Cnc heavy duty lathe buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Heavy Duty CNC Roll- Turbine Shaft Lathe WALDRICH SIEGEN, max. turning dia 1.600 mm, max. turning lengths 7.500 mm, max. work piece weight between centers 30 t, hydrostatic guide ways in X and Z axis, hydrostatic worm drive for turning carriage, , remanufactured with SINUMERIK 840 C, top condition like new, 1 steady, 1 chip conveyor, is dismantled and can be inspected in our warehouse in Bergneustadt Cpodkmnx3 more
5
gebr. CNC flatbed - heavy lathe with motorized sliding upper bed and CNC railway control Siemens 810 T TECHNICAL data tip height 760 mm Maximum turning diameter ue. Bed in normal chisel position 1050 mm 1600 mm turning diameter over slide plan Turning diameter in the recess 2150 mm Peak width at retracted bed 4000 mm centre distance maximum extended bed 5600 mm Slot length (extended upper bed) 1600 mm Ye03hoypc Bed width 850 mm plan slide adjustment 850 mm spindle speed (3 reduction sta... more
6
Technical Data CNC-Heavy Duty Lathe manufacturer HEYLIGENSTAEDT type NDKb-800/III/16 x 6000 built 1977 / Retrofit 1996 control SINUMERIK 820 swing diameter over bed 1.580 mm swing diameter over cross slide 1.280 mm Face plate diam. 1.400 mm distance between centers 6.000 mm spindle speed main spindle 2,8 – 340 min-1 gear steps 4 max. torque main spindle 20.000 Nm power main spindle 63 kW spindle bore 75 mm tailstock ø tailstock quill 250 mm Spidicd7 quill stroke 200 mm quill taper DI... more
6
Heavy Duty Lathe WOHLENBERG: VDF U900S CNC - turning diameter 900 x 4300 mm / Wohlenberg Yy97t3vhp - turning diameter over bed, mm 900 - turning diameter over cross-slide, mm 530 - workpiece length, mm 4300 - spindle speeds, RPM 3.55-710 - workpiece weight, kg 8000 - main drive power, kW 40 more
6
Technical Data CNC-Turning-, Milling-, Boring Centre manufacturer MAX MÜLLER type MDW 20 M x 3000 built / put into operation 2000/01-2002 control SINUMERIK 840 C working area: swing diameter over bed 850 mm swing diameter over longitudinal slide 690 mm distance between centers 3.050 mm turning length 2.960 mm main spindle size 15, DIN 55026 ø in front bearing 200 mm max. speed 1.800 min-1 gear steps 4 (7-250, 14-490, 28-1.000, 56-1.800 min-1) power on 100/60 % ED 60/71 kW torque 1. gear s... more
5
Heavy duty lathe VDF U1070S CNC - turning diameter 1070 x 4300 mm / Wohlenberg turning diameter over bed, mm 1070 turning diameter over cross-slide, mm 710 Hjn2zjp workpiece length, mm 4300 spindle speeds, RPM 3.55-710 workpiece weight, kg 8000 main drive power, kW 40 more
5
This machine is the popular SWEDTURN ST12 type. This machine has undergone it's first complete machine refurbishment: slideway regrind, mechanical and electrical rebuild and in this example the original SMT C300 control and servo drive have been removed and the machine has been retrofitted with FANUC Oi control and FANUC servo drive. Cpvmv7uk The FANUC 0i control retrofit has been designed to make full use of the SWEDTURN I/O interface which greatly reduces installation time and can satisfy the... more
6
turning length: 6000 mm turning diameter over bed: 1000 mm workpiece weight: 30000 kg faceplate diameter: 1100 mm control: Siemens Sinumerik 840 D turning speed range: 0,71 - 140 rpm feeds - longitudinal: 0,16 - 200 mm/min feeds - cross: 0,16 - 200 mm/min rapid traverse: Plan 1,5 / Längs 3 m/min Weight approx.: 50000 kg Dimensions (l x w x h) approx.: 13300 x 3550 x 3270 mm Description: Schehr Meuselwitz DXWK 1000/3 Heavy Duty Lathe Retrofit with new electric and CNC-control in 2012 Scope of s... more
6
Stocknumber 1010060 Type of machine CNC Turning and milling machine Make TACCHI Type HD 3- 140 LS CNC Build in 2003 Type of control SIEMENS 840 D Turnung diameter over bed 2000 mm Turning diameter over slide rest 1500 mm Turning lenght 20.000 mm Spindle hollow 150 mm Speeds (Rpm) 1 - 360 Tailstock taper stroke 200 mm Max. load Max. 35 ton Ohne lunetten Vjmkaca2e Additional information: Machine free dec. 2015/jan. 2016 With 3 steady's, incl milling unit more
6
VDF WOHLENBERG CNC CNC FAGOR 8055 Max. Swing diameter 920mm. Turning length 10,000 mm. Turning diameter 530 over saddle. Max 700 rpm. 2 step automatic gearbox. 9br0z7w8n Spindle power 37 kilowatt. 3 pc steady rest 2 pc of boring holders 1 pc bracket for following steady rest. Chip conveyor. Modernised October 2009 with new electric and new electric cabinet and FAGOR 8055 TC. Ballscrew on X. Pinion and rack on Z (without backlash system) Fysical machine dimensions: Width 2,8 meter Length 13,9 m... more


cnc heavy ...
