Used Clamping Rails For Elektromotor for sale (12,383)

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps Ledpsxy H E Dofx Agzoak -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Condition: like new (used), 1 x Hydraulic 3-jaw chuck, Samchully, diameter 300 mm Type: HC 12 15C066, EUR 800 net; and 1 x Hydraulic clamping cylinder Lodpfx Aox Ifhvegzjak Type: Y-1550 RE Max. 5500 rpm, EUR 800 net . Sale individually or as a set!

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm Ljdpexy Styofx Agzeak T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, machine/vehicle number: 008203, Max width workable: 1000 mm Max length workable: 2950 mm Lodpjx A Tgaefx Agzoak Max height workable: 1300 mm Max feed speed: 40 m/min

Year of construction: 2018, condition: like new (used), Zero Point Clamping System Manufacturer: Vischer & Bolli VB tools Year of manufacture: 2018 Condition: unused Ljdsgquv Uopfx Agzsak System consists of: 1 piece of Dock Lock locking plate, steel Size: 600x200x85/95 mm with 2 DockLock SAFE20 built-in cylinders up to 12.5 kN per cylinder 10 mounting holes for M16 Allen screws 1 custom base plate, steel Size: 800x250x76 mm 1 DEUX-MILL clamp 1 custom base plate, aluminum Size: 600x600x40 mm 5 SAFE20 long clamping studs with centering 10 SAFE20 long clamping studs without centering 5 SAFE20 long compensating clamping studs 1 hydraulic pump

Condition: good (used), Year of construction: 2009, Manufacturer BIESSE Model UNICLAMP Machine type: Mechanical clamping system Lasdpfx Aowmr Tvjgzok Year of manufacture: 2009 Item number: 7350171 Technical specifications Quantity: 5 Clamping height: 15 - 55 Height: 48 mm, with quick-release coupling Suitable for Biesse Additional information * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Biesse console tables with ATS Location: From stock, 54634 Bitburg - Available immediately -

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 945 mm -Length: 2990 mm -Height: 58 mm -Working height: 870 mm Lasdpfob S Taqox Agzsk -Plate: with support ribs -Groove width: 24 mm -Center distance between the T-slots: 180 mm -Dimensions: 3605/950/H870 mm -Weight: 2290 kg

Condition: used, Manufacturer unknown! Clamping plate, approximately 800 mm diameter with KK8 mounting. Manufacturer unknown! EUR 250,-- net per piece. Laedpfxjx Ic Awo Agzjk

Condition: used, 4 clamping elements, down-hold clamps, heavy-duty clamping jaws, clamping plate LENZKES type 170796 Lajdpsxy Stgefx Agzjk Plate clamps, flat clamps, deep-jaw clamps, deep clamping jaws, low-profile clamps, clamping jaws Length: 280 mm Width: 200 mm Height: 113 mm Clamping plate width: 89 mm Mounting slot distance: 62.5 / 125 mm Mounting slot width: 27 mm Mounting slot length: 145 / 185 mm Construction height of mounting slot clamping surface: 58.5 mm - Down-hold action via hex socket screw SW17 - Clamping movement via trapezoidal thread spindle - Reversible jaws for use on either side along the trapezoidal spindle - Reversible clamping jaws with dovetail guide for changing sides - 3 elongated mounting holes for fastening to the machine table Weight per clamp: 15.5 kg Total weight: 62 kg Very robust design Very good condition

Condition: used, machine/vehicle number: 008225, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1400 mm Max feed speed: 12 m/min Lsdpfx Agsx A E Snezjak

Condition: new, Year of construction: 2022, functionality: fully functional, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Basic Chuck FK 38 new - unused suitable for Reishauer gear grinding machines, fits spindle for machines RZ 150 / RZ160 / RZ 260 clamping diameter: 38 mm for n max. = 3,000 rpm balanced with clamping stroke monitoring / 3-point position control and provision for additional functions: clamping / air supply monitoring / clamping stroke monitoring incl. mounting and operating instructions as well as Reishauer wooden transport container Price / details on request All technical details subject to errors and omissions. Laodpfxjwzkcxo Agzjk We sell exclusively to countries of the European Community.

Condition: excellent (used), Year of construction: 2004, Clamping Plate TECNOMAGNETE - SQ410HD75 MACH-ID 9293 Brand: TECNOMAGNETE Model: SQ410HD75 Year of manufacture: 2004 Permanent-electro magnetic plates 4 matching plates Total of 12 units available Mono-block pole plate and FEME 4 Pin connector CE Declaration of Conformity Table length: 1020 mm Table width: 410 mm Table height: 68 mm Number of poles: 40 Pole size: 75 x 75 mm Clamping force: 306 kN Length: 1020 mm Width: 410 mm Laedpfxsxxkhys Agzek Height: 68 mm Weight: 210 kg

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) Ljdpfx Agow Dzk Eezeak -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: good (used), We offer you: Laedow Ra Hwspfx Agzsk

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Laodpjxcimiofx Agzsk

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Zero Clamp Zero Point Clamping System Base Plate with 3 Clamping Plates For sale is a Zero Clamp zero point clamping system. The system was used only a few times after purchase and is therefore in very good condition. Scope of delivery: - 1x Base Unit TK200/4 (Original price: €4,423.00) - 1x Connection Block Komfort 5-A (Original price: €364.50) - 1x Zero Clamp Quick Coupler, Brand Garant 360019 10241 (Original price: €41.30) - 1x Cover Plate TK200/4 (Original price: €116.50) - 3x Plate TK200/4, each with 4 clamping studs M16 (Original price: €2,022.00) Lajdpexqqh Djfx Agzjk - Plus screws as shown in the pictures. Total original price: €6,967.30 net. Ideal for precise and rapid clamping in mechanical engineering / toolmaking. Price: €3,999.00 negotiable, net. No warranty or returns.

Condition: used, Year of construction: 1989, functionality: fully functional, The digital stand control-unit visible in the pictures and video is not included (it is visible because it is interchangeable between machines). The machine operates with its own controller. Laodpjxz Awrjfx Agzek

Condition: like new (used), 1 x hydraulic 3-jaw chuck, Samchully, diameter 300 mm Laodpfxex Eht Ho Agzek Type: HC 12 15C066 and 1 x hydraulic clamping cylinder Type: Y-1550 RE Max.: 5500 rpm Sale possible individually or together!

Condition: good (used), Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler -Tensioning pliers: sealing device for strapping -for staples: approx. 16 mm width -Dimensions: 450/100/H110 Lasdpji E Af Rjfx Agzsk -Total weight: 2.9 kg

Year of construction: 2022, condition: excellent (used), ROTOX tilting table in as-new condition, including rails, transport table, and control cabinet Lodpfx Asx Dy S Sogzsak

Condition: used, total length: 545 mm, total width: 545 mm, drop-through hole in table: 90 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 Ledevcywvspfx Agzoak No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 900 mm, total width: 620 mm, drop-through hole in table: 250 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 Laedpfxjvcywis Agzek No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 800 mm, total width: 507 mm, drop-through hole in table: 155 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Lsdpfx Aevcyxyegzsak Further information and prices are available on request.

Condition: used, total length: 600 mm, total width: 520 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Ledpfovcyykox Agzoak Further information and prices are available on request.

Condition: used, total length: 1,200 mm, total width: 600 mm, drop-through hole in table: 220 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 Lodpfx Asvcyrtsgzjak No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.