Used Clamping Device for sale (19,211)

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Clamping plate: Granite measuring plate Hard stone measuring plate -Clamping surface: 760 x 565 mm -Plate thickness: 75 mm -Load capacity: 230 kg -Dimensions: 760 x 565 x 90 mm Bwjdpet Iywcofx Aaqjw -Weight: 100kg

Year of construction: 2024, condition: used, machine/vehicle number: WB-AST-10027, with rotator and mounting bracket LIEBHERR Likufix SW 33, year of manufacture: 2023, as per invoice: sides individually mechanically foldable for plugs in switch points, Adjustable track gauges: 1,000, 1,435, 1,600 mm Bodpfxsxuvfio Aaqeww

Condition: used, Year of construction: 2017, Knoll Filtration System / Vacuum Filter Type: VRF 250 Areas of Application: - Cleaning of coolants and lubricants (KSS), emulsions, and cutting oils without the use of disposable filter materials. - Installation on machine tools for single machines, machine groups, and central systems. Function: A vacuum pump, directly connected to the inner chamber of a filter drum, draws the medium into the drum's interior. Contaminant particles are retained on the filter drum’s surface by a fine mesh. The vacuum level increases due to the resistance of the accumulating filter cake. Upon reaching an adjustable vacuum threshold, drum cleaning is performed automatically. An installed scraper chain transports the sludge out. Bsdpfx Aasxup I Dsqjww Type: VRF 250 Design: AA Filtration capacity (emulsion/oil): 250 / 150 Inlet (DN): 50 Tank volume (l): 1350 / 1450 Shipping available by arrangement for a fee or collection possible.

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg Bwsdpfxsib D H Ro Aaqsw In good condition

Condition: as good as new (ex-display), Year of construction: 2024, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg New price approx. 6.000 Euro Special price on request Bwedpfx Aoxtvgdsaqsw Description: - Special exhibition set for 28-inch clamping tables - Original SIEGMUND accessories - Scope of delivery: see pictures (approx. 50 items) - Includes mobile tool trolley

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, Equipment: type plate available, ConturoMatic CV120 Contour Measuring Device – "Simply Measure Contours" - Sample parts for free measurement can be sent in upon request; online DEMO available by arrangement. Ask us about our leasing options – we are happy to connect you with our partner. ✅ Up to 30% declining-balance depreciation on movable assets* ✅ Valid for investments from July 2025* ✅ T&S products are fully eligible for funding* Contour measurement system with feed unit and motorized Z-column Scope of delivery: - CV120 powered feed unit with precision guide - External control and regulation unit Bsdpfeq Nzd Nox Aaqeww - Motorized Z-column - Evaluation PC desktop version W11/64 Bit - 24" TFT monitor - ConturoMatic analysis software; user manual - Cabling set - FREE CM software updates!!! - Replacement probe tip 33mm CS42 included at no charge Technical Data CV120: Feed unit (X/Z measuring axis) - Z measuring range: 30mm - X measuring range: 120mm - Measuring speed: 0.1-1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe arm lift-off function Z-column - Positioning range: 320mm, motorized Accuracy: X-axis: +/- (1.2µm+2Lx/25)µm* [L=mm] Z-axis: +/- (1.8µm+2Lz/25)µm* [L=mm] Note: For tailoring the CV120 to your specific measurement tasks and for system expansion, a range of optional accessories is available, such as various probe arms, universal clamping devices, or custom part holders. * According to T&S/CV120 specification - Technical modifications reserved - Commodity code: 90318020 -2 year warranty- Photos show special accessories not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide legal or tax advice in this context, and the above notes do not constitute advice. Please consult your relevant specialists (department or tax advisor) if you have any questions.

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Lenzkes, clamping jaws, machine table clamps -Type: 100-20L -Groove width: 27 mm Bwodpfsxup I Rjx Aaqew -Number: 2x tensioners available -Price: per piece -Dimensions: 270/80/H150 mm -Weight: 4.4 kg/piece

Condition: used, Year of construction: 2007, Serial number: H1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21639 Specifications:• Not certified• Winch• Previously mounted on a boat• 1,680 kg• Needs service before use Bodpfexq Dt Hox Aaqeww Description:The crane has been standing for several years. It was functional when purchased.Service and maintenance should be expected before use.Was intended to be used as a quay crane. Own weight: 1680 Model: Heila HMR12-1S kran med vinsj (stått på båt)

Condition: used, Year of construction: 2020, This filter and cooling unit was previously used for two Starrag Heckert machining centers (lot 2770011 and 12) Order number: 2153651 Control voltage: 24 V DC Connection voltage: 3×400 V + PE / 50 Hz Connected load: 6.30 kW Fuse: 50 A Country of manufacture: Germany Additional unit: Manufacturer: BKW GmbH, Wolfschlugen Model: WRK3C-2KK2P Year of manufacture: 2005 Bsdpjxuf R Ijfx Aaqoww Refrigerant: R134a Permissible operating pressure: 24 bar Voltage: 400 V / 50 Hz Power: 5.02 kW Control voltage: 24 V DC Country of manufacture: Germany

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Bwsdpfx Asxcil Sjaqow Fine lifting speed: 1.8 m/min 1 load chain

Year of construction: 2025, condition: new, functionality: fully functional, lye device Lye Aqualung with salt container and caustic drain valve, 4-spring technology Stainless steel stand incl. Travel with storage and locking rollers Bwodpfx Aasdlp Rxoqow suitable for sheet metal size 580 x 780 mm, 4 or 5 rows Dimensions in mm: 700 x 902 x 880 WxDxH

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table Bsdjxunupopfx Aaqeww -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Condition: used, Year of construction: 2019, • Type: Assembly System for Rubber Bearings • Model: AMG HAT X290 Hybrid + E-Class (Station 314) • Year of Manufacture: 2019 • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V • Power Rating: 22 kVA • Control System: Siemens SIMATIC HMI with touchscreen interface • Integrated Lubrication System: microjet GmbH Minimal Quantity Lubrication System • Included Equipment: – Complete control and drive system – Various hydraulic and mechanical joining units – Tooling and fixture sets for different bearing types Bwsdpexufqbofx Aaqew – Pneumatic control unit with multiple valve blocks – Worktable and component storage rack

Condition: used, Electric chain hoist crane DEMAG Type PK2N-F Lifting capacity: 500 kg Hook travel: 3.5 meters Distance from suspension to load hook: 500 mm Lifting speed: 5 m/min Fine lifting speed: 1.25 m/min Pendant control cable length: approx. 1 meter Bodpfxexcbm Io Aaqoww Motor power: 0.5 / 0.13 kW Power supply: 380 Volt, 50 Hz 2 load chains = 500 kg Net weight: 32.5 kg Good condition

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm Bedpfoxuntxsx Aaqeww -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm Bjdpoxugykefx Aaqsww -Weight: 106 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm Bwsdpfxsxugx Hj Aaqsw -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Bedpoxugw Aofx Aaqjww -Table surface: 500x390 mm, height 630 mm -Wall thickness: 60 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 163 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm Bedjxugvlopfx Aaqsww -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg

Condition: good (used), Mounting bracket adapter, cross table, for mounting three-jaw chucks, three-jaw lathe chucks -Manufacturer: Scheelen, clamping bracket for lathe -Photo: Short cone 6 -Groove: 70 x 13 mm -Dimensions: see photos -Dimensions: 300/185/H180 mm Bsdpfx Aajxugl Heqjww -Weight: 26.3 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm Bwsdpfxjxryzij Aaqew -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm Bodpfx Aoxrywqeaqeww -Width: 1000 mm -Height: 285 mm -Plate thickness: 35 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with adjustable feet -Length: 2000 mm -Width: 1000 mm -Height: 285 mm Bwjdpfxsxryv Ho Aaqjw -Sheet thickness: 30 mm -Adjustable feet: 4 pieces 240/240/H590 mm -Transport dimensions: 2000/1000/H525 mm -Weight: 960 kg

Condition: good (used), Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories Bsdpfx Aaoxrnb Deqoww -Clamping tool: clamping bracket, various designs -Groove: 27 x 85 mm -Price/Delivery: complete -Transport dimensions: 480/460/H45 mm -Total weight: 39.7 kg

Condition: good (used), Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos Bodpfx Ajxrkqusaqjww -Dimensions: 560/470/H405 mm -Weight: 62 kg