Chipping machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4
DRUM CHIPPER WITH HORIZONTAL FEED FOR LOGS UP TO 40 CM. DIAMETER MADE IN SPAIN, COMPLETELY REBUILTED WIDTH 650 x 400 MM. DRUM DIAMETER 1300 MM.WITH 3 KNIVES WIDTH 800 MM. MAIN ENGINE POWER 340 H.P. WITH 8 FEED ROLLERS IN THE INLET La80vlq CONVEYOR BELT , OUTPUT SCREW FEEDER, AND CE CERTIFICATE more
1
Trunk diameter: 700(1200)mm max. (before earth-end), trunk length: 3200-6000mm, wood abrasion: 200mm (radial), 72 knifes, milling drive: 110kW. Ms3gv more
3
DATI TECNICI: Chipping machine for professional use, suitable to cut branches up to 220 mm in diameter. This machine is the best solution for chipping large quantities of material and working pieces of a large diameter. Equipped with two hydraulic-powered rollers (diameter: 230 mm), controlled by a No- Stress device, this machine is also provided with a special cutting- and-re ning combined system, so that the homogeneous material resulting from chipping process may be used as fuel for chipped-... more
1

ROPING MACHINE & SPLITTING SAW. RENZO BORGONOVO LCB-600/ 601

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbuqp8ror9 RENZO BORGONOVO LCB-600 ROPE MACHINE & LCB-601 SPLITTING [...] to produce a wide range of spiral wood roping in a continuous length. Square stock is fed into the machine to manufacture spiral twist roping from .3" (3 mm) - 2-3/8" (60 mm). -- A series of sleeve -tube- guides which are easily replaced allow the machine to be setup quickly for each variation in dia. and size of cutters; variable frequency drive on the draw plate controls feed speed... more
1

Guillotines / Shearing EDWARDS Truecut DD 3.25mm x 2500mm Guillotine / Shearing Machine.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 7417900716 Capacity 2500 mm x 3.25 mm Back gauge hand operated rack and pinion Work supports 2 @ 37" long Input 415/3/50 7.5 kw Clamps full length mechnical Bcie82sncy Actuated via wander type foot switch Length 10' 4" Width 3' Height 4' Nett weight actual. 2,300 Kgs / 2.26 Tons more
8

Bed type Correa Milling machine CORREA CF22/25 - 9672001CF22/25

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426-PB Technical features Nedtb Dimensions Table dimensions: 2500 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal... more
12

Strapping Machine Signode LC 1000

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1997
ready for operation (used)
Ser. No. 6101300DEKunststoffbandumreifungsautomat, #454Ser.-Nr. 6101300 Bclpm9ayl7 more
11

Sawing machine Pilous TMJ ARG 130 Complet

Babberich, NetherlandsNetherlands dealership location
6320 km
2015
ready for operation (used)
Technical data Band saw / cold saws / AutomatBandsaw MITRE L / R Gao + R Cutting capacity 90 ˚ Ø130 mm Cutting capacity 90 ˚ Flach180 x 100 mm Section 45˚ Ø115 mm Cutting capacity 45 ˚ Flach115 x 75 mm Bandabmessung1730 x 13 x 0,65 mm Cutting speed M/min4... more
5

Table Type Boring and Milling Machine WOTAN B 80 T

Mönchengladbach, GermanyGermany dealership location
6371 km
used
spindle diameter:80 mm x-travel:1000 mm y-travel:900 mm z-axis table approx.:1120 quill stroke:710 mm spindle taper MT:5 Gvyibfkgc Table area:1060 x 980 mm spindle turning speed range:6 - 710 U/min total power requirement:15 kW weight of the machine ca.:9 t dimensions of the machine ca.:4 x 2,6 x 2,6 m The machine was in a training school and generally overhauled in 2008! 5-axes digital readout make HEIDENHAIN diverse clamping tools and toolholders more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Gwmuwulcq COMIL STAR 200B Shrink Wrap System for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressur... more


chipping m...
daily

New machines via email!

Stay updated!
7
Serial No. 3321 Cutting Length 3000 mm Cutting Width 1500 mm Thickness of Cut 12 mm Plasma Duty Cycle 45 amps @ 50% or 32 amps @ 100% Input 415/3/50 Control Burny DNC 2.8 Traverse speed variable Nedz7 Length 13' 4" Width 7' Height 4' 2" Nett Weight actual. 1150 Kgs / 1.13 Tons more
2

Bed type Correa Milling machine CORREA A30/30 - 6300807A30/30

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-530 Bcid0qc8w8 Technical features Dimensions Table dimensions: 3500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mm Y axis traverse: 1200 mm Z axis traverse: 1000 mm Milling head Head type: Univ... more
12

Strapping Machine Signode KRS-E-200-70/70

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1994
ready for operation (used)
Ser. No. 746367DEUmreifungsautomat, #455Ser.-Nr. 746367 Bclpnir798 more
10

Machine accessories TOS TRENCIN SN / SIU

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Bvm9i2hg more
4
Machine reamers, reamer, reaming tool, pass knife blade Due8di -3 x reamers Diameter ø 37 mm H7 Recording MK3 Number 3 piece -sold Weight 6 kg more
1

SURFACE DEFECT REPAIR MACHINE WINTERSTEIGER TRC-M EASY

North Carolina, United StatesUnited States dealership location
518 km
2017
used
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Gydqcb3cs WINTERSTEIGER TRC-M EASY SURFACE REPAIR MACHINE: -- Specifications:The TRC-M Easy is the entry model in the TRC product line. This semi-automatic machine is the perfect solution for small companies who aim to achieve a superior [...] quality of the repair with a good output and the low investment make the TRC-M Easy the right choice for a large number of customers. -- Applications:Top layers, parquet flooring, solid parquet planks, solid wood b... more
9

Guillotines / Shearing PEARSON 6' x 1/2" / 1828mm x 13mm Guillotine/Shearing Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 4641. Capacity 6' x 1/2" Back gauge Power operated Rapid blade adjustment yes Work supports 2 @ 60" long Squaring arms 1 ' 60" long Input 380/3 /50 15hp approx Clamps 7 x hydraulic Read-out to back gauge imperial Actuated via full length foot treadle Length 8' 10" D2girin Width 7' 6" Height 6' 8" Nett weight actual. 8500 Kgs (8.37 Tons) more
7

Bed type Zayer Milling machine ZAYER KF 5000 - 40142 KF 5000

Burgos, SpainSpain dealership location
6043 km
1990
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-355 Technical features Dimensions Bcid0zuek9 Table dimensions: 5000 x 1000 mm Number of slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4700 mm Y axis traverse: 1000 mm Z axis traverse: 1200 mm Milling head Head type: Univer... more
6

Gear Testing Machine HÖFLER EMZ 2002 / 2602

Monheim, GermanyGermany dealership location
6403 km
1991
used
max. wheel diameter 20 - 2650 mm gear width - mm max. module 32 distance between centres 1850 workpiece weight max. 10.000 kg table diameter 1100 mm Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. - many accessoires - Hardware updated to Windows 7 - gears / straight and helical - internal and external gears Q8cq28rrj - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters) more
7

Machine accessories CBT

Babberich, NetherlandsNetherlands dealership location
6320 km
2014
ready for operation (used)
Gutjicr more
5
Machine reamers, reamer, reaming tool, pass knife blade -31 x reamers B2lu7iaw Diameter ø 20 mm H6 Recording MK2 Number 31 pieces -sold Weight 7.2 kg more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbxuhgabqt WEEKE VANTAGE 200/512 FLAT TABLE MACHINE (W/ATC/BORING,"C" AXIS): -- Specifications:5' x 12' Flat Table "Bridge Gantry" machine with User-Friendly "MATRIX" grooved phenolic vacuum table. -- Working Area:"X" Axis is 145.6" (3,700 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke is 7.3" (185 mm), max. material thickness of 3.9" (100 mm). -- Positioning speed: "X" & "Y" axis 426 FPM (130 MPM), "Z" axis is 65 FPM (20 MPM); machine head travels on ... more
8

Woodworking Machines HARWI 1550 Wall Panel Saw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 5911BH Year of manufacture 2006 Capacity 3400 mm x 1550 mm blade size 250 mm Depth of cut 50 mm input 415/3/50 3 kW Tljfkqs9 Equipment Single bag dust extractor Nett weight actual. 630 Kgs (0.62 Tons) more
6

Bed type Anayak Milling machine ANAYAK VH-2200 - 1998VH 2200

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2200 x 600 mm Traverses of axis X axis traverse: 2000 mm Y axis traverse: 900 mm Z axis traverse: 800 / 700 mm Milling head Head type: Automatic 2 positions (Horizontal/Vertical) Tool clamping sy... more
6
grinding diameter - mm grinding length - mm centre height - mm Control - total power requirement - kW weight of the machine ca. - t dimensions of the machine ca. - m Rcvnfx0 more
8

Machine accessories CBT 200

Babberich, NetherlandsNetherlands dealership location
6320 km
2001
ready for operation (used)
Bvharkws more
5
Doppelschleifbock, bench grinder, grinder stand, stand grinding Bock Engine power 0,5 KW Speed 3200/5200 R/min SIA max Ø 180 mm Operating voltage 380 Volt Dimensions of 500/500/H1550 mm Ccqncop Weight 170 kg more
1

