Used Circular for sale (1,591)

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 Fjdpfx Agsfym Ewedjft with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Year of construction: 2017, condition: ready for operation (used), General Data Fsdpfxex D Sazs Agdeft Measurements width 1420 Measurements depth 5250 Measurements height 1900 Machine weight 1260 Additional Equipment Pneumatic saw feed Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2600x3010x1250 mm Weight 500 kg Total power requirement 3,8 kw Ffsdpovz Hlwefx Agdjt

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Fodpextvcxsfx Agdjft Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: refurbished (used), TECHNICAL DESCRIPTION KKS 450 KKS 450 Semi-automatic, hydraulic universal circular saw with rotary table for mitre cuts SAW BLADE Segmented saw blade Blade mount according to DIN 8576 ☐ 400 x 4 ☒ 450 x 4 mm 50/4 x 14/80 mm WORKING RANGE Round material 90°/45°: 125 / 150 mm Square material 90°: 115 / 140 mm 45°: 110 / 130 mm Flat material 90°: 305 x 40 / 330 x 40 mm 45°: 235 x 30 / 250 x 40 mm U-profiles upright 90°/45°: 120 x 55 / 140 x 60 mm U-profiles horizontal 90°: 240 x 85 / 280 x 95 mm 45°: 180 x 70 / 220 x 80 mm Cut lengths from 10 mm DRIVE POWER Saw motor: 1.8 / 2.7 kW Hydraulics: 1.5 kW Coolant pump: 0.1 kW CUTTING SPEEDS (Standard) 11.5 / 23, 13 / 26 m/min or 10 / 20, 11 / 22 m/min or 13 / 26, 15 / 30 m/min SAW BLADE FEED Continuously adjustable as per table: 0 - 1,000 mm/min Blade rapid return: 3,300 mm/min ELECTRICAL CONNECTION TN-S system – 3 phases, neutral, earth Ffjdpfxox N Ncao Agdot 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 520 mm, total length: 1,750 mm, total width: 1,030 mm, total height: 1,800 mm, type of input current: three-phase, input voltage: 400 V, saw blade bore: 50 mm, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a client is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in very good, well-maintained, and fully functional condition and has been regularly used until recently. Current UVV/safety inspection available (see photos). Viewing and function testing on site can be arranged at any time. ⸻ ❇️ Technical Specifications: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade diameter: 520 mm • Bore: 50 mm • Swivel range: large, finely scaled mitre range • Drive: 400 V • Application area: Primarily for processing aluminium and profiles • Design: Heavy-duty industrial standard construction Fsdpfx Ajx N Hxxegdoft ⸻ ❇️ Features & Highlights • Very robust machine stand • Large dual-sided worktable (multiplex coated) • Pneumatic hold-down clamps • Extraction hood / extraction port • Digital measuring/length stop system (display mounted on top) • Precise swivelling mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Ready for immediate operation • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Very good, well-maintained, immediately ready for use • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with VAT shown is possible • Delivery or transport available upon request and cost coverage • Location: 72229 Rohrdorf • On-site loading by overhead crane possible ⸻ ❇️ Price: Net asking price: €8,990 + VAT ⸻ ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ Other accessories for the workshop and metalworking are also available in my other listings. ‼️ Please also take a look at my other items. It’s worth it!

Year of construction: 1980, condition: used, Circular saw with miter cut Fedpfxjixumve Agdjft Make KALTENBACH Type:KKS 400 M Year.ca.1980 Hydr.feed infinitely variable. Saw blade: 400mm

Year of construction: 2007, operating hours: 18,879 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model n/a This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Application Types Fsdpfx Agox D Etbedsft Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Fjdpovz Hktefx Agdjft Weight 1000 kg Total power requirement 6,5 kw

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops Fodpsx Dax Esfx Agdjft - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Year of construction: 2021, condition: new, −−−− Panel Data −−−− − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour Ffjdpfx Agoi Dylfsdjt MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: used, Engine power: 13.59 PS/HP (10.0 kW), year of manufacture: 2012, boom table: with degree grid index, format sliding table: 3200 mm, parallel stop: 1000 mm, tool compartment, spray device, stepless speed Fodpfxsvwl Ezj Agdoft

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm Ffedpfxjtwn E Ue Agdjt

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. Fodpfox D D Auox Agdeft Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 850 kg Ffedpfx Agovz Hkmjdjt Total power requirement 5,5 kw

Year of construction: 2019, condition: ready for operation (used), General Data Machine weight 1150 kg Ffjdpfex D Iqpex Agdot This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Application Types Sawing

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 870 kg Fedpfxovz Hive Agdeft Total power requirement 5,5 kw

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Fjdpfjx D E T Ujx Agdoft Application Types Sawing (Wood)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x3010x1250 mm Weight 400 kg Fedpfx Asvz Hgzegdjft Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x2800x1100 mm Weight 310 kg Fedpfsvz Hcpjx Agdsft Total power requirement 3,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1860x2700x1450 mm Weight 350 kg Total power requirement 5 kw Ffjdpfevz Hahox Agdst

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1450x2700x1450 mm Weight 350 kg Total power requirement 3,5 kw Fedpovz E Udsfx Agdoft

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2600x2800x1100 mm Weight 330 kg Fsdpfx Agjvz E I Rodsft Total power requirement 3,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6800x3350x1500 mm Fedjvz E Hgjpfx Agdjft Weight 700 kg Total power requirement 5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Total power requirement 7 kw Ffsdpfxevz Emtj Agdst