Used Chip Heat for sale (19,981)

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete industrial Aagaard/Finnrose extraction and filtration system, built in 2006, from a wood processing company. The system is designed as a screw filter and includes a complete extraction control system with heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filtration system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Below the discharge, there is a suitable container with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the extraction control system and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw and four cleaning groups, as well as a Schneider-Electric frequency converter for the extraction fan. Technical data Aagaard / Finnrose industrial extraction system / screw filter Year of construction: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for extraction control and heat recovery Frequency converter for main fan Heat recovery / return air system available 6 m³ container on a mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available upon agreement Dimensions Filter tower incl. rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from steel substructure. Podpfsz Ik Atex Ad Rerc Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower incl. substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed no later than July 31, 2027. Dismantling, loading, transport and any customs clearance will be carried out entirely by the buyer at his own expense and responsibility. All necessary skilled personnel, lifting equipment, cranes and means of transport must be organized by the buyer. Inspection possible by appointment. Sale ex works in its current condition. Technical specifications provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 19,500.00 EUR Price net, any statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, heat output: 34 kW / 29,900 kcal/h heating capacity: 29 kW / 25,000 kcal/h air flow rate: 2200 m3/h fan electrical power: 0.15 kW fuel: solid fuel of wood origin Pjdpfx Aj Adtbdod Rerc 170 kg year of manufacture: 2005 CE marking 220 V length: 90 cm, width: 56 cm, height: 155 cm

Condition: used, Knoll TG 40-52/22 Chain-Type Chip Conveyor / Chip Removal Conveyor, Used Equipment Main Data and Specifications: Manufacturer: KNOLL Maschinenbau GmbH (Made in Germany) Type: TG 40-52/22 285-1-0-0-1-0-0-0-0 Year of manufacture: 2023 Order No. (Auftr.-Nr.): 244272 Serial No. (Serien-Nr.): 1637282 Dimensions: Belt size: 380 × 3700 mm Scraper plate dimensions: 380 × 35 mm Scraper plate spacing: 350 mm Peds Agl H Topfx Ad Rjrc Gearbox / Motor Specifications (Knoll AMPH 90L): Power: 2.2 kW (50 Hz) / 2.2 kW – 1.8 kW (60 Hz) Voltage: 230/400 V (50 Hz) / 265/460 V – 230/400 V (60 Hz) Protection rating: IP55 Efficiency class: IE3 Overall Dimensions: Width: 330 mm Depth: 720 mm Height: 1550 mm

Year of construction: 2012, condition: good (used), Schraeder flue gas heat exchanger - used - year of manufacture 2012 Prjdpfx Ae Agnkvjd Rec - operated with a W&P Matador oven - can be used with other bakery ovens - good technical condition - automation system available for the unit - collection from warehouse / shipping option available - price on request

Condition: used, Year of construction: 1997, functionality: fully functional, input thermal power: 125 kW output thermal power: 99 kW heating capacity: 85,000 kcal/h fan motor power: 1.1 kW fan capacity: 6300 m³/h fuel: solid fuel of wood origin weight: 365 kg Prsdpfx Aoz Sam Esd Rec year of manufacture: 1997 voltage: 380 V CE marking

