Used Cnc Controller for sale (45,334)

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Fpodpfx Aev Umm Iogrob Height adjustment is missing,

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle Fpjdjwmd Irspfx Agrsb - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Year of construction: 1990, condition: like new (used), Well known 'EN' brand (Taïwan) 2-axis CNC spring generator. Low investment for CNC production of easy torsion springs up to 2,0 mm. Fpedpfx Aeiz Ddksgrob

Condition: new, Year of construction: 2024, Professional CO2 laser with a 600mm x 900mm work table and a tube with a rated power of 80W reaching 90W at peak! The standard equipment includes a CW5000 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Model: 6090G Working area: 600x900mm (pass-through table in the Y axis) Rated laser power: 80W Laser power at peak: 90W Tube type/laser type: Glass CO2 laser tube Cooling type: Closed-circuit water cooling - CW5000 cooler Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 15mm depending on material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445G - a module with advanced functions providing advanced control over parameters and the processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Fjdpjtvmh Dofx Agrjpb Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 80-90W laser tube Fume extraction and piping CW5000 cooler Table knife rigid, stable steel honeycomb table Blowing compressor Power source: 230V, 50-60Hz Working environment: Temperature 0-45oC, Humidity 5-95% (non-condensed) Weight 209.65 kg + accessories ~ 20 kg Dimensions: 142x120x105 cm Machine designed for cutting and engraving in materials such as: Acrylic, leather, rubber (e.g. stamps), wood, wood derivatives, plastics, textiles, clothing, leather, glass (engraving only), marble/stones (engraving only, cardboard, ceramics (engraving only), paper, etc., coated metals (e.g. pens).

Condition: excellent (used), Year of construction: 2021, operating hours: 250 h, Description APS-2030 Quotation Entry-level model 3-axis gantry milling machine Area of application simple applications in wood, plastics, etc. Model: V-2030 Table size [mm]: 2000 x 4000 Working area X and Y axis mm 2020 x 3020 Working area Z axis [mm]: 30cm Vacuum zones 6 pieces Equipment Steel construction simple frame construction with reinforced gantry frame Switching element and control in the external control cabinet. to reduce the installation area Work table material: hard PVC Fpsdpfx Agsvy I Iwerjb Functions T-slot and vacuum plate divided into 6 sections Travel system X and Y axis rack and pinion drive Travel system Z axis ball screw (TBI) Linear guides on X, Y and Z axis PMI Travel motors servo X, Y and Z axis (Delta) Spindle 9 kW air-cooled ( max. travel speed 60 m/min max. working speed 40 m/min Working accuracy < 0.2 mm Repeatability 0.03 mm on 300 mm Workpiece positioning optional Tool length sensor yes Control Eding CNC Software Vectric CUT2D Electrical connection Electrical connection 3 phases 320 V, 50 Hz Ambient temperature 0° C -45 °C all prices quoted are net plus the currently applicable statutory VAT.

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Fpodpfxowlqpyj Agrjb Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen

Condition: used, Year of construction: 1991, CNC Machining Center weinig UNICONTROL 10 Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Comments Longitudinal saw: 2800 rpm min., 3 kW, power take-off and slot spindle: 5 x 100 mm, 11 kW, 2.800 rpm. min., 1 spindle profiling: 6000 rpm. min., 11 kW, 2. Spindle profiling: 6000 rpm. min, 11 kW. "Angle windows, machining center WEINIG UNICONTROL 10 Number of spindle spindles: 1 Number of spindles molding: 2 Length of the spindle spindle mm: 300 Xrwk8iolx Length of profiled spindle mm: 295 Separate shaft grooves: yes Fpedpfx Agedm Umlerob Continuous stroke mm: 100 Spindle diameter mm: 50 Cutting tool cutting wheel mm: 232 Cutting wheel for perforation mm tool: 360 Length of material max mm: 2,600 Equipped for profiling: yes Automatic kontherholz: yes Glaucoma: Yes Workpiece rotation: Roller transport Main engine power kW: 11 Max feed rate m / min: 8 Control: Spindle ON / OFF only Working condition: dismantled / stored "

