Used Circular Saw Blade Sharpener Machine for sale (66,525)

Year of construction: 2023, condition: new, machine/vehicle number: 23-04-35-001, F 25 Version 3 Manual height and swivel adjustment of the saw blade from 0 to 46°, with digital display. Motor 5.5 kW, 2 speeds, 3,600 / 4,200 rpm. Double roller carriage, 3200 mm, Parallel fence including fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting length up to 3450 mm, Basic scoring unit with LED light Saw blade diameter max. 315 mm, saw blade projection max. 104 mm, Cutting height max. 100 mm, at 45° max. 70 mm, Hedpof A Ehtofx Aqqep Large dust extraction hood (PSV), including optional front support roller, available immediately from stock in Seevetal, subject to prior sale excluding transport, assembly, and instruction.

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Hjdpfx Aqswz Nbaeqep Maximum cutting height with 450 mm saw blade: at 90°: 155 mm, at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Extraction ports D = 120 + 80 mm Mitre fence extendable to 3,600 mm Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment Motors: Main saw: 5.5 kW / 7.5 HP, Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminium, including high-precision linear guide made of hardened and ground steel Sliding carriage lockable in any position Saw blade guard with swing-away device Outrigger arm with adjustable mitre fence and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices in accordance with CE standards As inspected, ex location Seevetal, without pre-freight, freight, or commissioning. Subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T211178, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, cutting length (max.): 3,200 mm, main saw diameter: 315 mm, Equipment: scorer, F25 Basic equipment - Manual height and tilt adjustment of saw blade 0 – 46°, with digital display - Drive power 4 kW (5.5 HP), single speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Mitre fence, cross cuts up to 3,450 mm - Max. saw blade diameter 315 mm, max. saw blade projection 104 mm - Cutting height 100 mm, 70 mm at 45° Hjdjwwt Ayepfx Aqqjp - Machine height 880 mm Equipment package type 2 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,410 mm - Large extraction hood (PSV) - Basic scorer with LED lighting

Condition: new, Year of construction: 2025, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, cutting length (max.): 3,200 mm, Equipment: scorer, F25 basic configuration - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm Hjdewwuamspfx Aqqjp - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package Type 4 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T68109, functionality: fully functional, power: 4 kW (5.44 HP), cutting width (max.): 1,000 mm, saw blade diameter: 315 mm, cutting length (max.): 3,200 mm, F25 basic equipment Hsdpfowwv Rmjx Aqqsp - Manual height and tilt adjustment 0–46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 6 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,000 mm - Riving knife with extraction - Preparation for scoring unit

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: GM010.0310, functionality: fully functional, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,300 mm, Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Hodpfx Asw I Rtcoqqep Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, cutting length (max.): 2,900 mm, Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Hedpfxowynhpj Aqqep Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Hsdpfsxc Uq Hex Aqqep Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: new, Year of construction: 2025, F 35 Type 3 - 1000 5.5 kW (7.5 HP), 3 speeds Motorized height and tilt adjustment Large safety guard Double roller carriage, 3,200 mm Scoring unit with LED lighting CNC rip fence, cutting width 1,000 mm Angle-mitre fence 3,450 mm, without length compensation Table extension/table width extension: With premium CDF surface The solution for precise and versatile tasks. This saw impresses with its single-sided tilting saw blade, ideal for precise cutting of wood-based panels, solid wood, and even wood-like profile materials. Its solid machine base, made of robust 10 and 5 mm steel sheets, ensures stability and durability. With the proven double roller carriage featuring the Altendorf system, and motorized adjustments for the saw unit's height and tilt, we set new standards in precision and handling. A particular highlight is the intuitively operated eye-level control panel (tiltable and swiveling), equipped with a touchscreen, making operation and monitoring a real pleasure. Technical features 15" touchscreen (19:6) Double roller carriage, 3,200 mm Electromotoric tilt and height adjustment 0 - 46° of the main saw blade, max. 154 mm Main drive with 3 speeds (3,000/4,000/5,000 rpm) Main saw blade diameter 300 - 450 mm Large safety guard Hedpfxsxrc R To Aqqep Perfectly tailored for maximum flexibility and user comfort. The F 35 Type 3 is a flexible and convenient panel saw, ideally suited for modern businesses. With a motorized rip fence and optional DIGIT L or LD as well as interpolating axis movements, it offers high comfort and precision. A large modern display for controlling functions supports easy handling of this machine. The scoring unit, including LED lighting for the danger area and the optional RAPIDO system, ensures clean cutting results.

