Used Cleaning Equipment for sale (43,376)

Condition: good (used), machine/vehicle number: 2715, Year of construction: 2002, SISU FC 50 AL from Uniktruck Gsdpfoquwl Rox Afnsbh

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For consistently clean components in continuous operation Continuous flow cleaning system made of stainless steel with oil separator for uninterrupted material throughput. The parts to be cleaned pass continuously—or, if needed, in cycles—through successive treatment zones. Cleaning is carried out by passing the parts by fixed nozzle systems. Designed for components with dimensions approx. 400 x 100 x 200 mm Wire link conveyor transports the components lying flat or standing upright through the cleaning system • Surrounding nozzle frame – the offset nozzle arrangement enables all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle and frame adjustment to suit component • Customizable useful dimensions, load capacity, and pump output Process steps occur in successive treatment zones: • Spray cleaning – series connection of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank capacities: Washing tank: 800 liters Gjdpjxcun Esfx Afnjbh Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Washing tank pumps: 3.0 kW Rinsing tank pumps: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine includes stainless steel drip trays for leakage protection—these are included in the price and will be delivered with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: new, Field sprayers suitable for sewer and drain cleaning, dust control, div. on and attached to attachments with PTO or hydr. drive. Suitable for use on tractor, shovel, forklift, etc. Completely according to your wishes, ready for your application! Gedpfx Afoygnvxenjbh Condition: New

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 3,476 h, OM Crusher Apollo Year 2004 Maximum production: 240 t/h – Minimum production: 35 t/h Hydraulically adjustable jaw crusher Feed opening size: 1050x730 mm Discharge opening adjustment: 35–145 mm Gsdoyiz Tijpfx Afnobh 6-cylinder diesel engine, 186.5 kW Operating hours: 3476 Good condition Immediately available We consider trade-ins of vehicles of all makes—MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA—with CIFA, SERMAC, PUTZMEISTER equipment; or earthmoving machines from CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: new, functionality: fully functional, power: 213.29 kW (289.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range, we offer you: Equipment Carrier Logistics GW-L2 All-Wheel Drive on Off-Road MAN TGM 13.290 Chassis A vehicle for many tasks. Ideally suited for storm response as well as setting up water supply lines over long distances, even in challenging terrain such as forest and vegetation fires. Serves as a modular replacement for rescue and equipment vehicles, or with water tanks for firefighting water transport. Or... exactly right for your specific needs! Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automatic transmission • Single tires with equal track width for high off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Cab equipped with auxiliary heater Bodywork: • High-quality bodywork made from rust- and corrosion-free materials • Two spacious side equipment compartments • Fold-out steps at each side compartment • Individually customized stainless-steel equipment storage solutions Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • Two-button foot control • Dual roll-off safety locks • LED platform lights Safety and Lighting • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rearview camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the superstructure and auxiliary headlights Gbsdpfx Afjxqlmuenjh • Pneumatic LED light mast with remote control We would be pleased to provide you with a detailed quotation and present the vehicle to you at our Berlin location. All information is given to the best of our knowledge and belief, but without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range of new vehicles, we offer: All-wheel drive Equipment Transport Vehicle GW-L on off-road capable MAN TGM 18.320 chassis Our robust powerhouse for heavy loads. Its superior off-road capabilities ensure reliable performance even in tough conditions. Suitable for operations such as severe weather response, setting up water supplies, as a modular rescue or equipment vehicle—also available with winch—or as an auxiliary tanker (TLF) with water tanks. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission • Super single tires, matched track width, for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Cab with auxiliary heater Body: • High-quality bodywork made from rust- and corrosion-resistant materials • Two spacious side equipment compartments Godpfx Afoxyud Ujnobh • Fold-out steps for each lateral equipment compartment • Customizable stainless steel equipment racks tailored to your requirements Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Two-button foot control • Dual roll-off protection • LED platform lighting Safety and Lighting: • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the body and additional floodlights • Pneumatic LED light mast with remote control We would be pleased to provide a detailed quote and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This ad does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Condition: new, Year of construction: 2025, Automatic shrink wrapping machine for packaging products in shrink film with shrink tunnel. The machines are widely used in the pharmaceutical, food, cosmetics, stationery, electronics, and daily goods industries. Gjdpfx Aoyilf Tofnobh Very easy to operate machine. Very large working area. Length + height max 600mm Width + height max 500mm Max height 150mm Year of Production: 2025 Price for the set (wrapper + tunnel): 48,000 PLN net. Video link: youtu.be/WbgBJRHyAmk Katowice Packaging line Automatic packaging machine Packaging automaton Automatic wrapper Cellophane machine Automatic film wrapping machine

