Used Cnc Controller for sale (48,300)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 250 mm, turning diameter: 210 mm, spindle bore: 100 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 1,355 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 370 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,675 mm, total length: 4,400 mm, total width: 2,100 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, We offer this very good Biglia BV 210 CNC vertical lathe, year of construction 2005. Ncedpfozbdgcsx Ahfou If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 008647, X axis working area: 3650 mm Y axis working area: 1500 mm Working Table: Flat table Main Electrospindle power: 8.5 KW Number of controlled axes: 3 axes Nodpfx Ajzdquwehfecu Total number of drilling spindles: 26 Total number of tool changer positions: 12

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder Ncsdpfjwcfgbjx Ahfou 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2003, 2003 CMS, model Pentax 4.50/T/PX5, CNC cutter, gantry bridge type, working table area 205.5" x 55.5", pendant control, spindle speed 18,000 RPM, spindle connection HSK63E, double automatic tool changer with 16 places, chip removal, Zongo V-Link CNC controls, 480V, 3 phase, includes EATA industrial chiller, (1) 2003 Travaini pump system, model 0-616VN1A-400, and (1) Becker rotary vane vacuum pump with filter, includes control cabinet, winning bidder responsible for proper removal. Njdexdc Ucjpfx Ahfjcu

Condition: used, Year of construction: 1995, 1995 CMS, model NC-P.F./102-2TCU, CNC, X-travel 141.7", Y-travel 63.0", Z-travel 15.7", dual tables with individual plates, plate sizes are 60" x 60", 10 HP, spindle speed up to 18,000, Allen Bradley control station, 480V, 3 phase, bridge gantry style design, 480V, 3 phase, S/N 1397, winning bidder responsible for proper removal, also includes Becker Vacuum rotary vane pump and filter, and control cabinet. Nedpfx Ahexdddfefscu

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Nodjxdc T Sepfx Ahfocu

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Nsdpfx Aortrlzjhfocu Stack Light

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Ncedsw Nytnspfx Ahfou Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Njdpfx Aev Nw Npohfocu Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Nedpfewwarusx Ahfecu Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm Nedpfx Aevzln Rohfecu spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: used, machine/vehicle number: 008397, X axis working area: 3650 mm Y axis working area: 1520 mm Working Table: Flat table Main Electrospindle power: 12 KW Nsdpfx Aex S Epbjhfscu Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Ncedszhaqvspfx Ahfeu Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: good (used), Year of construction: 2013, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret Nodjwnfzcspfx Ahfscu 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, maximum machining length 175mm, spindle power 7.5/5.5Kw , spindle speed 5,000rpm, 8 station turret, Ncsdpfx Ahozg Egmofeu milling speed 5,000rpm, Fanuc OI-TD control, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, Ncodpfjzg Efisx Ahfeu 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, Ncjdpfezg Edlex Ahfeu maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter,

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Ncsdpfx Aezg Eb Djhfeu Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Condition: good (used), Year of construction: 2007, Max. cutting diameter 340mm, Nodjzg Eayspfx Ahfecu max. cutting length 400mm, 66mm Bar capacity, Spindle speed 4000rpm, spindle motor power 22kW, milling speed 4,000rpm, 12 Station Turret, FANUC 32i Control, parts catcher, parts conveyor, swarf conveyor, 3 jaw Chuck, coolant

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Nedozfac Tspfx Ahfocu Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: good (used), Year of construction: 2000, Well-maintained, used CNC lathe from Okuma. Type: LT10-M Capacity: ø 210 x 130 mm Nodpfx Aszhal Hjhfocu Spindle bore: ø 53 mm Okuma OSP-U100L control system Further specifications can be found in the data sheet.

Condition: good (used), Year of construction: 2000, Used CNC lathe by Emco Padovani Type Emcomat E 300 x 3000 Fagor CNC control system Turning diameter over the bed: Ø 550 mm Turning diameter over the cross slide: Ø 340 mm Distance between centers: 3000 mm Double chuck, front: Rota with quick-change jaws Spindle nose: Camlock 8 Ncjdpszhaixjfx Ahfsu Maximum spindle speed: 2500 RPM Tool holder: 4-way Parat Gr. 3 Includes 2 steady rests, various tool holders, and chuck jaws.

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length Ncsdpfxozd Utws Ahfeu 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Condition - Good

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Nodpfx Astqfv Iehfecu Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: good (used), Infotec 1008 Rotary CNC machine Nodpfjx Ai T Njx Ahfscu adjustable RPM, manual or auto, 3Ph