Used Chiron Machining Center for sale (91)

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Hodpfezb D Rnjx Aqrsp

Condition: excellent (used), Year of construction: 2015, operating hours: 14,000 h, Chiron Mill FX 800 machining center with 148-position background magazine TECHNICAL DATA Travel, X-axis: 800 mm Travel, Y-axis: 630 mm Travel, Z-axis: 550 mm Swivel axis: +- 120 ° Rotary axis: 360° Rapid traverse speed, X-axis: 60 m/min Hodpfetvz Azsx Aqrep Rapid traverse speed, Y-axis: 60 m/min Rapid traverse speed, Z-axis: 60 m/min Spindle, max. torque: 180 Nm Spindle power: 17.0 - 47.2 kW Spindle, speed: 12`000 rpm Tool holder: HSK-A 63 Rotary table, diameter: 280 mm Thread and fitting hole pattern M16 x 15 H7 X 50 Load capacity: 320 kg SCOPE OF OFFER U.A: (list not exhaustive): Chiron machining center, Year of construction: 2015 Knoll chip conveyor 750 K-1/150 BMF TPF 350S high-pressure pump Renishaw RLP40Q touch probe Receiver: Renishaw RMI-Q Mechatronic flow sensor SB0500 Background magazine, 148-fold Operating documentation Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 179-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc OMC, total height: 3,040 mm, total length: 3,920 mm, total width: 2,400 mm, table width: 550 mm, table length: 2,700 mm, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,500 rpm, coolant supply: 30 bar, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, input voltage: 400 V, FZ 22 long-bed, fully functional and still in daily operation. The machine is being replaced and can be inspected at any time during regular opening hours. Hedpfey R D Dusx Aqrsp

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Hjdoy R Dqhjpfx Aqrjp

Condition: defective spare-parts repository (used), functionality: not functional, controller manufacturer: Siemens, table width: 470 mm, table length: 990 mm, overall weight: 5,500 kg, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Note: The machine is defective. The control system does not power up, so it requires repair or can be used as a source of spare parts. Otherwise, the machine is in good mechanical condition. TECHNICAL DETAILS Spindle speed: 10,500 rpm Hedjy Ni Agepfx Aqrep Table length: 990 mm Table width: 470 mm MACHINE DETAILS Control manufacturer: Siemens Machine weight: 5,500 kg

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 332-24, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, spindle speed (min.): 17,500 rpm, spindle nose: HSK63, Equipment: documentation/manual, The Chiron DZ15WM HS is also available as a retrofit project or can be sold as is, as a used machine. The retrofit project can be carried out using SIEMENS ONE. As part of the package, we can provide a fixture for your workpiece and an NC program. The photos show the machine in its current condition. General Manufacturer: CHIRON-WERKE GmbH & Co. KG, Tuttlingen Model: DZ15WM HS Type: 5-Axis Horizontal CNC Machining Center Configuration: Dual Spindle, Two Work Stations Year of Manufacture: 2013 Serial Number: 332-24 CNC Control: Siemens Sinumerik 840D/DE Powerline Spindle & Performance Spindle Interface: HSK-A63 (DIN 69893), Dual Spindle Hedpfx Asy S N Dpoqrep Max. Spindle Speed: 17,500 rpm Simultaneous Axes: 5 Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Positioning Tolerance: ±0.01 mm Travel & Work Envelope X-Axis Travel: 630 mm Y-Axis Travel: 400 mm Z-Axis Travel: 360 mm Tool System Tool Magazine: 2 × 32 chain-type positions (64 total) Max. Tool Weight: 5 kg (10 kg at reinforced positions) Max. Tool Diameter: 125 mm (140 mm at full magazine) Max. Tool Length: 300 mm Electrical & Hydraulic Systems Installed Power: 58 kVA Operating Voltage: 400 V / 84 A / 50–60 Hz Hydraulic System: FMB Blickle – Rexroth Bosch / Moog Hydraulic Pressure: 250 bar Hydraulic Spec: ISO VG 46, 160 L/min, 4 L tank Cabinet Cooling: Rittal TopTherm SK 3305542 Dimensions & Weight Length: 2,500 mm Width: 2,900 mm Height: 2,800 mm Machine Weight: 10,800 kg

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Hodpfeyxn Hcex Aqrjp

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 332-22, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: SIEMENS 840D, rotational speed (max.): 17,500 rpm, spindle nose: HSK63, General Manufacturer: CHIRON-WERKE GmbH & Co. KG, Tuttlingen Model: DZ15WM HS Type: 5-Axis Horizontal CNC Machining Center Configuration: Dual spindle, two work stations Year of manufacture: 2014 Serial number: 332-22 CNC control: Siemens Sinumerik 840D/DE Powerline Spindle & Performance Spindle interface: HSK-A63 (DIN 69893), dual spindle Max. spindle speed: 17,500 rpm Simultaneous axes: 5 Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min Hsdpfx Aqsy R Eywerop Positioning tolerance: ±0.01 mm Travel & Work Envelope X-axis travel: 630 mm Y-axis travel: 400 mm Z-axis travel: 360 mm Tool System Tool magazine: 2 × 32 chain positions (64 total) Max. tool weight: 5 kg (10 kg at reinforced positions) Max. tool diameter: 125 mm (140 mm with full magazine) Max. tool length: 300 mm Electrical & Hydraulic Systems Installed power: 58 kVA Operating voltage: 400 V / 84 A / 50–60 Hz Hydraulic system: FMB Blickle – Rexroth Bosch / Moog Hydraulic pressure: 250 bar Hydraulic spec: ISO VG 46, 160 L/min, 4 L tank Cabinet cooling: Rittal TopTherm SK 3305542 Dimensions & Weight Length: 2,500 mm Width: 2,900 mm Height: 2,800 mm Machine weight: 10,800 kg Transport: Standard flatbed truck

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Hjdpoyt I Uhsfx Aqrjp Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min Hsden D D Nhepfx Aqrep tool attachment SA40 2 UNITS AVAILABLE

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Hsdpfxjyn Ncps Aqrep Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Hsdpfx Aqjquhbgjrep Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel Hsdsyhnfcspfx Aqrsp

Condition: good (used), Year of construction: 2000, Chiron FZ 12 W pendulum table Year of manufacture: 2000 Control: Siemens Sinumerik 840 D travel: X 550 / Y 300 / Z 425 spindle speed: 11000 / min Hsdpfxemp T Nie Aqrjp spindle mounting: SK 30 Power: 10 kVA weight: 4000 kg Condition: Used, ready for operation, without rifle power

Condition: ready for operation (used), Year of construction: 1991, Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible. Hodpfx Aqoywlp Sjrep

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, For sale is a fully functional machining center of the Chiron type FZ 08 W. Hsdpfx Aqjx Swg Sjrjp

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Hjdexqmwbepfx Aqrsp Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Steuerungsmodell: 21m 3x / 2x 21iM Hsdpjywmzijfx Aqrjp Kühlmittelzufuhr:1 bar Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: excellent (used), Year of construction: 2006, HEIDENHAIN iTNC 530 control Working travels 550 x 400 x 360 mm Hjdpox R Uxpjfx Aqrep Spindle taper HSK 63 Spindle speeds -20'000 rpm Tool magazine with 48 Pos. Swivel rotary table with B- + C-axis Roboter for workpiece loading EROWA ERS 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 tool holder - The machine is currently idle. - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. The machine can be inspected under power at any time. Hedpfxoywpa Is Aqrop

Condition: good (used), Year of construction: 2007, functionality: fully functional, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul in 2017 Operating hours approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115°, water-cooled motor spindle, 15,000 rpm. Axes travel X 450mm / Y 270mm / Z 310mm Rapid traverse in X / Y / Z: 75 m/min. / Acceleration: X 1g / Y 1.5g / Z 2g 40 tool stations HSK-A 40, chip-to-chip time 2.6 sec. (vertical, to DIN standard) Additional equipment: Preparation for bar machining Rotary table package AWU 160 with D105mm (positioning axis), Hainbuch Spanntop collet chuck D100, additional equipment for 6th side machining Part removal handling and discharge unit for finished parts, bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine prep for high-pressure ICS 70 bar (vario-valve), fixture flushing Scraper-belt chip conveyor with discharge height 1050 mm, vacuum rotation filter VRF 400 ltr., manufacturer KNOLL MAHLE dual change-over filter Electrical cabinet cooler, signal light Tool life monitoring, tool breakage control, Single F500 3D probing system, Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) Hsdpfx Aeypbmceqrep HSK-A40 tool holders Spare parts for this machine type including special operating materials Note on machine concept: Unmanned complete machining 24/7 of cubic components. Material supply via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of 4 surrounding faces via vertical milling spindle. Machining of the end face (5th side) horizontally with swivel head. Clamping of workpiece via clamping stock, separating workpiece and 180-degree rotation, machining of the 6th side again horizontally with swivel head. Removal handling and discharge unit into parts buffer. Note on machine condition: The machine was factory overhauled and technically updated in 2017 by Chiron (CMS). The last spindle replacement was carried out in September 2025. The last manufacturer service was in October 2025 (major annual maintenance, 4,000 h). From new until today, the machine has been continuously maintained, repaired, and kept up-to-date by the manufacturer through a full-service contract (preventive maintenance).

Condition: used, Year of construction: 2014, x-travel 550 mm Hodpetycrnsfx Aqrsp y-travel 320 mm z-travel 420 mm

Condition: ready for operation (used), Year of construction: 2007, A CNC machining center Chiron factory-overhauled by the manufacturer in 2017 is available. Travel path X/Y/Z: 450mm/270mm/310mm, NC head swivel: -20°/115°, tool positions: 40, tool holder: HSK-A40, speed: 15000rpm, control: Siemens 840D, operating hours: approx. 22500h. Including rotary table package AWU 160 with D105, collet chuck, handling, bar feeder Irco SiMag 100.1-3000, through-coolant preparation, scraper belt conveyor (1050mm), duplex filter Mahle, vacuum rotary filter Knoll VRF 400, approx. 500 tool holders HSK-A40 and various spare parts. Documentation vorhanden. An inspection on site is possible. Hedpfx Aoyn Nz Esqrop

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Hjdpfx Ajwpcfueqrep Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM, year 1997, are for sale: Hedoxdhp Ejpfx Aqrjp 9 pcs. tool arms 1 pc. spindle 1 pc. spindle motor