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 257.9 kW (350.65 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,725 kg, input voltage: 400 V, total width: 2,200 mm, total length: 3,700 mm, total height: 2,100 mm, warranty duration: 6 months, heating capacity: 265.2 kW (360.57 HP), AIRCOOLED CHILLER / HEAT PUMP CIAT ILDC 1000V 257.9 KW/265.2 KW Cooling capacity: 257.9 kW / 73.33 tons (12/7 — 35°C) Heating capacity: 265.2 kW / 75.41 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP385KCE-TWD-522 (scroll) + 2 pcs. Copeland ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. Hydraulic module: 2 pcs. water pump Wilo DLP65/130-4/2, expansion vessel. Dimensions: 3.7x2.2x2.1 m Weight: 2725 kg Working hours: 2/2/2/2 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Peds Aa Rfxjpfx Ad Rsrc After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Prsdpfe Aba Rgjx Ad Rsc Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: HZQJ240620819, type of input current: three-phase, overall weight: 3,500 kg, input voltage: 380 V, table width: 2,000 mm, roll diameter: 470 mm, product width (max.): 1,800 mm, working width: 1,900 mm, Hongzhong Sublimation Calender (Rotary Heat Transfer Press) For sale: Professional dye-sublimation/rotary heat transfer machine by Hongzhong Machinery. Designed for heavy-duty industrial operation, offering high efficiency, reliability, and precision. Key Features & Advantages: Heating System: Thermal oil-heated drum system, ensuring uniform and stable temperature distribution across the entire cylinder surface. Control: Intelligent PLC touchscreen interface (WEINVIEW) with multilingual support and an over-temperature alarm. Functionality: Automatic felt/blanket tracking alignment and inverter-driven variable speed control. Safety: 4 emergency stop switches and an automatic cool-down function with auto shut-off once the temperature drops below 80°C. Applications: Ideal for the textile industry – supports both roll-to-roll continuous transfer and piece-by-piece (cut parts) production. Technical Specifications & Equipment: Power Supply: 3-phase (380V) Pjdpfxjz Szc He Ad Rsrc Heating Time: Approx. 45 minutes Equipment: Heavy-duty work table, protective tissue/paper tensioning systems, and finished material take-up/rewind system. Easy to operate and maintain, engineered for long-term commercial use.

Condition: new, Year of construction: 2016, functionality: fully functional, cooling capacity: 28 kW (38.07 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 540 mm, total length: 1,470 mm, total height: 1,610 mm, warranty duration: 12 months, heating capacity: 26 kW (35.35 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 30 28/26 kW Cooling capacity: 28 kW / 7.96 tons (12/7 — 35°C) Heating capacity: 26 kW / 7.39 tons (40/45 —7°C) Year of manufacture: 2016 Options: Hydralic module. Heat pump Hydraulic module: 1 pcs. water pump (EBARA) Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Mitsubishi (scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1,47 x 0,54 x 1,61 m Weight: 281 kg Working hours: 3 h. Condition: New Psdjy Enrrepfx Ad Rsrc CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2019, heating cooling device GWK teco tt 50.08 WT2 300°C oil 8 kW year: 2019 Prodpfx Aj Aba Eqod Rsc price: 4.200 € contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. If you are interested or have any further questions, please do not hesitate to contact us. Pedpfez S U Naex Ad Rjrc

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly, considering its age. The start-up was documented in a video; the video can be sent to serious potential buyers upon request. The existing control cabinet of the extraction system, including the fan control, is also included in the scope of delivery. The control cabinet is complete. Due to the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Podpfsz Ikxzjx Ad Rorc Motor No.: 25787 Power: 11.0 kW / 15 HP Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 min-1 Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse: 35 A Control voltage: 230 V Wiring diagram No.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by appointment. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are carried out entirely by the buyer at his own expense and responsibility. Terms of sale Sale from location. Sale in the existing used condition, as inspected. No guarantee or warranty, as far as legally permissible. Technical data provided to the best of our knowledge; errors and prior sale reserved. Inspection on site possible and recommended by appointment. Selling price: 1,000.00 EUR Price net, any statutory taxes and duties apply. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): Psdpfoz Tdfgex Ad Rsrc On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Prsdsz Eg Sropfx Ad Rsc Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. The boiler has been dismantled and is available immediately. The boiler can be operated with wood chips and pellets.