FLAT TABLE MACHINE (W/ATC/BORING) SCM ROUTECH RECORD 125

North Carolina, United StatesUnited States dealership location
518 km
2003
used
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Bbu9heenhm SCMI ROUTECH RECORD 125 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Single Table machine: stationary extruded aluminum table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working field:"X" axis 125" (3,175 mm), “Y” axis 60” (1,524 mm) , "Z" axis stroke is 12" ... more
1

Guillotines / Shearing KINGSLAND 3006 3000mm x 6mm hydraulic Guillotine / Shearing Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1996
ready for operation (used)
Serial No. 3602 Capacity 3000mm x 6mm Nedy9 Back gauge Power Rapid blade adjustment Yes Shadow-line Yes Work supports 2 @ 1500mm Squaring arms 1 @ 1000mm Input 415/3/50 ac 11 kW approx Clamps 14 x hydraulic Read-out to back gauge Metric Actuated via Wander type foot switch Fitted with Finger Guard Length 12'6" / 3.81m Width 6'6" / 1.98m Height 5'6" / 1.68m Nett weight actual. 7 Tons / 7100 Kgs more
10

Bed type Correa CORREA milling machine DIANA-35 - 624057Diana 35

Burgos, SpainSpain dealership location
6043 km
2008
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 3800 x 900 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 3500 Y axis traverse (mm): 1000 Z axis traverse (mm): 1000 Milling head Head type: 2,5º Auto ... more
6

Balancing Machine SCHENCK 210 FBTS

Monheim, GermanyGermany dealership location
6405 km
2009
used
workpiece weight 4 kg workpiece length 200 mm dia. on complete length 200 mm Control electrics - voltage/frequency 400 / 50 V/Hz dimensions 4,1 x 4,2 x 2,5 m connected load 12 kVA flange diameter 250 mm weight 4,5 t Vr2xau Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows more
12

Machine accessories BRISTOL ERCISSON SK50 MAS 403

Babberich, NetherlandsNetherlands dealership location
6320 km
2007
ready for operation (used)
Neddn more
5
Thread-cutting machine, pipe thread cutter -for pipe size of Max 3 inch Qlojeb33u JAWS 2 "-3" inches Pole change-over bar -automatisch opening Pipe cutter -Internal Deburrer Operating voltage 220 volts -Metal frame Weight 130 kg more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ncdml HOMAG BOF 311/38/R OPTIMAT FLAT TABLE MACHINE (W/ATC): -- Specifications:5' x 12' "MATRIX" Flat Table with a 2-zone vacuum table system designed for pendulum processing. -- Axes Travel Range:"X" Axis 169" (4,300 mm), "Y" axis 88.9" (2,260 mm), "Z" axis stroke 21" (535 mm). -- Working Field:"X" axis 149.6" (3,800 mm), "Y" axis 64.5" (1,640 mm) for routing & 59" (1,500 mm) for all units, max. material thickness is 7.8" (200 mm). -- Positioning Sp... more
5

Bevellers GULLCO GBM-28 Bevelling Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. C6UK0903 Maximum material thickness 50 mm, minimum 8 mm Angle range 30 degrees Input 415/3/50 Equipment mounted on wheeled trolley. Length 4'4" Width 2'6" Height 4'6" Nett weight actual. 400 Kgs./0.39 Tons Bcif9lcskf more
23

Bed type Correa Milling Machine CORREA CF22/25 - 9671102CF22/25

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2017 Numerical control: HEIDENHAIN TNC-410 Technical features Dimensions Table dimensions: 2500 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis Bcid2dfj9a X axis traverse: 2500 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Univers... more
6

Balancing Machine CEMB HSB-D

Monheim, GermanyGermany dealership location
6405 km
2008
used
workpiece weight 4 kg workpiece length 200 mm dia. on complete length 200 mm Control Siemens 840 D sl x-axis 120 mm y-axis 120 mm z-axis 300 mm diameter of hob 3,5 oder 4 mm milling drive 0,75 kW hob turning speeds 8000 U/min air pressure - required 7 bar connected load 15 kW electrics - voltage/frequency 400 / 50 V/Hz dimensions m weight 3,5 t Field of application - Automatic balancing machine for measuring and for 8w3lgehis reducing vibrations on turbocompressor assemblies. A specific s... more
10