every day

New machines via email!

Be informed!
5
CNC Heavy Duty Lathe Maker : Mackintoshi-Hemphill Yrlxng Year : 1995 System : Fanuc 21i-T Specs : 2800Φ x 16,000mm Chuck Size : 2800Φ x 350T X-axis 16,000mm x 100Φ ball screw Y-axis : 1600mm Max swing on the bed Bed ways : 4 x flat type Quill : 500Φ x 450mm strok Main motor : 150HP Working under power more
4
incl. clamping device · incl. 12 panel revolver · incl. chip conveyor · incl. I/F for bar loader · incl. partial counter · incl. interface for bezel SLU2 (with bezel carrier) · incl. signal lamp with 3 lights· incl. 5 bar pump · incl. documentation if available 9ckro7evk more
4
Maximum weight of the workpiece 25000 kg Maximum diameter of the product over the support 900 mm Maximum diameter of the product over the bed mm 1250 Number of tools 12 The length of the workpiece mm - 10000 Limits including forward and reverse rotations of the spindle rotation / min 1.6 - 200 Tapping: mm Vrbcpm - Metric (step) 1 - 96 - Inch (threads per 1 ") 20 - 3/8 Serves longitudinal slide: mm / rev - At all levels of 0.064 - 3.26 - I and II levels of up to 40 rev / min 0.064 - 26.08 Rapid ... more
6
turning length: 8000 mm turning diameter over bed: 1600 mm turning diameter over slide: 1200 mm workpiece weight: 20000 kg 9pvt7mlcl faceplate diameter: 1200 mm diameter: 1600 mm control: Sinumerik 840 D / S turning speed range: 30-1400 rpm feed range: 0,075-1,00 mm/r feeds - longitudinal: 0-6000 mm/min feeds - cross: 0-6000 mm/min rapid traverse: 6000 m/min total power requirement: 7,5 kW Weight approx.: 50000 kg Dimensions (l x w x h) approx.: 17000x5350x3500 mm Description: TORNI TACCHI HD 1... more
6
X: 12000 mm Y: 3000 mm Z: RAM : 500 mm 3r3w2wi39 spindle distance Z : 1200 Control: Heidenhain type VRZ 650R Part weight: 20000 kg Extra capacity:fast speed : 2000mm/min Spindle: Ø 150 mm feed rate: 2,5 -1000 mm/min Power strength: 62 KW ISO:SK50 more
6
Control SIEMENS 828D (NEW) Year 1980 Centre Distance 5.000 mm Max. Swing over Bed Ø 2.240 mm Max. Swing over Cross Slide Ø 1.790 mm Spindle Bore Ø 105 mm Max. load 30 Tons R.P.M. 0,5 – 250 (16x) kW 75 / 110 Volts 380 2tw0snv Cycles 50 Including: 4-jaw chuck Steady rest more
6
Completely overhauled 1999-2000 Control: Heidenhain Manual Plus CNC Swing diameter over the bed: 1260 mm Swing diameter over the cross slides: 1000 mm Turning length: max. 7000 mm Bed length: 8500 mm Centre height: 630 mm Work piece weight between centres: max. 20000 kg Bt7u7v3l Work piece weight between centres with steadies: max. 30000 kg Feeds: X 0 - 1440 mm/min. Z 0 - 3600 mm/min. Spindle drive motor rating: 56 KW Spindle speeds: 0.56 - 280 rpm Chuck diameter: 1260 mm Chuc... more
4
CNC LATHE KRAMATORSK 1680 2.500x19.000 2500 mm diameter on the bench Diameter over carriage 2200 mm Spindle diameter (with 4 new independent label) 2500 mm Distance between centers 19000 mm Width of 2300 mm pallet 4 guides Permissible weight between centers 100 ton Speed 0 to 130 RPM Engine power 140 kW Tailstock spindle Ø 400 mm Bezel roller Ø 400 ÷ 2300 mm new Ball Screws new XO 80 mm transverse axis CNC FAGOR 8055 TC New Wear-resistant material on all sliding parts; Two indep... more
1
- three guideways bed width 1600mm - swing over bed 2240mm - swing over cariage 1800mm - distance between centers 12000mm - CNC: Sinumerik 840D sl - load capcity b.c . 30000kg - with one steady 35000kg - 8 pos. horizontal turet head SAUTER, size 40 - with two steadies 40000kg Yv90khoza Equipped with 3 pcs of steady rests The lathe is presently overhauled and will be available for testing and sell within 4-5 months. more
5
Maker : Kramatorsk System : Siemens Specs ; ¢3,600 x 20,000 Bed ; 4way 2200 width Chuck ; ¢2,200 + ¢3000 Deyar02ga Main Motor ; 100kw Raised and extended from original 2,000 x 12,000mm Max work piece weight ; 150t Equiped with ; Roll Steady rest 1set Machine year ; unknown, retrofitted in Germany at 2003 more
5
Maker : Hankook Vk0pjwq0b System ; Fanuc - 32i Specs ; ¢2,600 x 6,000 Chuck size ; 2,300 Bed ways ; 3Way / 1,600 width Main Motor ; 95kw Tail stock quil ; ¢400 Machine year ; 2009 Under Power in Korea more
6
turning diameter over bed 1880 mm turning diameter over slide rest 1500 mm turning length 6000 mm spindle turning speed range 1 - 250 U/min turning tool - shaft cross cut 40x50 mm longitudinal adjustment 6000 mm cross adjustment 810 mm rapid traverse longitudinal 4000 mm/min rapid traverse cross 2000 mm/min controlled axis 2 main drive motor 80 - 130 kW bed width 1350 mm threading metric 1 - 120 mm/Stg. 7ijaehemo threading WHITWORTH 28 - 0,25 TPI thread - module 0,5 - 30 module Control Sinumer... more
5
turning diameter over bed:1850 mm turning diameter over slide rest:1370 mm turning length:3000 mm weight of the machine ca.:23 t faceplate:1200 mm Wqbdpv0re Heavy duty machine with big spindle hole 206 diameter. Retrofitted with new electrics and feed motors in 2008. Under power in our warehouse. Specifications and photos enclosed. CENTERS HEIGHT 900 MM CENTERS DISTANCE 3.000 MM MAX. Æ OVER BED 1.850 MM. MAX. Æ OVER SADDLE 1.370 MM. MAX. Æ OVER GAP 2.150 MM. GAP LENGHT 780 MM. BED WIDTH 1.00... more
6
turning diameter over bed 2000 mm turning diameter over slide rest 1580 mm turning length 5000 mm spindle bore 130 mm spindle head DIN55026 A15 drive of main spindle 22 kW turning speed range: 21 Stufen 2-200 U/min longitudinal feeds: 0,1-12 mm/U face feeds 0,05-6 mm/U tailstock - quill dia 180 mm tailstock - travel of quill 300 mm tailstock quill taper metric 80 mm faceplate diameter 1600 mm Pspgny weight of the machine ca. 21 t dimensions of the machine ca. 8,4x2,4x2,8 m more
3
turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,[...] 4 steps U/min feed:: längs:0,06-17,56/ 96 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Late with shop turn L... more
6
turning diameter over bed 1500 mm turning diameter over slide rest 1100 mm turning length 13000 mm control SIEMENS 820 T faceplate turning speed range 0,9 - 315 U/min max. workpiece weight between centres 14000 kg main drive DC 42 kW total power requirement 65 kW weight of the machine ca. t dimensions of the machine ca. m 2qthxq - CNC control SIEMENS 820 T - increased center height 1500 mm - positioning of faceplate by M-function or manual in inching operation with digital read out - add... more
4
- control FANUC Series oi-TD - hand panel - turning diameter over bed: 1600 mm - circulation diameter over slide: 1210 mm - turning length: 5000 mm - bed width: 970 mm - spindle speed: 3- 315 rpm - spindle bore: 128 mm - motor power: 30 kW - tops height: 800 mm - spindle nose: A 215/8 x M22 - tailstock 9qulwfwnq - quill diameter: 160 mm - quill stroke: 300 mm - tool holder MK: 6 - face plate with 4-jaw-chuck / diameter: 1250 mm - steady rest opening: 550 - 860 mm - 4 stations tool changer - ... more