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. Fpedpfx Aoua U Tzogrob - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 1,030 kg, rotational speed (max.): 2,500 rpm, turning diameter over cross slide: 320 mm, bar passage: 56 mm, spindle motor power: 3,700 W, mount diameter: 16 mm, spindle bore: 56 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, turning length: 750 mm, Equipment: rotational speed infinitely variable, Technical Specifications Center Distance 750 mm Center Height 160 mm Swing Diameter Over Bed 320 mm Fsdpfjwh Aiwox Agrjpb Swing Diameter Over Cross Slide 150 mm Bed Width 215 mm Spindle Bore 56 mm Spindle Mount A2-5 Speed Range, Continuously Variable 150 - 2500 rpm Travel X-Axis / Z-Axis 160 mm / 750 mm Rapid Traverse X-Axis / Z-Axis 4 / 7 m/min Number of Tool Positions 6 pcs. Tool Shank Dimensions 16 x 16 mm Positioning Accuracy ± 0.01 mm Quill Diameter 45 mm Quill Travel 100 mm Quill Mount MT 4 Motor Power 3.7 kW Machine dimensions (W x D x H) 1910 x 1150 x 1840 mm Weight approx. 1030 kg

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Fodevkc D Ijpfx Agrepb Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Fpsdpfxjp U Umkj Agrob

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Fpjdpfeq U R T Nox Agrob Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: new, Year of construction: 2023, safety matsafety mat for CNC Allen Bradley Lignum new .thickness . series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol Vinyl, IP67 at Allen Bradley safety mat, length 1.5m, width 1m - 440F-M2030BYNN The Allen Bradley Safety Mat from Rockwell Automation is a safety device that detects the presence of a person in dangerous locations. It can be connected to the control circuits of industrial machines in dangerous spaces, creating a protected area measuring 1.5m (length) x 1m (width). When the layer's detection surface detects a person, it sends a signal that shuts down the machine, preventing injuries and improving safety in the workplace. The durable vinyl material can withstand bleach, acids, and other industrial chemicals, making it a good choice for use in harsh industrial environments. This mat is commonly used to restrict access to hazardous areas in factories. Features and Benefits • Hardened steel plate construction for added durability • 4-wire open and short circuit detection system for added electrical safety • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications Standards and Certifications • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe for use in damp or wet locations? IP67 rated CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat has an IP67 (ingress protection) rating, meaning it is protected against dust and can be water resistant for up to 30 minutes. This makes it safe to use in damp locations. Technical data Attribute Parameter MatGuard range Series 440-F Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Vinyl plastisol IP class IP67a for CNC Allen Bradley Lignum 1600x 800 Fpjdpfx Agowkrxtsrob

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions Fpodpfx Agjvvwblerob - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel - Remote support on machine – allows remote diagnostics

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm Fodpfsxdmgvex Agrjpb CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Fpjdjq U Sa Sepfx Agrob Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Fjdpfx Ajq U R Ruegrjpb Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft * Fpodpew Dufiofx Agrsb

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Fpsdpox N Ncgofx Agrsb

Condition: new, Year of construction: 2019, ABB IRB1660ID+Controller+TPU+Cables Brand New DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Fedpfx Aexq Ttpsgropb

Condition: good (used), Tool trolley with inserts with turning holder for NC lathe, Fpjdpex H Tu Uofx Agrsb Shaft: 50 mm

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) Fpedpfox Hyhbex Agrjb • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, Year of construction: 2025, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer! Fedpfx Ajwnz Apjgrjpb

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 Fpedpfepy A Iuex Agrjb - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: good (used), Tool trolley with inserts Fpodpfsx H Nlvjx Agrsb with turning holder for NC lathe, Shaft: 50 mm