Machine accessories Schiess

Babberich, NetherlandsNetherlands dealership location
6320 km
1970
ready for operation (used)
Ptqb9y more
5
Diamond core drill, drill -3 x drill -Max drilling power ø 60 mm Max drilling depth 400 mm Drive 1050 W Due7tu -Drehzahlen 1500/3000 U/min Core bit ø 18/24/29 mm -sold Weight 70 kg more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Etkvyqo HOMAG BAZ 20 FLAT TABLE MACHINE (W/EDGEBANDING): -- Specification:Working size "X" Axis is 220.5" (5,600 mm), "Y" axis is 62.9" (1,600 mm), "Z" axis stroke is 200 mm (7.8"), "Z" axis working cap. 120 mm (4.7"); minimum internal radius 30 mm; precisely applies ABS & PVC with max. edge thickness 40 mm & 65 mm without edging. -- Edgebanding Unit:Edgebanding is automatically applied to square or irregularly shaped parts as the CNC manufacturing head... more
7
Serial No. C991106 Rapid blade adjustment Yes G9bz3eqeq Variable rake Yes Work supports 2 @ 1500 mm Squaring arms 1@' 1500 mm Input 15 kw Equipment Spare set of blades more
8

Bridge type Correa CORREA milling machine FP40/50FP40/50

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: Heidenhain TNC-530 Technical features Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Distance between columns: 2500 mm Milling head ... more
6

Balancing Machine BÖHMER MASCHINENBAU HSB

Monheim, GermanyGermany dealership location
6405 km
2009
used
workpiece weight 4 kg workpiece length 200 mm dia. on complete length 200 mm Control Böhmer Turbo Control electrics - voltage/frequency 400 / 50 V/Hz connected load 12 kVA Myhut dimensions 2,6 x x 1,5 x 2,6 m weight 3,2 t Acoustical test stand for checking and then balancing turbocharger fuselage groups. - Chip extraction - Alignment unit - grippers - Milling unit with compressed air milling spindle more
8

Machine accessories Sk50

Babberich, NetherlandsNetherlands dealership location
6320 km
1980
ready for operation (used)
Bch9gczm9m more
4
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Hikt0is3o Dovetail 144 to 184 mm 30 mm high Drawing on the photographs Dimensions 270/130/H195 mm Weight 12 kg more
1

FLAT TABLE MACHINE (W/LOADING, UNLOADING) CNC FACTORY PYTHON XPR

North Carolina, United StatesUnited States dealership location
518 km
2016
used
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Ewtswmz CNC FACTORY PYTHON XPR FLAT TABLE MACHINE (W/LOADING, UNLOADING): -- Specifications:5' x 10' Single Table machine: stationary phenolic table is machined with a square "MATRIX" grid pattern for fixturing parts, -- Working field:"X" axis 122" (3,099 mm), “Y” axis 62” (1,575 mm) , "Z" axis stroke is 12" (305 mm). -- Positioning speed:"X" & "Y" axis 233 FPM (71 MPM), "Z" axis 82 FPM (25 MPM);Closed loop AC Servo drive system drivi... more
15
Serial No. 10839 Spindle diameter 130mm Spindle traverse 1000mm Head stock vertical traverse 2000mm Column horizontal traverse 5600mm and 400mm Cross Traverse Spindle Speeds 4.5-180 rpm Facing & 4.5-900 rpm Spindle Feed rate 0.03-48mm per Minute Spindle bore 50 ISO Facing head diameter 785mm Facing slide cross movement 250mm Rotary table size 2310mm x 2020mm Table load 12 ,000 kgs Table rotates 360 Degrees Table travel 1400mm Input 380/3/50 ac 18.5 kW Fitted with Pendant Control B09zkkz8 Equipm... more
15

Bridge type Correa CORREA milling machine FP30/40FP30/40

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2017/2018 Numerical control: HEIDENHAIN TNC-426 PB Technical features Dimensions Table dimensions: 4000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3500 mm Y axis traverse: 2000 mm Distance between columns: 1740 mm Z axis traverse: 800 mm Milling head ... more
4
Quin Systhems PTSM322 mini Machine Manager, serial number according to the photo, good condition, 100% needed, functional, included with com. photos Bcjwymrpf2 more
17

Milling machines Deckel Maho DMU 50 M

Babberich, NetherlandsNetherlands dealership location
6320 km
1998
ready for operation (used)
Technical data X Achse500 mm Y - Achse400 mm Z - Achse400 mm Mobile stand, bed / LateralVMC / Portal SteuerungsartHeidenhain TNC 124 Table size / Größe700 x 500 mm Table burden in kG200 kg WerkzeugaufnahmeSk40 Spindle9 kW ... more


chipping m...
daily

New machines via email!

Stay updated!

to

to

Edit search
CHIPPING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close