5
turning diameter over bed 1420 mm turning diameter over slide 1300 mm turning length 8000 mm centre distance 8500 mm faceplate diameter 1100 mm travel of upper support 500 mm workpiece weight max. 45.000 kg centre height 790 mm spindle turning speed range 0,6 - 48,2 U/min power capacity 110 kW weight of the machine ca. 52 t dimensions of the machine ca. m Ei9wofoli retrofited in 2006 by SUSTRAI The retrofitting consisted in the substitution of the electrical boards, and the saddle was fitt... more
5
turning diameter over bed:1580 mm turning diameter over slide rest:1260 mm turning length:6000 mm spindle speed:: total power requirement: kW face plate: steady fixed: follower rest: Cw70kdgw : Used Heavy Duty Lathe, Make Gurutzpe, with the following features: Height of centers 800 mm Distance between centers 6000 mm Maximum swing in gap 1970 mm Maximum swing over cross-slide 1260 mm Included accessories: 2 steady rests 1 mandrel 3 bit 1 tray 4 bit Ø 1000 mm 1 follow rest ... more
6
turning diameter over bed 1250 mm turning diameter over slide rest 900 mm turning length 12.000 mm turning speed range 1.: 1,4 - 71 U/min turning speed range 2.: 6,3 - 315 U/min feeds - longitudinal 36n: 0,125 - 48 mm/min feeds - cross 36n: 0,05 - 19 mm/min thread - inch 33: 24 - 1/2 inch. Bd8zuf7do thread - module 11: 2 - 5 mm thread - mm pitch 29: 1 - 50 mm rapid traverse of slide 3.600 mm/min electrics - voltage/frequency 380/50 V/Hz weight of ... more
5
turning diameter over bed: 1900 mm turning diameter over support: 1550 mm centre distance: 6000 mm center height over bed: 950 mm control: Tour Num 1060 max. workpiece weight between centres: 16 t faceplate diameter: 1700 mm faceplate rpm:: 1,2 - 100 / 16 step U/min spindle passage: nein feed:: (längs) x-Achse=0,24 - 12 mm/min feed:: (quer) y-Achse=0,12 - 6 mm/min tailstock quill diameter: 200 mm quill stroke: Reitstock: 300 mm tailstock taper MT: Ø 100 mitlaufende Spitze mm bed track: 3 Stück t... more
4
turning diameter over bed 2200 mm turning diameter over slide rest 1800 mm turning length 5000 mm centre height 1100 mm faceplate diameter 2000 mm 413/609,5 mm bed width 1800 mm diameter of quill 175 mm Lv8kh workpiece weight max. 25 t turning speed range 1,5 - 120 U/min control NUM 750 total power requirement 38 kW weight of the machine ca. 40 t dimensions of the machine ca. 10,0 x 2,98 x 2,82 m acc.: 1 closed steady, 1 open steady, tool holder, boring bar holder - machine is working in ... more
6
This machine can be visited with us in the camp under power. High lead and train spindle lathe with 3 guides converted to CNC in 2000 with c axis and milling head / technical data: Control: MANUALL plus 4110 Tip height 1200 mm Centre distance 8000 mm Bed width 1600 mm Faceplate diameter 1750 mm Turning diameter over bed guides 2400 mm Swing over cross support 2080 mm Cross carriage movement 1200 mm Longitudinal adjustment of the upper carriage automatically 400 mm Cross traverse of t... more
6
turning diameter over bed 1200 mm turning diameter over slide rest 830 mm turning length 3000 mm spindle turning speed range 20 - 660 U/min rapid traverse longitudinal 7500 mm/min rapid traverse cross 5000 mm/min main drive motor 56 kW bed width 692 mm Control Siemens 840 D workpiece weight max. 6000 kg Badvadplhy max. workpiece weight between centres 4000 kg faceplate 0 mm x-axis 750 mm spindle head A2-11 spindle bore 160 mm tailstock quill diameter 125 mm tailstock quill stroke 350 mm tails... more
