Used Circular Resaw for sale (1,596)

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Pgsdpfx Ajidunvsazsr Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V Podeb Sciaspfx Aazsgr space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Pgjdpfx Aocnxa Njazor Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: good (used), Year of construction: 1987, machine/vehicle number: Kahny, Fully working Pgedsxp N I Hopfx Aazor

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T211178, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, cutting length (max.): 3,200 mm, main saw diameter: 315 mm, Equipment: scorer, F25 Basic equipment - Manual height and tilt adjustment of saw blade 0 – 46°, with digital display - Drive power 4 kW (5.5 HP), single speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Mitre fence, cross cuts up to 3,450 mm - Max. saw blade diameter 315 mm, max. saw blade projection 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 2 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,410 mm Pgodpfowwt Ayjx Aazsr - Large extraction hood (PSV) - Basic scorer with LED lighting

Condition: new, Year of construction: 2025, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, cutting length (max.): 3,200 mm, Equipment: scorer, F25 basic configuration - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package Type 4 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting Pgedpfx Aewwuamsazsr

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Podpfxjww Nd Te Aazsgr Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern weight of the machine ca. 1,4 t Psdow Sygmopfx Aazegr

Condition: like new (used), Kaltenbach saw for sale! Ideal for metalworking outdoors. This robust machine is ready for immediate use and perfect for precise cuts. It shows slight signs of use but works flawlessly. Take advantage of this opportunity to upgrade your workshop! Viewing possible by appointment. A must-have for any craftsman! Podsyuxuhspfx Aazegr

Condition: refurbished (used), TECHNICAL DESCRIPTION KKS 450 KKS 450 Semi-automatic, hydraulic universal circular saw with rotary table for mitre cuts SAW BLADE Segmented saw blade Blade mount according to DIN 8576 ☐ 400 x 4 ☒ 450 x 4 mm 50/4 x 14/80 mm WORKING RANGE Round material 90°/45°: 125 / 150 mm Square material 90°: 115 / 140 mm Pjdpox N Ncasfx Aazsgr 45°: 110 / 130 mm Flat material 90°: 305 x 40 / 330 x 40 mm 45°: 235 x 30 / 250 x 40 mm U-profiles upright 90°/45°: 120 x 55 / 140 x 60 mm U-profiles horizontal 90°: 240 x 85 / 280 x 95 mm 45°: 180 x 70 / 220 x 80 mm Cut lengths from 10 mm DRIVE POWER Saw motor: 1.8 / 2.7 kW Hydraulics: 1.5 kW Coolant pump: 0.1 kW CUTTING SPEEDS (Standard) 11.5 / 23, 13 / 26 m/min or 10 / 20, 11 / 22 m/min or 13 / 26, 15 / 30 m/min SAW BLADE FEED Continuously adjustable as per table: 0 - 1,000 mm/min Blade rapid return: 3,300 mm/min ELECTRICAL CONNECTION TN-S system – 3 phases, neutral, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Pgedpfsgwt Rvex Aazer

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! Pgedpfx Ajgwt R Dsazjr It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Pjdpey N Rg Tofx Aazjgr Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: good (used), Circular platform for horizontal and vertical mounting. Pgsdpfxjzhf Ade Aazjr Diameter: 400 mm.

Condition: new, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, Crosscut Saw AS Saw blade diameter up to 1,000 mm. Powerful saw motors. Pneumatic material clamps. Podpfx Ajyxln Rjazsgr Two-hand safety operation. Coolant system. Protective cover. Optional with hydraulic saw feed and material clamp. Optional with length measuring system or automatic positioning system. Version available as a saw-drilling or saw-punching automatic machine upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual Psdpfx Aaeuh R R Eozegr - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Pjdpfx Aaet Hwrnjzjgr Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: excellent (used), Year of construction: 1981, Dorries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany Pgjdpfx Aajkwcpxszsr - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2: 5.100 - Max. turning height : 2.650 - Stroke Tool holder : 1.250 - Crossrailadjustment : 1.500 - Table load : 60.000 - Tool shank size : 40 x 40 - Max. cutting power : 75000 - Max. torque on table : 60000 - Power main motor : 75 kW / 415 - Speeds 1 / 2 / 3 Range: 0,8 – 100 - Feeds Vario : 0,1 – 1.000 - Rapid Feed : 6.000 - Dimensions: 9,30 X 6,10 X 6,30 X 60 - CNC Siemens Sinumriek System 8 - Tool changer 16 positions - SCR Feed drives / each Axis own - Ballcrews + Slide roller guideways - Displaceable table hydraulic / manuel - Circular interpolation Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: Pgsdsx H Uctspfx Aazor max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D Pgodox E Eihepfx Aazer WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, Year of construction: 2005, saw blade diameter 450 mm cutting diameter 150 mm stroke 1300 mm cutting range 140x140 mm Roller conveyor 6000x350 Roller conveyor 4500x700 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Pedeyutvgjpfx Aazsgr If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77850 € 1471.37 € 460 mm 1000 mm 56 mm 230 mm 350 mm D1-6 1/20 MK 3 33 - 3100 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6-40%) kW 0.02 mm 0.01 mm ISO3655 2840 mm 1905 mm 2235 mm 2900 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software With precision bearings ensuring spindle runout of less than 0.005 mm, for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis. 2-axis AC servo motors 20-160 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Pgodpfx Aaezbu U Rszsr Fully enclosed splash guard. Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret(VDI, slot type o BMT version) Chip conveyor High-pressure coolant pump ALTERNATIVE: FCL-1860 variant with 1500 mm centre distance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 95950 € 1813.46 € 630 mm 2000 mm 85 mm 400 mm 350 mm D1-8 1/16 MK 3 37 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13.5kW (S1 / S6 40%) kW X: 0.02 Z: 0.04 mm X: 0.01 Z: 0.035 mm ISO3655 3840 mm 1905 mm 2235 mm 4200 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Podjzcqx Uopfx Aazjgr Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret (VDI, slot type o BMT version), optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Further options on request ALTERNATIVE: FCL-2540 variant with 1000 mm centre distance FCL-2560 variant with 1500 mm centre distance

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 Pgodozquw Aopfx Aazjr N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: used, total length: 1,850 mm, total width: 1,050 mm, total height: 1,400 mm, Colour: Grey Weight: 500 kg Pulp saw Harwi 130 45 degrees  5,5kW - Documentation available: No - CE certificate present: No - Serial number: 130 S - Main motor power [kW]: 5.5 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 400 - Max. saw blade diameter [mm]: 450 - Table length [mm]: 1500 - Table width [mm]: 1050 - Min. adjustable angle [°]: 0 - Max. adjustable angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Power [kW]: 7.3 - Transport dimensions: 1850mm x 1050mm x 1400mm (l x w x h) Pgedpfxezrm S Ij Aazjr - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels