Used Circular for sale (1,546)

Condition: good (used), Year of construction: 1987, Max. cutting length: 5.2 m Max. cutting width: 0.6 m Max. cutting height: 140 mm Ledpfxoz Dnpps Ahaoah Ready for immediate use. The blades will be replaced with new ones.

Condition: used, Year of construction: 1983, Used Machine Year of Manufacture: 1983 Condition: Saw unit has been refitted with new bearings Features and technical specifications: With a 45° tiltable saw blade Sliding carriage and swivel arm Machine table 700 x 680 mm Height to top edge of table: approx. 900 mm Circular saw blade height adjustment: approx. 55 mm Max. circular saw blade diameter: 315 mm Circular saw blade bore: 30 mm Lajdpfx Ahjznk Daoash Maximum cutting height with a 315 mm saw blade: approx. 85 mm Cutting width: approx. 400 mm Maximum cutting length in front of the saw blade when using the sliding carriage: approx. 925 mm Dimensions of the sliding table: 780 x 340 mm Motor: 3 kW – 2,870 rpm Saw shaft speed: approx. 4,600 rpm Weight: approx. 216 kg

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cutting length: 2700 mm - Cutting width: 1050 mm - Cutting height: approx. 145 mm - Motor: 5.5 kW - 2,800 - 4,000 - 5,500 rpm - Hydraulic lifting, lowering, and swiveling of the saw unit up to a maximum of 45.5° - With scoring unit Ledpozyy Dasfx Ahaoah - With parallel cutting device Weight: approx. 1,270 kg

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Ledozinzrspfx Ahaeah Weight: 150 kg In good condition

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Sharpens the front and rear edges in a single pass. Ljdpfx Ahezl Snuoajah Technically inspected. Technical specifications in the PDF.

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Ljdoz Il Evopfx Ahasah Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed - cutting height: 140mm Lasdpfxoztzc Ds Ahajh - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1811001, type of input current: three-phase, overall weight: 110 kg, input voltage: 400 V, Equipment: emergency stop, Abrasive cut-off saw manufactured by Vertex Machinery Works Co., Ltd. The unit was produced in 2018 in Taiwan. The machine is mounted on a dedicated, blue workshop base. Technical data: Manufacturer: Vertex Machinery Works Co., Ltd. Country of manufacture: Taiwan Year of manufacture: 2018 Serial number (S/N): 1811001 Motor power supply: 400 V / 50 Hz Lsdpfxez Sutxe Ahajah Number of phases: 3 PH (Three-phase) Machine weight: 110 kg Compliance mark: CE Design and equipment: The machine has a manual clamping lever and a vise for securing the workpiece. The cutting part is equipped with an abrasive disc (a close-up photo shows a Tyrolit disc). The steel base is equipped with a lower shelf made of perforated sheet metal.

Year of construction: 2013, condition: used, This machine is used for sharpening circular blades for Eillert slicing machines. Ledpfx Aoz H At Ushaoah The machine is in good working order and ready for use. Please check my other listings.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm Lajdpoz Ny Ddofx Ahaoh - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: good (used), Year of construction: 1994, For sale is a robust oscillating circular saw from the German manufacturer Bäuerle, model PKS, manufactured in 1994. The saw comes from a public institution and has always been maintained and serviced. Thanks to its mobile base, the machine can be used flexibly within the workshop. Ideal for the precise cutting to length of solid wood, timbers, planks, and sheet materials. Technical data and features: +Manufacturer: Bäuerle +Model: PKS +Year of manufacture: 1994 +Motor power: 3 kW +Connection: 400 V +Mobile base +Saw blade diameter: max. 450 mm +Saw blade bore: 30 mm +Speed: approx. 2,800 rpm Laodszz Nqlopfx Ahaoh +Cutting height: approx. 125 mm +Cutting width: approx. 600 mm +Mitre range: 0–45° +Dust extraction connection: Ø 100 mm Solid and durable design for professional use in carpentry shops, joineries, and wood processing companies. If you are interested or have any questions, please do not hesitate to contact us! Price: Negotiable €3900 net.

Condition: repair required (used), HAMECH TKS 400 CIRCULAR SAW – FOR PARTS For sale: a Polish-made HAMECH TKS 400 circular saw. The machine is sold FOR PARTS / FOR REPAIR – it is incomplete. MISSING THE SAW LIFTING / ADJUSTMENT MECHANISM. Sold in the condition shown in the photos. DATA FROM THE NAMEPLATE: • Manufacturer: HAMECH • Forest Machinery Industry Plant • Type: TKS 400 • Year of manufacture: 1990 • Serial number: 536 • Voltage: 380 V • Motor power: 5.5 kW • Frequency: 50 Hz The saw has a solid, heavy-duty construction and a large work table. The machine can be used as a basis for repair or as a source of spare parts. PLEASE NOTE: Ljdpfx Ahez Hrgqsajah • Missing saw lifting mechanism • Machine is incomplete • Not sold as ready for operation • Technical condition has not been thoroughly checked • Visible signs of years of use • Paint loss and surface corrosion • Sold in the condition shown in the photos For the TKS 400 model, configurations with a main blade up to 400 mm, a 5.5 kW motor, and adjustment of the blade position up/down and at an angle are common. The parameters of individual TKS 400 versions may vary. The machine is sold as INCOMPLETE – FOR PARTS / FOR REPAIR. Possible to inspect before purchase. Collection in person.

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw TS 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, adjustable from 0° to 45°, motor 4 kW (5.4 hp), sliding table 2,000 mm, lifting and traversing mechanism, Lsdpfoy N Sfqsx Ahaeah foldable table extension, miter gauge, SUVA saw blade guard, GS-certified for wood dust with CE marking, ex works, as inspected at the Seevetal location, excluding transport, subject to prior sale.

Condition: used, Year of construction: 2020, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm Lajdpfsygx Aisx Ahash turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device

Condition: used, Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Laodpfjzryvmsx Ahaoh

Condition: used, Rema circular saw with carriage Main motor: 5.5 kW 3 cutting speeds Scoring saw: 0.75 kW Saw blade adjustable up/down and at an angle of 0-45 degrees Max. blade diameter: 400 mm Used machine, still in good working condition. Laedpfsz A Al Njx Ahaeh

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher Lasdpfxexvbvvs Ahajh

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : Ledpjz Hpazofx Ahaoah 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Model FSK Dimension of sliding table- 3000x330mm Gross cut capacity- 2700mm Width of cut between saw blade and rip fence - 1650mm Saw blade diameter - 400mm Scoring saw blade diameter - 120mm Height of cut - 125mm Speed levels 3 Tilting saw blade - 0-45º Saws lifting, up and down, mechanical control. Main motor - 5,5 kW Scoring motor - 1,1 kW With clamp Ledpfoz Dt U Rsx Ahasah Weight: 780 kg Transport dimensions - 3100x1300x1200mm Price 1500 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m Lsdpfjy N D Nhjx Ahaoah

Condition: ready for operation (used), Eisele VMS 300 Saw, Cold Circular Saw, Circular Saw Cutting range: max. 120 x 75 (straight cut), max. 80 x 75 (45° miter cut) Weight: 185 kg Max. saw blade: Ø 300mm Saw blade speed: 20 / 40 RPM Lajdpfx Ahszypw Nsash Year of manufacture: 2002 Length stop Measuring device Roller conveyor You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm cutting width 1250 mm Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. Laodpfx Ahsz E Sv Noaoh weight of the machine ca. 650 kg

Condition: used, Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: - Cutting height: ~ 145 mm - Cutting width: ~ 1,300 mm - Cutting length: 3,300 mm Lajdpjzrywwsfx Ahash - Tilt angle: 45° - Stop: Digital - Adjustment: Electronic - Rip fence: Manual

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. Ledpfozvn S Rex Ahajah DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available - Laedpfx Asyy St Ashaoh