5
turning diameter over bed:2600 mm Uc0jt7zkp turning diameter over slide rest:2200 mm turning length:5000 mm faceplate:2050 mm number of spindle speeds:0,7 - 70 rpm total power requirement:ca. 22 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm more
6
A heavy-duty lathe of the manufacturer Progress I 820 is offered here with motorized fast feeds and digital display. The machine is in a good condition can be viewed and tested in our warehouse. The scope of delivery includes a Lynette, 1250 planar disk, multifix steel holder with inserts, Heidenahain digital display, as well as the documentation. Technical specifications: Manufacturer: Progress Type: I 820 Year of manufacture: 1977 Workspace: Circular diameter over bend: approx. 1400 mm Circ... more
6
Drehdurchmesser ueber Bett Turning diameter over bed 1420 mm Drehdurchmesser ueber Support Turning diameter over saddle 1060 mm Drehdurchmesser in der Kroepfung Turning diameter in gap 1700 mm Bozl0nwa Durchmesser der Planscheibe Face-plate diameter 1200 mm Drehlaenge Turning length / between centers 8000 mm Breite der Kroepfung vor Planscheibe Width og gap before face-plate 450 mm Breite des gehaerteten Bettes Width of hardened bed 850 mm Spindelbohrung Spindle hole 150 mm Spindle speeds 24 M... more
6
SKODA SUT 200 x 8000 mm 3 bed way - Make : SKODA Pilzen CZ - Typ : SUT 200 T / 8 - Age : OB 2262 - Mach.No. : 1983 / 2002 - Max. turning Ø over bed : 2.020 - Max. turning Ø over carriage : 1.600 - Centre height : 1.000 - Centre distance : 8.000 - Work load between centre : 63.000 - Turning speeds 4 steps : 0,35 – 180 Rpm Bf8h2snk - Feed / Stroke Long : 0,1 – 1500 / 1000 - Feed / stroke Cross : 0,1 – 2000 / 500 - Motorised tailstock - Pinole Ø : 400 - Stroke : 250 - Adjustment speed : 2... more
6
maximum circulation - Ø: 3300 mm Zazt90tb maximum turning length: 11000 mm maximum circulation - Ø over carriage: 2600 mm Number of bed sleigh 2 Ø - face plate: 3000 mm Workpiece load betw. Top 45-50 to. Workpiece load with rests approximately 60-70 to. Specialities: Adapted grinding unit, aspirator and 2 x bezel. Weight approx.: 120 to. more
6
Swerdrehmaschine Skoda SRM 1250 x 7000 turning diameter: 1250 mm turning length: 7000 mm turning diameter over bed: 1250 mm Diameter above transversing slide: 900 mm max length of the workpiece: 7000 mm spindle speed: 1.4 - 315 u min-1 width of the bed: 1100 mm max workpiece weight : 14.000 kg main drive power: 37 kw Jtywhq more
3
turning diameter over bed:1800 mm turning diameter over slide rest:1450 mm turning length:6000 mm Uc0j7o88q centre distance:6000 mm spindle speed::1,2 - 240 total power requirement:75 kW Bed: 4 guides High of centres: 900 mm Distance between centres: 6000 mm Swing over cross slide: 1450 mm Spindle power: 75 Kw Spindle speed: 1,2 - 240 rpm Turret: square Control on the carriage Width bed: 1150 mm Tailstock Platform: diam. 1800 mm Steady rests Capacity 20 ton more
6
WMW Zerbst 3 bed way lathe - Make : WMW - Zerbst - Typ : DPS 1800/1 - Age : 1976 - Mach.No. : 35 - 0462 - Center height over bed : 1.000 Ptjspj7w - Swing over cross ca. : 1.800 - Center distance : 5.000 - Chuck - Movement support : 5.000 - Movement tool post : 800 - Movement top slide : 600 - Max. load between centers : 8.000 Kg - Max. with 2 steady’s : 20.000 Kg - 4 chuck diam. : 1.250 - Number off jaws : 4 off - Speed range 18 x : 2,24 – 112 Rpm - 3 bed way construction - Power r... more
6
Heavy duty lathe SR 1600/8000 - turning diameter 1600 x turning length 8000 mm / SKODA - turning diameter over bed, mm 1600 Gseavuvoc - turning diameter over cross-slide, mm 1220 - workpiece length, mm 8000 - spindle speeds, RPM 1.8-355 - width of bed, mm 1700 - workpiece weight, kg 40000 - main drive power, kW 110 more
5
turning diameter over bed:1600 mm turning diameter over slide rest:1050 mm turning length:6000 mm work piece weight:t t Gugv9g Used Lathe with extensive accessories. Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it. more
6
WMW ZERBST Ø 1800 x 7000 Lathe - Make : WMW Zerbst - Typ : DPS 1800 / 1 - Age : 1976 - Mach.No. : 35 - 0462 - Swing over bed : 1.800 - Swing over cross : - Centre height : 900 - DBC : 7.000 - 4 chuck Ø : 1.800 - Movement support : 8.000 Xz0vs27ji - Movement tool post : 800 - Movement top slide : 600 - Max. work load : 12.500 - Turning speeds 18 : 112 Rpm - Feed rate : - Rapid feed : - 3 bed way construction - Motorised tailstock - Threat cutting over worm - Dimension - Length : - Wid... more
5
turning diameter over bed:1350 mm turning diameter over slide rest:1050 mm turning length:8000 mm spindle bore:120 mm Ltroh total power requirement:27/41 kW weight of the machine ca.:16,5 t Rebuilt: 2014 Condition: as new Max Swing Over Bed: 1.350 mm Max Swing Over Carriage: 1.050 mm Max Swing in Gap: 1.650 mm Distance between centers: 8.000 mm Number of spindle speeds (21 levels): 5 ? 500 [...] Spindle hole: 120 mm Load Capacity without steadies: 9 Ton Load Capacity with two steadies: 14 Ton ... more
6
Heavy Duty lathe SKODA SRM-100 - Make : Skoda CZ - Type : SRM 100-5000 - Age : 1976 - Mach No. s/n : Ob21111 - Swing over bed : 1.000 - Swing over support : 760 - Center distance : 5.000 - Width off bed : 950 Fc0k8t9pa - Spindle hole : 120 - Work load between center : 10.000 - Load with 1 steady rest : 14.000 - Speeds : 1,8 till 400 Rpm. - Feeds : 0,125 till 48 Rpm. - Rapid : 3.600 mm/min. - Dimensions - Length : 8.600 - Width : 2.100 - Height : 2.200 - Weight : 15.200 Kg - Incl. 4 ch... more
5
Giana Heavy Duty Engine Lathe, Made in Italy Model GFP-12 Year 1980’s Location Toronto, ON Machine is under power Condition: Excellent, Guide ways are great! Technical Specifications (Subject to Verification) Swing over Bed Ø 1200 mm Swing over carriage Ø 800 mm No Gap Distance between center 3,000 mm Spindle bore Ø 120 mm Spindle Speeds 6-600 4-Jaw Chuck 800 mm Steady rest Ø 6.5" to 12" Steady Rest Ø 16" Tail Stock quill dia Quill Taper MT-6 8lpkyqulz Equipped with • Chip Tray and coolant ... more
3
This machine will be sold by Yoder & Frey at an unreserved auction in Ashland, USA on December 7th 2017. For more information contact our office. Jusbsa more
3
Heavy duty centre lathe. 12 station automatic tool post. 44KW spindle drive motor, belt driving a 2 speed range headstock gearbox. Fully enclosed construction with heavy duty swarfconveyor Itfznw2 This machine has under gone mechanical and electrical rebuild since new. This machine can be retroffited with FANUC controller to better suit the customer's enquiry. more


cnc heavy ...
every day

New machines via email!

Be informed!

to

to

Change search
CNC HEAVY DUTY LATHE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close