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, Hodpjxuqulefx Aqqsp including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Year of construction: 2024, condition: new, max. cutting height – ø 340 mm min./max. cutting width 80 – 250 mm min./max. side fence 18 – 80 mm max. cutting length 6,000 mm Feed rate 5 – 30 m/min Saw motors 2 x 55 kW Feed motor 4.0 kW Width adjustment motor 0.55 kW Infeed roller motor 0.75 kW Weight 8,000 Optional equipment Self-adjusting laser Infeed table extension up to 8,000 mm Automatic width adjustment with 6 fixed dimensions Equipped with 1,000-mm-ø blades Motorized log rotating device Hjdpfx Aqou Izkjqjp Electronic braking system

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: AB141760, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit manual adjustment electric height adjustment electric swivel with siko display Hedpfx Aqotwp Epsqjp Suction connection 1x100mm 1x120mm

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Hsdpfjwrb U Tjx Aqqep

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Hydro pneumatic return stroke of saw carriage Hedpfsg Uzl Eex Aqqop Pneumatic saw blade clamping Precision linear guide for saw carriage Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Optical signaling device for process status recognition (3-color signal lamp)

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €10,500 - Scorer - Saw blade tilt and height adjustment are manual - Cutting height 200mm - Scoring device with separate drive motor - Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guide - Extendable aluminum longitudinal fence with two folding stops - 7.5 kW powerful main motor mounted on a robust cast iron frame - Four-times-cushioned sliding table made of anodized aluminum with high torsional rigidity - Multiple locking on sliding table - Standard with table extension and table extension made of thick plate - Large swing guard hood easily swivels up using a gas spring - Saw blade clamping via tool-free rapid system + Extraction connection Extraction port diameter: 120mm Extraction port diameter for saw guard: 80mm Hjdpowf Ndcefx Aqqop + Electrical data Connection voltage: 400V Mains frequency: 50Hz Nominal power consumption: 8.3kW Output power: 7.5kW + Sliding table and table Sliding table length: 3200mm Sliding table height: 890mm Table height: 890mm + Circular saw unit Cutting width with parallel fence: 1450mm Max. cross-cutting width left of saw blade: 3200mm Saw blade tilt: 90 – 45° Max. cutting height 90°: 200mm Max. cutting height 45°: 140mm Saw blade diameter: 550mm

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Hjdpfsyarq Tjx Aqqop

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Hjdpfot Amc Ijx Aqqjp

Condition: good (used), Year of construction: 2001, machine/vehicle number: 60.11.012.01, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 155 mm, saw blade diameter: 450 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,610 mm, pivoting range: 45 °, table length: 3,200 mm, table width: 1,610 mm, Equipment: motor brake, scorer, Format-4 Kappa 450 – Panel Saw – Well-Maintained Condition For sale is a Format-4 Kappa 450 panel saw from the manufacturer Format-4 (Felder Group), year of manufacture 2001, in fully functional and well-maintained condition. Features and Equipment: - Integrated scoring unit - Extra-wide rip fence – up to 1,610 mm cutting width Hjdpfsxvdqiex Aqqep The machine has been regularly serviced and is in good technical and visual condition. Key Technical Data: Model: Format-4 Kappa 450 Year: 2001 Saw blade diameter: max. 450 mm Cutting width at rip fence: 1,610 mm With scoring unit and tilting function Condition: Used, well-maintained, fully operational.

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Extraction port: 2 x 100 mm Width: 1,700 mm Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Hjdoud Sk Sepfx Aqqjp Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: V 435496, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, cutting length (max.): 3,700 mm, length stop: 3,200 mm, Equipment: scorer, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 3,700 mm Max. cutting width: 1,100 mm Cutting width at rip fence: 1,100 mm Max. cutting height: 170 mm Max. cutting height with scorer: 170 mm Saw blade diameter: 450 mm Length stop: 3,200 mm Sliding table length: 3,700 mm Sliding table width: 450 mm MACHINE DETAILS Total weight: 1,800 kg Connected load: 7.5 kW (10.20 HP) Extraction port diameter: 120 mm EQUIPMENT Motor brake Scorer unit Digital cross table Digital length stop 3-axis electric scorer unit 400 mm adjustable hood arm Hedpfxox Dkp Ij Aqqep 3.70 m edging length Laser cut line indicator Template holder Pneumatic folding circular saw fence Second support

Condition: good (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, table length: 1,400 mm, Types:F 45 ,Machine nr:90-8-86 Hodpfxstxh Nie Aqqsp

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Hodpfxowp Ipxs Aqqjp

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Hjdpfx Aqexvbvvjqsp - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm Hsdpeulg Szjfx Aqqop With a cutter

Condition: excellent (used), Engine 5.5 kW Cutting height 9 cm Table length 330 cm Clearance 100 cm Scoring unit Cutting angle and height hydraulic Hodpfowtl Ndsx Aqqep