Condition: good (used), Year of construction: 2015, Alpha Pack bag filler. Type : AP-1BT-III Gjdpsrmm Dfjfx Afnobh Filler tube : Ø15mm Welding jaws 15cm. Year - 2015.

Condition: new, number 96 Positionen weight 600 kg condition neu 28 mm Gbjdpeygxz Sjfx Afneh Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION!!! Tools are designed for 25mm thick tabletops.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, For sale: well-maintained Stürtz SE-HSM-30/26-Compact welding machine, designed for precise and efficient PVC window and door frame welding. This industrial-grade machine is renowned for its reliability, stability, and compact design, making it ideal for small to medium-sized production facilities. The package also includes a 4AS-JC corner cleaning machine, ensuring fast and accurate cleaning of welded corners – a complete solution for PVC frame production. Key features: • Heavy-duty industrial construction • Precise and consistent welding performance Gbsdpfx Afoyi U Sfjneh • Reliable operation • Sold together with corner cleaning machine • Ready for immediate use Price: €30,000 Available for inspection and testing by prior appointment. For more information, please contact me directly.

Condition: used, Year of construction: 2000, condition gut sold only together as package ja +++++ Please note: Gsdpfex U A Uaox Afnsbh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2023, condition: new, Mobile complex for cleaning cars with ozone model Celette Trioxyclean, France. 6 units available. Fast and completely decompose harmful volatile organic compounds inside the car, such as formaldehyde, ammonia, benzene, TVOC (Total volatile organic compounds), etc., deodorize unpleasant smells of cigarette smoke, alcohol and food, effectively kill suspended bacteria and viruses, and protect passengers from cross infection. Ozone (O3) output: 5000mg/Hr Negative ion: 8 – 10 Million Ozone concentration: 15-25mg/L Sterilizer rate: 99.99% Cooling type: air-cooled Gbjdpfxeu Dpygo Afnsh Input Supply: 220/110 Volt | 50Hz/60Hz Weight: 37 KG Dimension (L x W x H) cm: 55 x 40 x 126

Year of construction: 1983, condition: used, weight 100 kg 2 Stück Gjdpfx Aew Sygyefnjbh height 700 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer Godpfx Afewyc Sijnsbh - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Condition: excellent (used), functionality: fully functional, total length: 700 mm, total height: 380 mm, total width: 1,100 mm, type of input current: AC, product height (max.): 220 mm, input voltage: 230 V, width of welding knife: 350 mm, overall weight: 49 kg, Packaging machine Minipack FM-75N Hood shrink wrapping machine Minipack with base frame Output up to 250 cycles/h Max. film width: 350 mm Connection: 230 V Godpfoyak Rrex Afnebh Used machine

Condition: good (used), functionality: fully functional, Sheet Cleaning Machine Jeros 5015/828 for 2-edge trays short side raised stainless steel design with oiling system Gbedpfxeyaklcj Afnsh DGUV V3 tested exclusively by us connection 400V, 16A CEE plug Used machine Options: sheet trolley maintenance contract service package delivery service training & commissioning spare parts box Visit us!

Year of construction: 2023, operating hours: 20 h, condition: used, functionality: fully functional, overall weight: 60 kg, input voltage: 220 V, laser power: 200 W, type of input current: AC, actuation type: electric, Technical specifications: Laser: Pulsed laser Laser power: 200W Air-cooled Dimensions: 60 cm x 28 cm x 75 cm (LxWxH) – Ideal for solo transport! Sales price includes demonstration, training, and optional after-sales support - Immediately available - Warranty Godpfxoxcf D Dj Afnjbh No dealer sales; selling due to purchase of a new device! Original price: EUR 31,500.00 net Negotiable price: EUR 15,000.00 net! Financing available for up to 6 years!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2026, 3 & 4 Edge Sheet Metal Cleaning Machine Mica Model: CBP-3 Single-operator Mobile stainless steel construction Gjdpfx Aew S Slnjfnjbh Maximum sheet size: up to 600 x 800 mm Pull-out drip tray below for easy cleaning Dimensions: 2234 x 630 x 1372 mm (LxWxH) The versatility of this tray/sheet cleaner is demonstrated by its ability to process even 4-edge trays with edge heights of up to 24 mm. Debris and dirt are collected below the machine on an easily removable and cleanable tray. The unit is fully mobile and can be easily moved to any desired location after use. The entire construction is glass bead blasted, making the surfaces as smooth and hygienic as possible. Connection: 400V, 1 kW, 16A CEE plug Weight: 205 kg Brand new equipment With warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet cleaning size up to 600 x 1000 mm Sheet greasing/oiling system Service package Delivery service Operator training & commissioning Visit us!

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included Gbodpfxoyhd Dbj Afnoh - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, Optics Make Heidenhain Type OZA II 02 - 6 Gbjdecifpmepfx Afnjh Device number 2739 Mounting distance 14,30

Condition: excellent (used), functionality: fully functional, OMT secondary impact crusher, model B.R series 2, with a completely NEW rotor, 90 kW electric motor, semi-chassis, hydraulic opening, in perfect condition – used Gbsdpfx Afsyiz Tvjnoh

Condition: excellent (used), functionality: fully functional, mileage: 835 km, first registration: 12/2017, fuel type: diesel, axle configuration: 4x4, tire size: Vorne: 11.2 R 28, Hinten: 380/80 R 38, next inspection (TÜV): 02/2028, fuel: diesel, driver cabin: other, Year of construction: 2017, operating hours: 878 h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, low noise, For sale is a well-maintained Lindner Geotrac 74 EP with only 835 operating hours. The machine is fully functional, extremely reliable, and ideally suited for year-round use – especially for municipal and winter service applications. Equipment: • All-wheel drive • Front linkage • Additional hydraulic connections (front & rear) • Comfort cab with heating and air conditioning Gbjdsyhcnfopfx Afnoh • Pneumatic braking system • Extensive lighting for safe work operations • Cruise control First registration: 19.12.2017 Including winter service equipment: • Used snow plow blade • RAUCH salt spreader Axeo 18.1 (used for only one winter season) • Tarpaulin cover • Agitator • Spreading disc • Spreading apron Tyres: • Front: 11.2 R 28 • Rear: 380/80 R 38 Approximate exterior dimensions (with current tyres): • Overall height: approx. 2,700 mm • Overall width: approx. 1,900 mm The vehicle is ideal for agricultural use, municipal operations, or professional winter service. Inspection and test drive available by appointment. Price incl. 19% VAT. Purchased locally from an authorized dealer on 12.11.2024 for €61,000. The tractor must be sold urgently, as we have switched to passenger cars/SUVs for winter service operations. The tractor was used for only one winter and is in excellent condition.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Gedpfstwmxyex Afnjbh Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, The FW series of automatic packaging machines with flow pack system, designed according to Industry 4.0 and IoT (Internet of Things) technological platforms, is the family of machines that completes the SMIPACK range. The version with rotary bar sealing system is composed of 7 models (five with top reel, three of them dedicated to the entry-level segment, and two with bottom reel) and packs a wide range of products with irregular shapes and small dimensions that arrive at the machine either loose (single doses) or previously grouped (multipack); the products are placed in packages made from single or laminated flexible material with a maximum output of 200 products/minute (depending on the selected model). The film sealing & folding systems, combined with the dynamic and adjustable forming device, make process regulation on the FW models versatile and fast. Gbedpfjyf Ed Dex Afneh

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HERMA H500, With this labeler from HERMA, top labeling is guaranteed to be precise. At both high and low speeds, this is an extremely accurate labeler! It can be combined with a conveyor from, for example, BVM or Smipack, used or new. This labeling unit can operate at speeds of up to 200 meters per minute. Godpfxjyf Ebpe Afnsbh