Used Wood Chip Heating for sale (23,848)

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Ffodpfeyhlrmjx Afneu

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. Fjdpfx Afoxwhw Aenefu BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Fjdpfsyalblox Afnjfu

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Ffsdpfx Aevvmvfsfneu

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system Ffodpfxow Rpdrs Afnju 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Fjdpfx Asxciidofnefu

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Fsdpfx Aev Ngq Aofnefu already disassembled complete with boiler, stocker unit, and discharge system

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning Ffedsttqd Nepfx Afnsu • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space Ffedpowahhvefx Afneu 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance Fjdpfx Afemuzq Esnjfu — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For sale: KWB TDS Powerfire 45–150 kW Biomass Boiler – Versatile Wood Chip and Pellet Heating System The KWB Powerfire TDS 45–150 kW is a flexible and powerful biomass boiler – ideal for apartment buildings, commercial properties, or agricultural applications. Suitable for wood chips and pellets, it impresses with fully automatic operation and high efficiency across the entire output range. --- Key Features: Ffjdpfxshikbuo Afneu Fuel: Wood chips / Pellets Power: 45–150 kW Fully automatic system with modulating output adjustment Industrial-grade, low-maintenance construction KWB – Austrian quality for commercial biomass heating PRICE: 7,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) --- Top Heating Systems – ProfiKazán Smart biomass heating solutions from leading Austrian manufacturers.

Condition: excellent (used), Wood chip silo with rotary extractor: - 56 panels 1500 x 3000 mm in 2.5 mm thick galvanized steel, distributed over 4 levels, supplied with 56 reinforcements and 42 junctions, bolted assembly, Fjdpfx Asyhpzfsfnjfu - Ø 6250 mm, - Height 12 m, 350 m3 volume, - Self-supporting roof with safety railing, - Caged ladder with a resting platform at 6 m, - 12 Atex vents, - 1 inspection door on the roof, - 1 Ø 480 mm inlet on the roof, - 1 discharge door 1200 x 2000 mm - 1 DENIS ECR 240 rotary extractor, all disassembled and palletized. OR - Silo without extractor for €30,000 excl. VAT - DENIS ECR 240 extractor for €15,000 excl. VAT

Year of construction: 2003, condition: used, wood chip sieve Ffodex Ta Nfspfx Afnju

Year of construction: 2024, condition: new, Selling a WLO 20 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 20.00 kW maximum heating output: 23.00 kW / approx. 230 m2 in set: force axial fan speed: 1380 rpm and capacity: 2910 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible fireplace made of 5mm thick boiler plate large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Furnace lining: 12 firebricks replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 790mm x Overall Height: 1030mm Oven dimensions: Width: 380mm x Depth: 450mm x Height: 500mm Upper door dimensions (sheet 3 and 4 mm): width: 365 mm x height: 215 mm Bottom door dimensions (3 & 4mm sheet metal): Width: 365mm x Height: 295mm Top Loading Port Dimensions: Width: 285mm x Height: 195mm Lower Loading Port Dimensions: Width: 285mm x Height: 265mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 120mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Ffjdpoixun Tofx Afneu Material: steel (propeller + housing) Diameter: Ø 300mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1380 rpm Air flow: 2910 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Ffsdpfxoixup Aj Afnsu Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net

Year of construction: 2024, condition: new, Sell ​​a new WLO -15 KW, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 12.00 kW maximum heat output: 15.00 kW / approx. 150 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 1460 m3/h Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg replaceable large cast iron grate covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure Fedpfx Afjixul Hsnsfu large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.30A Speed: 1400 rpm Air flow: 1460 m3 / h Safety: CE mark + protective net

Year of construction: 2023, condition: new, WLO 45 KW Hot air stove ,wood stove,Heating Thanks to the powerful combustion chamber, the stove can burn up to Pick up 120 cm long pieces of wood! Furnace parameters Nominal heating output: 49,5 kW approx. 450 m2 including: axial fan with speed: 1380 rpm and output: 5500 m3/h Included in delivery: Controller to regulate the operation of the SCL-1515 fan innovative design of the air jacket that completely surrounds the cooker for maximum efficiency Indestructible range cooker made entirely of certified boiler plate p265gh and 16M06, thickness #6mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 320 kg Gross weight: 340 kg Grid: 1000 x 250 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look solid construction huge combustion chamber 120 x 80cm! large loading door User Guide Yield: 75.00% CO emission at 13% O2: 1.20 m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20%* mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications Fodsixuq Dspfx Afnofu CE mark: YES / affixed to the rating plate Compliance with standard: EN13240:2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 800mm x Overall Depth: 1600mm x Overall Height: 1200mm Cooker dimensions: Width: 800mm x Length: 1200mm x Height: 800mm Upper door dimensions (3 & 4mm sheet metal): Width: 520mm x Height: 470mm Bottom door dimensions (3 & 4mm sheet metal): Width: 360mm x Height: 150mm Top Loading Port Dimensions: Width: 460mm x Height: 460mm Bottom opening dimensions: Width: 360mm x Height: 130mm Grate Dimensions: Width: 250mm x Depth: 1000mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 200mm Foot height: 140 mm

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Fsdpsixupmsfx Afnjfu Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Year of construction: 2023, condition: new, WLO 4 35 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 30.00 kW maximum heat output: 35.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 3500 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Furnace lining: 28 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 950mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 580mm x Height: 560mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Fsdpjixupujfx Afnsfu Diameter: Ø 400mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 3500 m3 / h Safety: CE mark + protective net

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency Ffjdpfx Aoin Ewljfnsu - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, first registration: 07/1994, next inspection (TÜV): 05/2026, color: white, overall weight: 18,000 kg, front tire size: 255/70/22.5, empty load weight: 6,400 kg, axle configuration: 2 axles, suspension: air, loading space volume: 45 m³, tire size: 255/70/22.5, Equipment: ABS, lighting, Freudenau volume tipping trailer, 2-side tipper, left side with pendulum doors, right side fixed, approx. 45 m³, platform, sliding tarpaulin, SAF axles, 70% tires, German trailer from first owner. Sale only to business customers and with exclusion of any warranty. Loading possible. Ffsdox Ncrhspfx Afnou

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Ffedjw Uf S Hjpfx Afnsu

Condition: good (used), Year of construction: 2010, functioning wood gasification plant with 40 kw electric power and 80 kw heat output Fodpfxsiggpbj Afnefu

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Fedpfx Afsr R Ewljnofu Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included) Fedpfx Afowp Rqfsnsfu