Used Chip Heat for sale (21,176)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Lsdexciidepfx Agzeak

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: Lasdpfx Aoxwhw Asgzek FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Laedpsttqd Nofx Agzek — Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Laodpfx Aevvmvfsgzjk

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity Laodpfev Ngq Aox Agzsk already disassembled complete with boiler, stocker unit, and discharge system

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: Lasdpfx Agemuzq Ejzjk • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For sale: KWB TDS Powerfire 45–150 kW Biomass Boiler – Versatile Wood Chip and Pellet Heating System The KWB Powerfire TDS 45–150 kW is a flexible and powerful biomass boiler – ideal for apartment buildings, commercial properties, or agricultural applications. Suitable for wood chips and pellets, it impresses with fully automatic operation and high efficiency across the entire output range. --- Key Features: Lodpfehikbusx Agzjak Fuel: Wood chips / Pellets Power: 45–150 kW Fully automatic system with modulating output adjustment Industrial-grade, low-maintenance construction KWB – Austrian quality for commercial biomass heating PRICE: 7,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) --- Top Heating Systems – ProfiKazán Smart biomass heating solutions from leading Austrian manufacturers.

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 Lsdpfx Agowahhvezjak The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: good (used), For sale: Fröling Turbomatic TMC 35 kW – Automatic Biomass Boiler for Wood Chips, Pellets, and Firewood The Fröling Turbomatic TMC 35 kW is a compact, fully automatic biomass boiler – ideal for agricultural operations or small commercial facilities. — Technical specifications: • Output range: 10.5 – 35 kW • Efficiency: very high, thanks to automatic combustion control • Fuels: wood chips, sawdust, pellets (optionally also firewood up to 35 cm with special grate) • Boiler water content: 114 liters • Weight: approx. 600 kg • Power supply: 400 V / 50 Hz, fuse protection 20 A • Operating temperature: up to 95 °C • Minimum return temperature: 55 °C • Operating pressure: up to 3 bar Lsdpew Naqgjfx Agzsak • Control system: Lambdatronic with oxygen sensor for optimal combustion — ⚙️ Additional features: • Multi-pass heat exchanger with automatic turbulators • Large-volume, refractory combustion chamber with insulation • Independent drives for optimal adjustment to fuel type and moisture content • Emergency operation possible with firewood — Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) Price: EUR 5,900 net

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: Ledpfxex Eg Ups Agzeak 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, total length: 5,000 mm, total width: 211 mm, total height: 240 mm, Used Heat and Control batch fryer 180 lbs from 1985, takeaway conveyor, auto stirr system. Rebuilt in 2019 with: new control system with PLC, new electric motors, Weishaupt burner (with higher output available if needed) from 2007 with new burner control. Hood and all controls included. Used by seller between 2020-2025. Now deinstalled and ready for shipment. Lajdox H Iqkspfx Agzsk

Condition: used, Electrically heated tempering furnace with protective atmosphere Type: TSK-8-10-12-80 Temperature: max. 950°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Ledpfxsxcphms Agzoak Heating power: 80 kW Atmosphere fan: 4,0 kW

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 308.3 kW (419.17 HP), type of cooling: air, overall weight: 2,899 kg, total width: 2,200 mm, total length: 4,600 mm, total height: 2,650 mm, warranty duration: 6 months, heating capacity: 333 kW (452.75 HP), Aircooled chiller/Heat pump Systemair SYSCROLL.330.AIR 308.3/333 kW Cooling capacity: 308,3 kW (12/7 — 35°C) Heating capacity: 333 kW (40/45 —7°C) Year of manufacture: 2018 Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Copeland (scroll) Number of fans: 8 pcs. Lodpsxxkflofx Agzeak Type of refrigerant: R410A Dimensions: 4.6 x 2.2 x 2.65 m Weight: 2899 kg Condition: Excellent, Outlet

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor Lajdpfxjw U A E Rj Agzek - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. More information to follow.

Condition: used, functionality: fully functional, machine/vehicle number: 1591, Industrial flatbed heat press COMAS Tipo 85, suitable for sublimation printing, lamination, or thermal transfer on textiles, films, and composite materials. The machine was purchased but never put into operation. It has been stored in a dry environment and is in good physical condition. Equipped with VAHLE KEK 5/60 power feed system (industrial conductor rail). Lsdpoxryylsfx Agzeak Heavy-duty construction, ideal for workshops or small production facilities needing reliable thermal pressing capacity.

Condition: excellent (used), A good used Saxon 2 Hot Air Heat Sealing Machine on a Stainless Steel height adjustable column with a stainless steel mobile trolley - right to left handing Lodpfx Agjwtgt Dszsak

Condition: like new (used), Year of construction: 2023, operating hours: 600 h, functionality: fully functional, One as new 120kw wood chip boiler and complete fuel feed system. Has only run for short period of time and in excellent condition. Comes complete with ultra-modern control system. Lsdewhc R Uspfx Agzoak

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: #1913, Fully functional infrared curing oven, with automated conveyor available. Lsdpfx Aexr T Ipsgzoak 40' / 12m Infra red powder curing oven with zone control. 6 heating zones with 2 height levels; total 186 heating elements. PLC with 7" Color touchscreen. 8 cooling blowers 1-2,000 cfm exhaust. Conforms to UL STD 499 & UL STD 508A. 480V 3ph. Webb type conveyor from Frost France up to 1.83m / min speed, and load up to 200kg.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 61.6 kW (83.75 HP), type of cooling: air, overall weight: 491 kg, total width: 1,100 mm, total length: 2,110 mm, total height: 1,330 mm, warranty duration: 6 months, heating capacity: 62.2 kW (84.57 HP), Aircooled chiller/Heat pump CIAT ILD 0240R 0021 61.6 kW/62.2 kW Cooling capacity: 61.6 kW / 17.52 tons (12/7 — 35°C) Heating capacity: 62.2 kW / 17.69 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss DSF130A4ACA (scroll, soft starter) Type of refrigerant: R32 Number of fans: 1 pcs. Lsdpfx Aext D Ntegzjak Dimensions: 2.11x1.1x1.33 m. Weight: 491 kg. Working hours: 372/370 h. Condition: Outlet

Year of construction: 2013, condition: excellent (used), Heat exchanger / SPIRAFLO. Type - XTSD 104/64-6-304/316-C Lsdpfxjhtuu Ue Agzsak Is made in 304 and 316 steel. Year of manufacutre - 2013. Empty weight - 2.000kg. Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm.

Year of construction: 2018, condition: ready for operation (used), A complete Heat and Control line for frying extruded snacks is available. Components: Product feeding system, vibration system for product feeding and particle removal, deep fryer, filter for removing burnt particles, oil heating system with burner, oil tank, oil return system, chimney, control cabinet. Frying capacity: 500kg/h, total system length: approx. 10000mm, total system height: approx. 3500mm. Including spare parts. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Lasdpswdwy Nefx Agzsk

Condition: not inspected (used), Used Linear Oven Electric power supply Belt width: 600mm Manufacturer: Heat and Control Model: 25.21 Lodpfx Aotr Du Sogzjak Height: 2350 mm Width: 1600 mm Length: 9500 mm Electric power supply: 400V 50Hz 3N Total power: 150 kW

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of cooling: air, overall weight: 604 kg, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Lodpfew Hzyxjx Agzoak Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Good

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of cooling: air, overall weight: 433 kg, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Ledpfx Aevmzrisgzoak Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 624 kW (848.40 HP), type of cooling: air, overall weight: 4,780 kg, total width: 2,300 mm, total length: 6,800 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 674 kW (916.38 HP), Aircooled chiller/Heat pump Daikin EWYQ630F 624 kW / 674 kW Cooling capacity: 624 kW / 177.4 tons (12/7 — 35°C) Heating capacity: 674 kW / 191.6 tons (40/45 —7°C) Year of manufacture: 2017 Options: Heat pump. Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Lajdpjvl E A Asfx Agzok Compressors: 6 pcs. Copeland ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Number of fans: 14 pcs. Daikin YDK1200-6AD Hydraulic module: 1 pcs. water pump LOWARA PLM132B14S3/3110 (frequency converter) Dimensions: 6.8x2.3x2.4 m Weight: 4780 kg Condition: Excellent