (used), workpiece diameter 60 mm Gedpfx Apjunt Egjcsiu grinding depth 30 mm clamping length 1000 mm weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Gsdpfoyb S Rcjx Apcjiu Control Kelco 80 weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm Giodpfx Apjunt Iujcou max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm Gijdjwvl H Ujpfx Apcju clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: ready for operation (used), functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, space requirement height: 2,440 mm, space requirement length: 3,000 mm, space requirement width: 2,050 mm, The machine has undergone geometric revision and is fully functional. If required, further work can be carried out, such as a complete overhaul or repainting in your desired color. Gsdpfx Ajzc E Azepcjiu

Condition: good (used), Out of production • Type: XSM945P • Serial number: 20110702 • Glass thickness: 3 – 25 mm • 9 spindles Gedpfx Aeq Abyvopceiu • Minimum glass dimensions: 80 x 80 mm • Year of manufacture: 2011 • Available videos: • Power requirements: 400V, 50Hz, 40A, 20kW • Special price: €4,000

Condition: good (used), With extended roller table Gjdpouqlc Nofx Apcoiu • Type – SILIKANT – 2500 • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price upon request

Condition: good (used), Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Gisdpfx Aoyxf Ttjpceu Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,800 mm, total length: 2,250 mm, total width: 1,400 mm, feed rate X-axis: 25 m/min, grinding wheel diameter: 205 mm, table length: 500 mm, type of input current: three-phase, table width: 250 mm, grinding wheel width: 19 mm, spindle speed (max.): 2,900 rpm, overall weight: 1,350 kg, grinding spindle motor power: 1,500 W, rotational speed (max.): 2,900 rpm, grinding spindle speed: 2,900 rpm, power: 1.5 kW (2.04 HP), grinding wheel speed: 2,900 rpm, input voltage: 400 V, disc diameter: 205 mm, Metallkraft FSM 2550 Surface Grinder Machine Type: Surface Grinder with NC Controlled Vertical Feed Year: 2018 Control: NC Control Condition: Very Good Includes NC Controlled Vertical Feed Table Enclosure Guard Electro-Magnetic Chuck Wheel Dresser Coolant Equipment Halogen Light DRO Auto-Lube Technical Specifications Grinding Wheel Diameter: 180 to 205mm Grinding Wheel Width: 19 to 13mm Grinding Wheel Bore: 31.75mm Spindle Speed: 2900rpm Table Dimensions: 500 x 250mm Giedpfx Asv Iq Shspcsu X Axis Travel Speed: 5-25m/min Drive Motor Power: 1.5kW Electrical Connection: 400V/3Phase/50Hz Machine Dimensions: 2250x1400x1800mm Machine Weight: 1350kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 1996, functionality: fully functional, type of input current: three-phase, power: 15 kW (20.39 HP), input current: 22 A, input frequency: 50 Hz, input voltage: 400 V, We are offering this used Walter Helitronic Power with HMC400, manufactured in 1996. The machine is fully functional, still connected to power, and can be inspected at any time. It is being sold due to the purchase of a new machine and must be collected by June 30th. A video can be sent upon request. Manufacturer: Walter AG Type: Helitronic Power Year of Manufacture: 1996 Serial Number: 6473 Operating Voltage: 400 V Operating Voltage Frequency: 50 Hz Phases: 3~ Control Voltage DC: 24 V Lamp Voltage: 230 V Lamp Voltage Frequency: 50 Hz Rated Current: 22 A Gsdszcbtcopfx Apceiu Current of Largest Consumer: 10 A Connected Load: 15 kVA Wiring Diagram No.: HE6473-K If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, grinding length: 400 mm, grinding width: 250 mm, grinding height: 275 mm, grinding wheel diameter: 250 mm, grinding wheel width: 30 mm, ELB - Surface grinding machine, Model: SW 4 VA I, year of manufacture: 1971, grinding area: 450 x 250 x 275 mm, grinding wheel: 250 x 30 x 51 mm ACCESSORIES: Coolant tank with pump, electro-magnetic chuck 450 x 250 mm, leveling feet Gisdpfxeyzfalo Apcsu

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, center height: 315 mm, workpiece weight (max.): 2,500 kg, grinding length: 2,000 mm, center width: 2,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 630 mm, distance between centers: 2,000 mm, workpiece diameter between centers: 630 mm, workpiece length between centers: 2,000 mm, grinding spindle motor power: 22 W, The machine is in good technical condition. Middle repair in 2012. Testing after previous agreement. Gijdpfxezcatns Apceu

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 027.0149, CNC internal and external cylindrical grinding machine S33 CNC – undergoing refurbishment. Delivery time: approximately 14 weeks. Technical data and accessories as per the attached PDF. Gisdpozcuwbsfx Apceu Photo = sample photo only.

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Precision surface grinding machine Possible surface grinding operations: Gsdpfxex Afpae Apcjiu -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, Year of construction: 1979, Technical details: Giodpfeu Ng Ncjx Apcou grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *