Clay brick plant buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Clay brick plant Keller / Lingl

Purbach, AustriaAustria dealership location
7195 km
good (used)
with control, technical data on request, Aerated concrete plant, Lime sandstone factory, calcium silicate blocks, Roofing tile works, Cwcue9nna Clay brick more
13

Clay Brick Plant - Bongioanni BONGIOANNI

Đakovo, CroatiaCroatia dealership location
7460 km
2007
good condition (used)
Technical Details - Furnace - Gas nad Coke - Power - cca 600 Kw - Capacity - 41.000 unit / 8h - Press - Bongioanni - Italy Bbiue9opjy - Stacking Line - Cosmec - Italy - PLC Managament - Siemens - Mills - Handle , Dalit - Number of shift workers - 8 Person Clay brick plant was in operation just one year ! Very good condition !! more
6

Clay Brick plant Handle PZ656D/50

Đakovo, CroatiaCroatia dealership location
7460 km
2002
used
Capacity-140.000 Pieces/ day molds - 12,20,25,29,30,38 cm Electrical power- 500 KW automatic line Consists of . 1.Mills Fzx8hhx 2.Press -Handle - Germany 3.Drier 4.Packer two pieces 5.Furnace More pictures at the customer's request Status Line -Service fully assembled more
6
E drive + task band with frequency converter and load-dependent control + mutton mill (electric motor 22 kW) with Strainer basket (currently holes 22 mm / more available) + 2 deck screen machine (currently 04 + 4/10 + 10/22) + 3 discharge conveyors m. magnetic separator + AVS - diesel power generators () IVECO / 2,832 hours) + hook lift frame 2qylgy more
15
E drive + task band with frequency converter and load-dependent control + mutton mill (electric motor 22 kW) with Strainer basket (currently holes 22 mm / more available) + 2 deck screen machine (currently 04 + 4/10 + 10/22) + 3 discharge conveyors with magnetic separator + AVS - diesel power generators (IVECO / 2,832 hours) + hook lift frame Bahvqhpgo8 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbvq0mswko COLUMBUS MCKINNON COMPLETE TIRE SHREDDING OPERATIONThis system will take whole passenger and truck tires and process them down to a 2" TDF chip; -- Whole tire in-feed conveyor 36" wide x 30' long -- CM Primary 2-speed Shredder with 250 HP motor with (22) knives installed -- Short shredder out-feed conveyor 24" wide x 10' long -- Long shredder out-feed conveyor 24" wide x 30' long -- CM Chipper Shredder with 200 HP motor with (18) knives inst... more
5
work piece width:1000 mm workpiece height:420 mm bore diameter:8 - 40 mm weight of the machine ca.:18 t Bafx83voao dimensions of the machine ca.:B x L x H 6,2 x 6,5 x 2,9 m The sawdrill line consists of a drilling system from Peddinghaus - BDL 1000/9 - and a band saw from Meba - 1020 DGP. It is used but in good condition. The band saw is from the year 2005, the drill line from 2007. Technical data Peddinghaus drilling rig BDL 1000/9 The maximum working width is 1000 mm, the maximum working h... more
5
Diesel tanks, diesel tank, gas station, fuel tanks, capacity -for diesel, heating oil, gasoline -with electric motor pump Content 800 litres Dimensions 1050/1050/H2070 mm Fq8p9ruug -Leergewicht 238 kg more
13
Bouwman pharmaceutical plant Nfdfl Isolator with freeze-drying plant Insulators are the safest way to ensure sterile conditions. In insulators, an evaporator in connection with a distribution system takes over the automated decontamination. Built in 1991 Weighing system - capacity: 20-6000 g ABM. Inside: ± B160 x D150 x H110 cm more
PERFECTA SDY 1 Machine No. 49143 Bj. 1986 STAHL ST 200 1 cover feeder 5 Stations 4 flat heads 4 omega heads Nfa9b WOHLENBERG GOLF 370 Perfect binder 1992 20 Stations + hand feed 15 clamps hot & cold melt side glue hot & cold melt back glue Perfecta 115 TVC 1994 Airtable TFT Touchscreen Monitor 2 side air tables light barrier programmable Brehmer Sewing Machine 381/3E 1992 with Headop Feeder MBO T45/4X F 1991 4 buckles 1 knife A45 delivery more


clay brick...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbvq0dbqwn COLUMBUS MCKINNON TIRE SHREDDER SYSTEM -- 200 HP Electric Motor powered by a 350kw Genset -- Comes with infeed conveyor along with discharge comveyor -- Replaced all the knives last year (2017) -- Will process 250-300 tires per hour and produce a 1" shredded chip -- Loaded on your truck more
5
work piece width:620 mm Ncv9b workpiece height:450 mm drill diameter:10 - 40 mm The Kaltenbach KBS 620 APS603 saw drill line from 1999 is overhauled at Nenok and is in good condition before delivery. The combination consists of the Kaltenbach band saw KBS 620 DG and an APS 603 drill line. The band saw is semi-automatic and equipped with diagonal cutting +/- and suitable for sawing steel profiles. The saw blade dimensions are 6175 x 41 x 1.3 mm. The cutting speed is infinitely variable in a ran... more
5
Wastewater treatment plant, drilling water purification, chip separator, filter paper, paper band filter -Electronics is defective and therefore to sell the plant as a replacement carrier Delivery as is as seen 23c3i93do Tank-1090/690/H410 mm -Rührwerk of kw speed R/min -with non-woven belt filter belt -Flockers Dimensions 1500/800/H1800 mm Weight 188 kg more
6
we sell for our customer: sagging plant for various bulk materials This machine is new, unused consits of: gravitations net weight scale MÜNCH EDELSTAHL Typ Tg 8010 for bags til 25 kg - SIEMENS Logo 24RC control - roller conveyor Ybni3gcx - weighting system METTLER TOLEDO Typ: XK3123 Panther - welding system GEHO Type: TM 600 D and more... Please see PDF attached. more
6
CNC punching machine with a punching force of 1000 kN. Travel distance 1200 x 600 mm. Five different punching or shaping tools can be driven via the control. A drilling and a deburring unit is also installed, which can also be operated via the control unit. Drill holes from 10 to 40 mm and threads from M 12 to M 24 can be produced. With the deburring unit punchings up to 30 mm and holes up to 40 mm can be machined. Fpc8d9 The speed of the positioning can be adjusted variably. more
1

Sawing- and Drilling Plant WESPA Wespa

Göppingen, GermanyGermany dealership location
6699 km
used
work piece width unbk. mm workpiece height unbk. mm bore diameter mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m U2ikbilkp more
1

VENEER MFG. PLANT COE 263

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Ncdkf HOT SALE ! Green Line Veneer Plant with the following components: • 40 Ft., 2-strand Hl30 chain infeed deck with drive.• Hourglass rollcase reject transfer with drive.• 1-Ton KITO chain hoist with pin bar reject log grapple.• 40 Ft., 2-Strand H78 chain infeed section to lathe.• 1993 COE pin placer with 1981 DURAND Model M785 automatic lathe charger with (5) COE Model 203 (1993) displacement laser scanners.• Chevron Belt core transfer with k... more
5
work piece width:620 mm workpiece height: 350 - 400 mm drill diameter:10 - 40 mm number of drill axes:3 Measurement saw band:6175 x 41 x 1,3 mm cutting speed:15 - 90 m/min Bb0qxopmla The Kaltenbach band saw KBS 620 DG and drill line APS 615 is a machine combination with Signomat and transport system. The drill line is in very good condition and has been upgraded by Kaltenbach for quick drilling with carbide drills. This makes it possible to use Kennametal KSEM drills on all 3 drill axes. The... more
5

Screening plant EIMA Edelstahl

Wiefelstede, GermanyGermany dealership location
6385 km
used
Screening plant vibrating screen, vibrating conveyors, sorting system, separation, separation plant Delivery as is as seen Screening plant as a semi-finished product without drive -Komplett made of stainless steel 3xtx7kqhe Wire width 500 mm Screen distance 15 mm Triple separation could you reach Filler funnel Outlet DN270 dimensions 1950/1000/H1200 mm Weight 174 kg more
5
Cable recycling unit, complete incl. Pre-shredder PGM 400 - N. Installation only 600 operation hours! 2dasxdsh Can be seen in DE-Schweinfurt more
1
Clayfräsmaschine - ITP group Type: M-Tower 4m Construction year: 2014 0yszsgph Control: ITP group Deva MC Power 450W Steep taper mount ER20 Technical data of 240 Speed range: 0-4000 min-1 Working range x axis: 4000 mm Workspace y axis: 2000 mm Work area Z axis: 2200 mm Work table: 4000 x 2000 mm more
6

vacuum impregnation plant IWT komplett aus Edelstahl

Aalen, GermanyGermany dealership location
6717 km
2001
good (used)
vacuum impregnation plant IWT complete stainless steel! Ssk3os year of constr. 2001 very good condition less than 500 working hours! volume: 9.120 liter length 5,00 m diameter 2,00 m working temperature max. 85° 0 / 13 bar with roll conveyor for loading incl all accesory still in operation immediately available ex location nearby Mannheim dismantling and loading by us on request more
1

MDF DOOR SKIN MFG. PLANT WASHINGTON IRON WORKS 8 TPH

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Dyg0yrt MDF Manufacturing Facility designed around making thin door skins and will make board products as well. The plant is complete with few exceptions and boasts the following features and major components:This plant produces MDF fiber from wood chips delivered to the site by outside vendors. Such fiber is generated by a steam pressurized “digester” and pressurized disc refiner. The refined fiber is then dried and blended with resin. The fu... more
5
work piece width:300 mm Qf2v3yxv workpiece height:50 mm bore diameter:8 - 27 mm total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,3 x 2,5 x 1,4 m workpiece weight:max. 3 t Peddinghaus CNC controlled beam saw drill line DSC300 D with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring system, 3 drill spindles for HHS inner coolant drills Ø =8-27 mm, incl. infeed and outfeed roller conveyor. This small saw drill line is esp... more
4
Reaction vessels, batch plant, solid matter separator, utility sink, painter washing station, water treatment, tool - and water purification Delivery as is as seen Batch plant with a reaction tank 105 litre Dimensions 1400/840/H1800 mm Weight 290 kg Qkt8kewui more

Sawing- and Drilling Plant SCHUMACHER 750

Stockstadt, GermanyGermany dealership location
6564 km
1975
used
work piece width: mm 0kzwenz9 workpiece height: mm bore diameter: mm saw blade diameter:450 mm 100 % before loading warranty: none more
1
Clayfräsmaschine - ITP group Type: Mora conversion M Tower Year of construction: Remodeling 2011 Control: ITP group Deva MC Power 450W Bcptok9no9 Steep taper mount ER20 Technical data of 240 Speed range: 0-4000 min-1 Working range x axis: 5000 mm Working range Y-axis: 1900 mm Work area Z axis: 1700 mm more
6
CNC machining plant IMA BIMA 810 / D / 2H For work tops with automatic external-setup table Tppiysub First installation in 1998 throughput direction from left to right technical data: working height 950 + 50 mm work top dimensions 4500 mm x 1200 mm x 30 / 40 mm LWH control system IMATRONIC 231 processing units / processing aggregates: (full description of the numbers on request ) 076967 7786... more
1

PARTICLE BOARD PLANT SIEMPELKAMP 4-OPENING

North Carolina, United StatesUnited States dealership location
518 km
1969
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dyql8fu Particleboard mill with SIEMPELKAMP 5' x 20', 4-opening [...] annual capacity is 26 million sq feet or approximately 130 cubic meters per average 24-hour production [...] plant is comprised of the following main components: -- 1. Blender Manufacturer: PAL, Year 1986, Size 120, Motor HP 125. -- 2. Formers Manufacturer: WURTEX 1969. Homogeneous board, number of forming heads - two. -- 3. Mat forming deckles with caul sheets - two. Forms onto caul... more
5
work piece width:1000 mm Barkxgoqeq workpiece height:450 mm drill diameter:10 - 40 mm The saw drilling line consists of the drilling rig APS 1015 and the saw KBS 1001 DGNC. The dimension of the material (section steel) are a maximum of 1000 x 450 mm and at least 65 x 65 mm. There are 3 drill axes, one vertical and 2 horizontal. The drill diameter is at least 10 mm and a maximum of 40 mm at a feed rate of 20 - 200 mm / min. There are 5 tool changer positions per axis with an ISO 40 tool holder.... more
5

Bentonite mixing plant Lemme [...]

Wiefelstede, GermanyGermany dealership location
6385 km
2005
used
Bentonite, bentonite mixing plant, bentonite mixing unit mixer, mixing, injection pump, injection technique, injection system, Bentonitpumpe -2 x mixer -2 x mixing container Ø 1500 x 1500 mm (a 2 m ³) -2 x injection pump 80-100 l / min Manufacturers NEMO pump Type NM053SY04S24K Speed adjustable Control -2 x VMT monitoring Type OptiFlux 5300 C. -div tubing connector NW50 -2 x funnel on container Dimensions 2435/6250/H2770 mm Jiafbib Weight approx. 4000 kg more
1

Sawing- and Drilling Plant SCHUHMACHER

Stockstadt, GermanyGermany dealership location
6564 km
used
work piece width: mm workpiece height: mm bore diameter: mm total power requirement: kW Udgsw3v9w weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none more
1
Portable Clayfräsmaschine - ITP group Type: M-Tower transportable Year of construction: 2011 Control: ITP group Deva MC Power 450W Bcptl8waox Steep taper mount ER20 Technical data of 240 Speed range: 0-4000 min-1 Working range x axis: 3100 mm Y-axis workspace: 1300 mm Work area Z axis: 1500 mm more
1

Hardness cause plant Inductoheat Statiscan Move

Nürtingen, GermanyGermany dealership location
6677 km
2014
good (used)
Hardness system starting system with vertical motion unit Manufacturer: Zerspanungstechnik Type: Statiscan move Construction year: 2014 Control: Siemens S7 maximum workpiece diameter 150 mm (with a workpiece) 100 mm (with 2 pieces of work) Clamping length: up to 260 mm M7fwn Workpiece weight: up to 4 kg Dimensions: Lxwxh = 3,400 x 1,800 x 2.400 mm Weight: 2,900 kg . more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Gl2blvfnw Chipping Plant complete with the following components and features: -- 9’x80’ Drum Debarker with 50 HP Drive Motors. -- 120' x 24" MELLOTT Vibrating Conveyor under the Drum. -- 20 Ft. Chain Drum Discharge Conveyor. -- PRECISION 84”, 6-knife, Rear Discharge Chipper with CAT 3412E Engine. -- PROGRESS 10’x16’ Counter-flow Chip Screen. -- PROGRESS Re-chipper. -- 42" x 100' Radial Stacker. -- 30" x 60' Radial Stack... more
6
WP bread system overhauled by Werner and Pfleiderer, consisting of: Clerk PARTA UWP tapered round Weaver CCR59Gärschrank 288 bags with new KlimaautomatikLangwirker is BM51Kapazität from this line approximately 1000 per hour (250 – 1500 grams) the line can also smaller round moulder and a PARTA-ST abwieger be delivered and with larger/smaller Proofer 9mnh9daye more
5
Bentonite, bentonite mixing plant, bentonite mixing unit mixer, mixing, injection pump, injection technique, injection system, Bentonitpumpe -1 x mixer Uu0bnopgl -1 x injection pump speed adjustable Pump output 300-1200 l / h -Port funnel 715 x 530 mm Mixing bowl ø 600 x 400 mm Dimensions 2400/900/H1630 mm Weight 476 kg more
6

Screening plants Gipo ZB 1170 RV

Halver, GermanyGermany dealership location
6436 km
1999
used
Hours of operation: 9702 Weight: 53000 kg 7w70t7qbs -Inlet 1120mm x 680mm -Bunker volume approx. 6 m³ -hydr. Crushing adjustment from 70 mm to 200 mm -Magnetic -Grizzly -Belt scale -6 cylinder Caterpillar turbo engine -Capacity up to 300t / h -EPA -CE -inlet 1120mm x 680mm -Hopper volume Apr 6 m³ -hydr. Crusher adjustment from 70mm - 200mm -magnetic -primary screen Conveyor-balance -6 cylinder Caterpillar turbo engine -output to to 300 t/h -EPA -CE ... more
5

