CNC - Machining Center - Horizontal

TOYODA FH 630 SX

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Njdoxvw I Iopfx Akqjcr Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] Ncjdpfxjx Tvize Akqer WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Ncodpfst I Ec Dex Akqjr Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center Nsdpfx Akexap Eaoqocr - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: ready for operation (used), Year of construction: 2023, number of axes: 9, This 9-axis NAKAMURA-TOME WY150 was manufactured in 2023, featuring a turn-mill centre with a comprehensive toolholder setup including 6 external, 4 internal, 3 radial rotating, and 12 axial rotating holders, plus a collet chuck and a 3-jaw chuck. Consider the opportunity to buy this NAKAMURA-TOME WY150 turn-mill centre. Contact us for more information. Additional equipment • 6 external toolholders • 4 internal toolholders Nedpfxeyb Sako Akqjcr • 3 radial rotating (driven) toolholders • 12 axial rotating (driven) toolholders • 1 collet chuck • 1 three-jaw chuck

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm Njdeyy A N Uepfx Akqscr travel -z axis 450 mm control HEIDENHAIN - TNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 Nsdpfxjquuvro Akqjcr 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Nsdoymcvmjpfx Akqjcr Taper Size HSK 63

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm z-travel 375 mm total power requirement --- kW Ncjdsycxihopfx Akqer weight of the machine ca. 7,6 t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Nedpfxsx Awzbe Akqscr Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.