Condition: new, Year of construction: 2017, functionality: fully functional, cooling capacity: 16 kW (21.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 227 kg, input voltage: 400 V, total width: 700 mm, total length: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 18 kW (24.47 HP), Aircooled chiller/heat pump Blue Box Epsilon Echos 16 kW / 18 kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Psdpfxjx Uyf Ae Ad Rorc - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good Podpfozi Hchox Ad Rorc 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Year of construction: 2026, MDC1500/400 Metal Chip Extractor The MDC1500/400 metal chip extractor is an industrial machine designed for intensive use at grinding and welding stations, as well as wherever effective removal of metal chips and dust is required. This model provides high extraction performance, stable airflow and filtration adapted to the demanding conditions typical of metal production and processing. Key Advantages Predpfxj Afnrme Ad Rec Two-stage filtration – quick, tool-free replacement of the two filter cartridges improves chip separation efficiency. High extraction performance – up to 2,200 m³/h without a bag, ensuring stable operation even when handling large quantities of metal chips. Mobile design – the compact wheeled housing makes it easy to move the unit between workstations. Large collection container – extends operating time without the need for frequent emptying. Dual suction inlet, 2 × 100 mm – allows two machines to be connected simultaneously. Design and Technology The MDC1500/400 is equipped with a high-performance motor operating at S1 100%: 1.5 kW and S6 40%: 2.1 kW, ensuring stable extraction performance even during extended operation. The 400 V / 50 Hz power supply provides reliable operation and consistent impeller performance. The dual-inlet system, 2 × 100 mm, enables efficient extraction from two sources. The optimised suction system design allows an airflow rate of up to 2,200 m³/h without a bag. When operating with a bag or hose, the extraction capacity is 1,500 m³/h, which is still fully sufficient for workstations generating large quantities of metal dust and chips. Precision and Performance The MDC1500/400 metal chip extractor has been developed to maintain a stable, linear airflow. Its robust housing minimises vibrations, while the precisely designed filtration system ensures optimal capture of dust generated during grinding, deburring and welding. As a result, the unit effectively helps keep the workstation clean and improves the working conditions for the operator. Applications The MDC1500/400 is a versatile, professional extraction unit for grinders and machining workstations operating in continuous-duty conditions. It is ideally suited for: grinding tables, welding tables, bench, belt and disc grinders, manual and mechanical processing workstations where metal chips and swarf are generated. Standard Equipment two filter cartridges, large container for metal chips and swarf, compact and mobile housing, dual suction inlet, 2 × 100 mm. Technical Data Parameter Specification Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400 V / 50 Hz Suction inlets 2 × 100 mm Extraction capacity without bag 2,200 m³/h Extraction capacity with bag/hose 1,500 m³/h Dimensions 850 × 670 × 765 mm Weight 72 kg PLEASE NOTE!!! This machine is a returned item; it is second-hand, has dirty filters and experiences vibrations due to the turbine being out of balance. NO WARRANTY AND NO RETURNS!

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Predoz Hw D Uspfx Ad Roc

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Pjdpfxez Ehc Eo Ad Rsrc Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Nominal thermal capacity of 2.900.000 Kcal/h. Effective capacity on exit is 2.400.000 Kcal/h. Prjdjz Sy Rijpfx Ad Rsc Feeding system and container for wood chips were bought in 2012. It has in total worked for 5 years, while feeding system and container or wood chips had worked for 2 months. Feeding system is with screw conveyor.

Condition: ready for operation (used), Year of construction: 2017, Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Podpewykz Sjfx Ad Rsrc Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, LÁNG Scraped Surface Heat Exchanger with Electric Motor Drive, Rotary Heat Exchanger, Scraper Blade Heat Exchanger, Used Equipment Psdpfx Ads Afunus Rsrc Manufacturer: LÁNG Engineering Works Co., Budapest, Hungary Type / Professional Term: Scraped Surface Heat Exchanger / Scraped Wall Heat Exchanger Serial No.: 11423 Year of Manufacture: 1980 Overall Dimensions (Width x Depth x Height): 2480 x 600 x 1300 mm Weight: 354 kg Heating Space / Jacket Working Pressure: 3 kp/cm² Heating Space / Jacket Testing Pressure: 4 kp/cm² Liquid Space / Process Fluid Zone Working Pressure: 5 kp/cm² Liquid Space / Process Fluid Zone Testing Pressure: 6 kp/cm² Internal Structural Elements and Drive: Scraper Blade Screw / Scraper Augering Element Drive: Electric motor drive with V-belt transmission

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Pjdpozt Ip Rsfx Ad Rjrc Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor Podpfxsz D Uvps Ad Rjrc • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 1,250 mm, total length: 3,540 mm, total height: 2,200 mm, warranty duration: 6 months, heating capacity: 184 kW (250.17 HP), Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Prjdjyzzqtepfx Ad Rec Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.