Straightening Plant UNGERER

Willich, GermanyGermany dealership location
6368 km
used
sheet width 1750 mm plate thickness 15 mm Cfpzbrr number of rolls 9 total power requirement 70 kW weight of the machine ca. ca. 25 t dimensions of the machine ca. 4750x3550x3000 m Work roll size Dia.110mm Backup roll size Dia.117mm more
5
ultrafiltration plant for separation of emulsions 9d8eg788n more
1
Elect./Voltage: 400 V, 50 Cy, 3 Ph. Bbuv9pwaim RUF RB 7.5/3000/80 Metal Briquetter (Running Aluminum)Exceptionally strong and low maintenance. Simple, compact, and can be installed almost anywhere. Designed to run (24) hours a day. If the material to be briquetted is fed automatically into the hopper, then no operating personnel are required. Recover expensive coolant fluids for reuse; lower combustion and higher melting yield than loose chips Specifications: -- Hopper with agitator and char... more
6
A used sandblasting plant for concrete elements (E.g. paving slabs) 1 piece blasting to the Roughening of small concrete elements, in good and working condition available: immediate location: East Germany price: 29.000,00 EUR net/ex location (base on negotiation) offer and all price are net and ex stock Cirbjll without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like see / how is it – standing or recumbent, subject prior sale _____... more
5
Screening plant, vibrating screen, conveyor, belt conveyor, conveyor belt, barrel, conveyor belts, sorting system, waste sorting plant, separation plant Clakutvg Delivery as is as seen Triple separation Filler funnel Hydraulically driven metering device hydraulically powered-doppeltes screen Diesel engine drive Dimensions 550 x 11000 mm belt Belt speed 105 m / min Transport axis must be welded newly 14000/1900/H2700 dimensions mm Weight approx. 6000 kg more
6

Screening plants SBM Remax 1312 ECO

Halver, GermanyGermany dealership location
6436 km
2008
used
Hours of operation: 8357 : Weight 42250 -Inlet 1260 x 840 mm -Rotor diameter 1160 mm -Output up to 300 to\h -Magnetic -prepares for Dolly -Remote control -CE -inlet 1260 x 840 mm -rotor diameter 1160 mm -output to 300 to\h -magnetic Juzsje -preliminary setup for bogie arrangement -remote control -CE -For questions about emissions standards, please contact us / / If you have questions for exhaust regulations please ask US more photos and quotes on / / more pictu... more
5
Beam size:610 x 330 mm bore diameter:27 mm Bszqmmw8 Number of drilling agregates:3 Stk. mitter cutting - all-position:45/30 ° control:Fagor roller conveyors in-/outfeed:je ca. 16.000 mm workpiece length - min.:1055 mm workpiece weight:18700 kg spindle speed max.:75 - 585 U/min drill diameter:8 - 27 mm dimensions of saw-blade:6910 x 41 x1,3 mm weight approx.:8500 kg total power requirement:35 kW feed stepless:25 - 300 mm/Min. Peddinghaus BDL600/3B CNC controlled beam drill line with bandsaw an... more
3

Inductive Hardening Plant Eldec MIND M 250

Göppingen, GermanyGermany dealership location
6699 km
2013
used
current capacity unbkt. kVA work piece width unbkt. mm workpiece length unbkt. mm Control Mitsubishi SPS System Q total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Bbyuxjhufv more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuv9zhf3n RUF RB 15/1500/150x60 Metal Briquetter (Running Aluminum)Exceptionally strong and low maintenance. Simple, compact, and can be installed almost anywhere. Designed to run (24) hours a day. If the material to be briquetted is fed automatically into the hopper, then no operating personnel are required. Recover expensive coolant fluids for reuse; lower combustion and higher melting yield than loose chips Equipped with: -- Hopper with agitator and ch... more
6
Machine for the production of doors, Windows and elements I9c8xhl with CNC axes Power 90-110 window units per shift (8 hours) Built in 2001 Machine cleaned and funktionsgeprüft more details in the annex more
6
current capacity 2400 kW Qnmetduug work piece width 95 mm workpiece length 510 mm Capacity 6000 kg/h max. temperature 1320 Grad total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more


clay brick...
daily

New machines via email!

Stay updated!

to

to

Edit search
CLAY BRICK PLANT
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close