Used Chamfering Machine for sale (83,534)

Condition: excellent (used), HSS saws chamfering machine EYAN Pedpehzcd Usfx Agzsrf

Condition: excellent (used), HSS saws chamfering machine Peruzzi model SAUT 550, fully reconditioned and newly painted, like new Podpfx Aehzcctogzorf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Weight 80 kg Total power requirement 0,75 kw Predpfx Aovz Hf Djgzef

Condition: good (used), Aceti Beveling Machine Good condition, fully functional, can be inspected and tested on site. Shipping also available abroad. Inspection: To avoid any misunderstandings, I would like to point out that the item can be inspected and tested under power before purchase. Please ask questions before purchasing to avoid any confusion. For general questions or to schedule an appointment for an inspection, you can contact me at any time at the telephone number below or above. Errors in the description and subject to prior sale excepted. Prsdpsv Nw Rajfx Agzef VAT is shown separately on my invoices. Shipping via freight forwarder.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 43100, total height: 9,650 mm, Mechanical engineering from Innovative and reliable Machines for weld seam preparation and sheet metal processing Quicker high-speed beveling machine using the roller shear method for beveling technology. These QUICKER machines work according to the roller shear method. In this process, a long chip is from the sheet edge by means of a slowly rotating cutting wheel. This enables This achieves speeds of up to 3.1 m/min (up to 5 times faster than conventional methods). The efficiency is also increased by the low wear of the tool cone. This process is one of the most efficient ways of preparing weld seams. The cost savings of up to 75 % compared to conventional methods. Fast, compact, handy and with infinitely variable angle adjustment from 15° to 55°, this machine is one of the most popular chamfering machines. one of the most popular chamfering machines. The practical scissor lift truck can be adjusted over a wide range for adjustable over a wide range. This allows the machine to easily move past the fixed sheet metal panel. move past the fixed sheet. Of course, the Quicker II can also be operated with a crane. This machine is rotated by 180° for processing bottom chamfers. The holes on the on the upper side match those in the machine feet. Many customers have ordered two of these machines ordered two of this machine. One for the top bevel and one for the bottom bevel. Spare parts can be obtained quickly and tools, such as cutting wheels for steel and stainless steel, are available from stock. ROLLER SHEARING MACHINE GECAM QUICKER GECAM QUICKER - BEVELING MACHINE, STRONG AND HANDY, INFINITELY VARIABLE Predpfxjqvm Uro Agzof ANGLE ADJUSTMENT - Precise adjustment of the bevel angle and the bevel dimension - Stepless angle adjustment 15°-50 - Tools available for all materials - Clear view of the cutting process - For the upper bevel and convertible for the bottom bevel - Stable sheet metal guide for safe chamfering - Chamfering of sheets and tubes - 5 x faster than conventional processes - Highly economical - Low tool wear - Low maintenance - Optional: Lifting carriage for QUICKER with infinitely variable height adjustment (working height approx. 860 mm - 1,200 mm) Europe Technical data: Quicker Bevel capacity at 400 N/mm²: 10 x 10 corresponding to 14 mm bevel at 45° at 600 N/mm²: 8 x 8 corresponding to 11 mm bevel at 45° Max. Sheet thickness (mm) 6 - 30 (40) Bevel angle (°) 15 - 50, infinitely variable Cutting speed (m/min) approx. 3.1 Dimensions (mm) 530 x 650 x 400 Weight (kg) 78 Motor power 4 / 3 Advantages: V 2020/10

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Pjdpfex E Eh Rox Agzorf Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Number of cutting knives: 6 pcs Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Weight: 280 kg

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm Prodpfx Asg Akgtjgzjf hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material Pjdpfju Ngfdsx Agzjrf -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Weight 390 kg Pedpfx Asvz Et Hjgzorf Total power requirement 1,5 kw

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Prjdjwduvnjpfx Agzef Width: 1,2 m Height: 1,7 m Power: 5 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm Psdpom Nb Rijfx Agzsrf

Condition: ready for operation (used), Dowel Cutting and Chamfering Machine Manufacturer: Löser Type AA 200 Table-top machine for the production of wooden dowels, for the efficient cutting and chamfering of dowel rods/round bars. The Type AA 200 Dowel Cutting and Chamfering Machine is a low- to medium-performance machine. It can cut and chamfer round bars made of wood, plastic, laminated paper, and other materials. The dowel length is adjustable between 20 and 150 mm and is determined using a setting scale. The chamfer thickness can be adjusted as required. The machine is equipped with a magazine ring as standard. This allows the operator to operate several machines simultaneously or perform other tasks. The machine features a solid, torsion-free cast iron stand. Extremely easy operation, simple maintenance, and easily accessible lubrication points are further advantages of this machine. Technical specifications: For dowel diameters approx. 6-13 mm Minimum cutting length: 15 mm Largest cutting length: 150 mm Output: approx. 2,000 pieces per hour Weight: 53 kg (tabletop machine) Predpfx Aewmpvhsgzjf Including adapters for dowel diameters 8-9 mm, 10-11 mm, and 12-13 mm. The pinion and chain have been replaced.

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Pjdpfx Ajghrgujgzerf Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. Predpfot Hwylsx Agzef The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1000x900x1400 mm Prodpfx Asvz E Uqjgzjf Weight 680 kg Total power requirement 12 kw

Condition: used, Bar pointing/chamfering machine PAREX Pjdpfxjxdnwpj Agzsrf

Year of construction: 2024, condition: new, functionality: fully functional, ø 110-450 mm, wall thickness max. 72 mm Prsdpfxet A Ufde Agzjf Servo steel infeed and synchronization. NEW, unused

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Predjqpdkcepfx Agzjf - Capacity: about 7,500 - 15,000 dowels/hour

Condition: new, Year of construction: 2022, Diameters 40-140mm Prodpfsdprvusx Agzjf Engine 2.2kW Price per 1 piece

Year of construction: 1991, condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module min. module total power requirement kW weight of the machine ca. t Pjdpet Hwv Hefx Agzorf dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Year of construction: 1975, condition: used, max. wheel diameter 280 mm max. number of teeth 100 max. module 6 min. module 1 Prodpet Hw Dkjfx Agzef total power requirement 6 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Pedjx N Ncgopfx Agzsrf

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Podox Ncu Nspfx Agzerf Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Prodpfx Agjxftqdszef Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Prodpfx Ageiit Erezof Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur